[ajsti24]

Japanparts part number 333-006-007-2 Bilsteins for the WRX-S4 VAG

Japanparts part number 333-207-018 Bilsteins from S207 (Comfort Valving)

Japanparts part number 333-006-007-1 Bilteins for STi-type-S: i would get these set.

Yeah you can get the STi pink springs either for the KYB struts or Bilsteins, i think the only difference is the rear spring rates.

STi Springs:

Fronts are the same for 15-17 STi
コイルスプリング F（A～Cタイプ）：WRX STI（VA）｜パフォーマンスパーツ｜STI

Fronts for 2018+
コイルスプリング F （Dタイプ～）：WRX STI（VA）｜パフォーマンスパーツ｜STI

For the KYB Struts:

REARS: コイルスプリング R(WRX STI KYB用）：WRX STI（VA）｜パフォーマンスパーツ｜STI

For Bilsteins Struts:

REARS: コイルスプリング R(WRX STI ビルシュタイン用）：WRX STI（VA）｜パフォーマンスパーツ｜STI

Yeah i got confused to so i looked up on the STi japan website

 

[ajsti24]

What's the difference between the JDM control arms. I was looking at my OEMs and the angles look about the same. Maybe bushings? I see you have solid ones.

JDM STi Lateral Links comes with pillow ball bushings pressed in.

 

[ajsti24]

Would these springs work on my 2017 Sti? I wanna lower my car slightly but would like to have that Oem look and reliability.

It will work but i recommend you to get a 2017 STi specific JDM STi pink springs to match your 2017 struts/shocks same drop as the 2018's pink springs.

 

[ajsti24]

Anyone got a stock ride height picture of 2018? AJ? I didn't snap any, but I can snap some of the springs now on.

I wish I could find out the stiffness.

My stock ride height: BriEE, waiting for your side shots!

 

[ajsti24]

So.. I have to take the springs apart again..

Fuck me.

The bumpstops really need to be cut down the first notch like RCE Blacks/yellows, I forgot how the VA chassis, like GR, is basically riding on bumpstops at stock height, especially the rears.

These lower a significant amount so even if instructions don't say it, I'd do it, because the ride is not good right now.

Thanks for the side shots!! Might get a set of pink springs soon!