IW STi Forum banner

1 - 20 of 84 Posts

·
Registered
Joined
·
2,256 Posts
Discussion Starter #1 (Edited)







Engine
  • Garrett GT3076R 0.63 AR
  • Cosworth 8.2:1 99.75mm forged pistons
  • Manley H-Tuff forged rods, stock length
  • ACL H bearings
  • ARP head studs
  • Custom 4" intake
  • Perrin FMIC (Black) with custom piping
  • Tial Q BOV (red)
  • STi-lin' rotated turbo adapter
  • grimmspeed 3-port EBCS
  • Custom rotated downpipe w/ GESi UHO EPA certified catalytic converter
  • ID 1000cc injectors on T1 top feed conversion rails
  • JDM TGV deletes with Cosworth phenolic gaskets.
  • Killer B oil pan, pick-up & baffle
  • Killer B Holy Header and up-pipe, custom EWG by ASF
  • Moroso dual catch cans
  • DW 340lph fuel pump feeding Radium surge tank w/ 450lph Walbro
  • Aeromotive adjustable fuel pressure regulator
  • SPT catback w/ 2.5" portion cut out and replaced with 3"
  • Cobb AP V2
Suspension/wheels/brakes
  • Work CR Kai Matte Gunmetal 18x8.5 +43 w/ Bridgestone Potenza RE-11 255/35/18 blue lug nuts
  • KW V3 coilovers with Group N rear tops and Vorshlag front camber plates
  • Carbotech xp10/xp8 pads, stoptech SS brake lines + Castrol SRF
Drivetrain
  • Group-N Engine mounts
  • Torque Solutions pitch-stop mount
  • Group-N transmission mounts
  • Bushings, bushings and more bushings
  • ACT HDSS Clutch
Interior
  • JPM Coachworks Leather shift boot w/ red stitching
  • DAMD D-shaped leather wheel w/ red stitching
  • JMP Coachworks leather E-brake lever boot w/ red stitching
  • TWM gunmetal weighted shift knob
  • ATI clock pod w/ STRi oil press & boost, Innovate LC1 wideband O2
Exterior
  • KS Tech black hood scoop delete/vent
  • Carbigncraft carbon fiber rear license plate surround
  • 13.5% tint front and back
 

Attachments

·
Registered
Joined
·
875 Posts
Re: 8CD's 2005 WRB STi

Damn you! Finding an 05 for that price with only 10k miles! haha. Just kidding man. Waiting sure does pay off doesn't it. Good find...you lucky dog.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #6 (Edited)
Re: 8CD's 2005 WRB STi

Update to the update. The car just rolled over 22k miles.



Engine/Power
-Beatrush gold airbox
-ID 1,000cc
-T1 top feed conversion fuel rails with line kit red/blue fittings
-Helix catless downpipe
-Grimmspeed 38mm EWG up-pipe with MVS wastegate (red)
-NGK 1-step colder plugs
-Walbro 255lph fuel pump
-tactrix 1.3

-SPT catback
-Invidia equal length race header
-Torque Solutions billet pitch stop
-Grimmspeed 3-port BCS
-Turbo blanket
-GMS turbo inlet
-GSM AOS


Interior
-ATI gauge pod
-Asus netbook for tuning and data-logging. I'm going to mount this in the glove compartment with springloaded drawer sliders and paint it WRB :D
-STRi 60mm SLM II boost and oil pressure
- Innovate 52mm AFR gauge

-AVIC u310bt head unit/navi

Exterior
-v-limited style poly front lip
-Carbing craft rear license plate surround
-13.5% tint front all around (minus windshield)



Brakes/Wheels/Suspension

-Work CR Kai 18x8.5 Matte Gunmetal w/ blue lugs

 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #7 (Edited)
Re: 8CD's 2005 WRB STi

UPDATE:

Ordered my 18x8.5 +43 Work CR Kai in Matte Gunmetal. They're supposed to be here before the end of May, so I will be installing all the engine goodies the first week of June then getting it tuned.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #8
Re: 8CD's 2005 WRB STi

Car is up and running, e85 tune is on wednesday. Will take pics and videos. It sounds fantastic.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #9 (Edited)
Re: 8CD's 2005 WRB STi

Got my E85 tune from Harvey at The Boost Creep today. The car feels so much better and I couldn't be happier. Final numbers were 295AWHP/333AWTQ. Harvey's Dyno Dynamics runs some pretty low numbers too compared to the dynojets around here, so I'm very pleased. The EWG/equal length header combo is even better than I expected. The sound isn't done justice in the video.

