IW STi Forum banner
Status
Not open for further replies.
1 - 20 of 27 Posts

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #1 · (Edited)
Hey all,

Just want to make you aware of a new bundle offered by us nuts over here at TiC.

Here's the description from our site:
cranynutsweirdoswhohavestupiddumbnamesforproductsbecausetheyliketohavefunand sincetheyrunthecompanygettodowhattheywantforproductnames said:
So here's the deal - this past spring Tony and Clint got a chance to go down to the Dragon and meet up with bunch of the SE Nasioc crew (Hi guys!!).

They had a great time, but Clint did have one problem. See, one morning, Clint, and his sister-in-law's husband went out for a drive. The morning was beautiful, the roads were pretty empty, the sun was shining, and light was filtering through the trees in a heavenly image of automotive nirvana.

As Clint rounded a corner, the burbling sound of his boxer engine filling the air with a mellow, yet aggressive rumble, he saw movement out of the corner of his eye. It was a squirrel. A skinny, hungry, cute little fluffy squirrel. He ran into the opposing traffic lane and stopped. Clint was relieved. Then wouldn't you know it - that little squirrelbrained idiot ran RIGHT IN FRONT of Clint's left tire.

Well, the braking distance was too short, so Clint, with his autocross trained reflexes looked to the right. Trees. That was no good. He looked to his left - opposing traffic lane. Big no-no for the Dragon. He had no choice, but to go forward. The squirrel, in the most nutbrained decision of his life, DID NOT MOVE, and Clint had no choice, but to hit him.

Now for those of you that don't know Clint, he's a really good looking, and super nice guy. He felt really really bad about hitting that squirrel (he still does), and wondered why that squirrel would do anything so stupid as running out right in front of his 245/45's. All Clint could figure was that the stupid thing was commiting suicide.

Well, ol' Clint felt so bad about this that he decided then and there that the next TiC suspension bundle would be named for that squirrel. Thus, TiC brings you the Suicidal Squirrel.

Made up of two great products that work great together, this bundle is designed entirely to help control your front end, stiffen things up, and allow for much sharper response. With this package you get the following:

*TiC's awesome Giuyngmyo Fender Cowl Braces
*Kartboy's radical Front Endlinks

This makes for a great combo of stuff, and while it didn't save our squirrel, perhaps it will help save one that you may one day run across.
Price is $180 shipped for free in the US.

Here's the direct link:
http://turninconcepts.com/product_info.php?products_id=134

Here's a pic:
 

·
Premium Member
Joined
·
5,267 Posts
Awesome package, will definitely look into it. BTW when I got the pivot bushings in the mail, I loved the foam plane!
 

·
Registered
Joined
·
84 Posts
:cool: I got a german fighter
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #7 ·
You know guys - if there were enough interest I would be willing to put together the Crazy Chipmunk package - fender cowl braces + rear endlinks instead of fronts.

If I can get a nod from 5 folks I'll do it.
 

·
Premium Member
Joined
·
5,267 Posts
Turninconcepts.com said:
You know guys - if there were enough interest I would be willing to put together the Crazy Chipmunk package - fender cowl braces + rear endlinks instead of fronts.

If I can get a nod from 5 folks I'll do it.
Might be interested, need to read up more on what they do :(
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #9 ·
JJ18Sniper said:
Might be interested, need to read up more on what they do :(
What?! You mean you don't know yet!!! Where have you been? Under a rock? These braces are the coolest, most awesomest, baddest, radest, mostest part under the sun.

Seriously, they'll tighten up the front end, make inputs more responsive, and help isolate deflection/bounce to the parts that are supposed to deflect/mount - namely the struts and springs.
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #10 · (Edited)
You know - as long as I've got this thread going I may as well add a few other goodies to bring everyone up to speed:

In stock:

BSF33XZ - WL 04 STi 24-26mm adj front sway - $165 shipped for free in the US.
http://turninconcepts.com/product_info.php?products_id=43


BSF36XZ
- WL 05+ STi 24-26mm adj front sway - $165 Shipped for free in the US.
http://turninconcepts.com/product_info.php?products_id=41

Still have some of the BSF36XXZ - WL 27-29mm adj front sway - $210 shipped for free in the US.
http://turninconcepts.com/product_info.php?products_id=58

I believe I have one BSF37Z - WL 22mm adj rear sway - $146 shipped for free in the US.
http://turninconcepts.com/product_info.php?products_id=40

Also got some fairly new (to us) goodies - we are now stocking the ALKs. We used to special order these for folks, but seeing as how we're getting more and more requests for them we decided to start stocking them.

KCA362 - Comfort version - $190 shipped for free in the US
http://turninconcepts.com/product_info.php?products_id=140

KCA359
- Sport version - also $190 shipped for free in the US
http://turninconcepts.com/product_info.php?products_id=135

*Due to the very infrequent demand the race version is still a special order item.
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #11 · (Edited)
Ok, you guys talked me into it. I have put together a new bundle to make the Crazy Chipmunk setup.

Available in two flavors - STi and WRX/RS (you guys will want the STi version).
Price is set at $180 and shipping in the US is free.

This bundle gets you:
- The TiC Giuyngmyo Fender Cowl Braces
- The Kartboy rear endlinks.

Here's the direct link:
http://turninconcepts.com/product_info.php?products_id=142

Pics will be up later today.
 

·
Registered
Joined
·
621 Posts
Just ordered the 27mm front, 22mm rear, and kart boy rear endlinks :) looks like I got the last rear bar if the inventory is accurate on the website, woot :tup: Can't wait for these to come in!

Nate
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #13 ·
Puckshaw said:
Just ordered the 27mm front, 22mm rear, and kart boy rear endlinks :) looks like I got the last rear bar if the inventory is accurate on the website, woot :tup: Can't wait for these to come in!

Nate
Actually, I saw you coming and when I saw what was about happen I called up the distributor and ordered more of those rear bars. They'll be back in stock in a few days. :)
 

·
Registered
Joined
·
699 Posts
Turninconcepts.com said:
Actually, our experience is that you get less NVH with the braces as it stiffens up the chassis.
The real question now is, do I want the squirrel or the chipmunk package. I'll probably be hitting you guys up for one of these soon. Thanks for the quick reply.
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #17 ·
4banger said:
The real question now is, do I want the squirrel or the chipmunk package. I'll probably be hitting you guys up for one of these soon. Thanks for the quick reply.
Pssst.... run these numbers - KB STi Endlink Combo + braces by themselves...
 

·
Registered
Joined
·
699 Posts
Turninconcepts.com said:
Pssst.... run these numbers - KB STi Endlink Combo + braces by themselves...
I definately agree that this is a great deal. It is just that there is so much stuff that I want to buy, suspension wise, that I have to whittle my wants down to something affordable.
 

·
Banned
Joined
·
7,256 Posts
Discussion Starter · #20 ·
4banger said:
I definately agree that this is a great deal. It is just that there is so much stuff that I want to buy, suspension wise, that I have to whittle my wants down to something affordable.
We completely understand. That's why we try and put together bundles that would be useful. They let you address a few things, and save you some $$ in the process. :)
 
1 - 20 of 27 Posts
Status
Not open for further replies.
Top