IW STi Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Banned
Joined
·
1,463 Posts
Discussion Starter · #1 ·
Hey Guys,

Looking to upgrade your turbocharger? :naughty:

We are having a sale on SBR Bolt On Turbochargers.

GT10:
Pump gas to around 320-330 AWHP at 18-20 PSI.

Compressor side:
• Custom Garrett Bolt On Compressor Cover
• 48 trim
• 2.08" inducer
• 3.00" exducer
• 44 lb/min compressor wheel


Exhaust side:
• Custom SBR Bolt On Turbine Housing .58 A/R
• 2.03 exducer
• 2.22 major

SBR GT10 - MSRP: $1,399.99 | Your Price: $1,199.00
Internal Gate Sold Separately!




GT11:
Expect between 300-325 AWHP and STI owners between 340-360 AWHP at 18-20 PSI. Switching to race gas and running between 24-26 PSI should yield another 20-30 AWHP on this unit.

Compressor side:
• 52 trim
• 2.17 inducer
• 3.00 exducer
• 50 lb/min compressor wheel

Exhaust side:
• 2.11 exducer
• 2.22 major

SBR GT11 - MSRP: $1,399.99 | Your Price: $1,199.00
Internal Gate Sold Separately!



GT12:
Fully spooled before 4,000 RPM’s and is simply a great turbo for a daily driver who wants to make 360-380 AWHP on pump gas at 18-20 PSI. Expect over 400 AWHP on a great tune up, all the supporting modifications, race gas, and boost pressure between 24-26 PSI.

Compressor wheel facts:
• 56 "trim" compressor wheel
• 2.24" inducer
• 3.00" exducer
• 55 lb/min compressor wheel

• Turbine wheel facts:
• 2.16" exducer
• 2.36" major

SBR GT12 - MSRP: $1,399.99 | Your Price: $1,199.00
Internal Gate Sold Separately!




GT13:
The STI fanatics have reported some success with this turbo using only the true bolt on compressor cover; however we suggest using the 3” inlet cover to get the most performance out of this particular CHRA. 2.5l guys should expect between 350-400 AWHP on pump gas at 18-20 PSI, and upwards of 430-450 AWHP with race gas and 24-26 PSI. This turbo is very capable of 30 plus PSI; do not try this at home! Dyno graphs coming soon.

Compressor side:
• 60 "trim" comp wheel
• 2.32" inducer
• 3.00" exducer

Turbine side:
• 2.16" exducer
• 2.36" major

SBR GT13 - MSRP: $1,399.99 | Your Price: $1,199.00
Internal Gate Sold Separately!




GT14:
This turbo will only fit in the 3” compressor cover, so direct easy fitment is not certain, however smiles are guaranteed once you have the fitment behind you! Expect 400-425 AWHP on pump gas between 18-20 PSI, and capable of 440-460 AWHP on race gas.

Compressor side:
• 56 "trim" compressor wheel
• 2.41" inducer
• 3.22" exducer
• 65 lb/min airflow

Turbine side:
• 2.16" exducer
• 2.36" major

SBR GT14 - MSRP: $1,399.99 | Your Price: $1,299.00
Internal Gate Sold Separately!



SBR 3" Turbo Inlet Hose




MSRP: $199.99 | Your Price: $179.99
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top