2005 STi Stage 2 + equal length header + EWG + e85 - YouTube
















 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #10
Re: 8CD's 2005 WRB STi Works/E85/EWG/ELH

Put some KW v3 coilovers on yesterday. I used group n rear top hats with whiteline com c in the front. The coilovers are great, can't wait for an alignment. :tup: The evo x is my buddy's car that was getting H & R springs and spacers.











 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #12
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3





Fenders pulled and flattened with 255/35/18 Potenza RE-11s
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #14
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

A little update on what's coming together right now. I have the turbo and the adapter, just waiting on the other parts to come in.

Summer 2014 build
Garrett GT3076R 0.63 AR
TurboXS fmic
sti-lin' rotated turbo adapter
custom 4" intake
speed density tune by Harvey @ Boost Creep
Built short block by ASF Machine, still deciding on pistons
Custom rotated downpipe by ASF machine w/ GESi EPA certified hi-po cat
Southbend stage 2 clutch
DW 340lph pump
Tial Q BOV

We are going to shoot for ~440awhp on E85 and make the car pass Colorado emissions testing. I am cutting the 2.5" portion out of the SPT catback for full 3" and running the EWG dump back into the downpipe circumventing the cat. The thing is going to be quiet, mean, and clean.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #15
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

Cosworth 8.2:1 99.5mm pistons. Got them for $550 from a local builder, brand new in box. I guess he had a few sets sitting around that he wanted to move and I couldn't pass up such a great deal on fantastic pistons. These things are beautiful. Will be using Manley H-Tuff for rods.





 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #16
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

So a bit has changed, the car is getting a black Perrin fmic with custom piping now. I was going to use an AMS crash bar with the TurboXS fmic, but AMS no longer makes it. I don't like the idea of having absolutely nothing there and Perrin's bar is pretty solid.

I can't say enough about how great Joe at ASF Machine has been, he even picked my car up in Denver and drove it back to Grand Junction to save me a multi-hour bus/rental ride back. The car is getting tuned on September 2nd and will hit the track (High Plains Raceway) almost immediately after, with GoPro videos of course.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #17
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

OK so we are using 99.75mm Cosworth pistons now instead, the 99.5mm were iffy for a clean hone. So, that means I will be selling my 99.5s for a steal when I get them back (with my car) so let me know if you're interested.
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #18 (Edited)
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

Add Killer B oil pan/baffle and Grimmspeed TGV Deletes + phenolic spacers to the list.

So when I pick the car up (supposed to be next week or the following) this is what will be on the car:

Engine
  • Garrett GT3076R 0.63 AR
  • Cosworth 8.2:1 99.75mm forged pistons
  • Manley H-Tuff forged rods, stock length
  • ACL H bearings
  • ARP head studs
  • Custom 4" intake
  • Perrin FMIC (Black) with custom piping
  • Tial Q BOV (red)
  • STi-lin' rotated turbo adapter
  • Grimmspeed Up-pipe with Tial MV-S (red) w/ dump routed back into downpipe
  • grimmspeed 3-port EBCS
  • Custom rotated downpipe w/ GESi UHO EPA certified catalytic converter
  • ID 1000cc injectors on T1 top feed conversion rails
  • Grimmspeed TGV deletes w/ 3mm phenolic spacers
  • Killer B oil pan, pick-up & baffle
  • Invidia EL race header
  • Moroso dual catch cans
  • DW 340lph fuel pump
  • Aeromotive adjustable fuel pressure regulator
  • SPT catback w/ 2.5" portion cut out and replaced with 3"
Suspension/wheels
  • Work CR Kai Matte Gunmetal 18x8.5 +43 w/ Bridgestone Potenza RE-11 255/35/18 blue lug nuts
  • KW V3 coilovers with Group N rear tops and Whiteline Com-C front [these are a crap, unreliable product and soon to be replaced]
Drivetrain
  • Group-N Engine mounts
  • Torque Solutions pitch-stop mount
  • Group-N transmission mounts
  • Bushings, bushings and more bushings
Interior
  • JPM Coachworks Leather shift boot w/ red stitching
  • DAMD D-shaped leather wheel w/ red stitching
  • JMP Coachworks leather E-brake lever boot w/ red stitching
  • TWM gunmetal weighted shift knob
Exterior
  • KS Tech black hood scoop delete/vent
  • Carbigncraft rear license plate surround
  • Cleared headlights
  • Black "SUBARU" trunk letter badges
 

·
Super Moderator
Joined
·
10,687 Posts
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

Picked up pictures or Banhammer is cocked and loaded! Lol
 

·
Registered
Joined
·
2,256 Posts
Discussion Starter #20
Re: 2005 WRB STi Works/E85/EWG/ELH/KW v3 30r comin'

Oh there will be pics and videos abound! There will also be emissions reports because this bitch is going to be smog legal if it kills me!
 
1 - 20 of 84 Posts
Top