IW STi Forum banner

1 - 20 of 668 Posts

·
Registered
Joined
·
4,538 Posts
Discussion Starter #1 (Edited)
:D
Ok, Ive been thinking of moving my thread in the texas section to here for a while. Ive had my 02 bugeye since Oct of 2001. Its sat in storage during 2 Iraq tours and currently has 106k miles on it. The only old pics of it are on film, but my friend on nasioc took these after its most recent changes.

These pics are still about 5 months old at this post and there are things that are different now that are not in the pics. Sooo here we go.






 

Attachments

·
Registered
Joined
·
1,087 Posts
Re: project bobble head...bugeye!

mod list???? power numbers??any other intel?? i like it tho really nice
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #5 (Edited)
Re: project bobble head...bugeye!

Ok, heres the parts /mods list.
It weights 2894 with a full tank of 93.

Engine
Precision 5557 Billet with THV .64 housing and S cover, oil cooled/lubed
Custom coolant header tank bypass
Stock coated header
Custom uppipe with tial 38 and custom dp by Boost logic
APS dr 3.5 tbe
Cusco exhaust hangers (not in pics)
custom aeromotive rails and goodridge 910 lines
Custom 4 in inlet made by me
Custom blitz reversed i/c piping Hot side piping made at Boost logic
Custom reversed manifold by me (shaved all unused nubs)
Custom TGV's my me, shaved external mounts
grimmspeed 8mm manifold spacers
Beatrush crank pulley
MSI solid motor mounts
Odessy 15 lb
Cusco oil can converted to coolant over flow
AVO radiator
Samco coolant hoses
Samco flex hoses
Zero sports rad cap 1.3
HKS Fcon installed,tuned by Justin Nenni at Tuning Concepts
ARC oil pan
Tomei upper and lower oil baffels
Sard fpr, Thanks dlouie87
Canton/Meca 1 micron fuel filter and -6 AN lines
PE 800cc injectors, but @ 50 psi they are 920cc
Walbro 255
72mm AT power billet throttlebody with wabash TPS, custom machined adapter, Removed IACV and oem MAP
crawford o/a seperator & custom secondary aos my me.
Greddy type R bov (HKS ssqv in pics)

Suspension/drivetrain/brakes
JIC FLT A2 coils with 10k springs
Cusco rear trailing arms
Cusco rear lateral links
Cobb front sway
Cusco Ti front stb
Cusco Carbon rear stb
Cusco 1.5 front lsd
Cusco verII 4 point brace
Cobb rear sway with hard mounts
Whiteline alk race
Whiteline rear lock bolts
Whiteline outrigger bush
Whiteline f/r spherical endlinks (STi)
Whiteline roll center kit (new version)

TIC trans bushings
06 STi front lower arms with whiteline race bushings
06 STi R180 rear diff assy w/ TIC race bushings
06 STi front knuckles
06 STi rear knuckles w/ TIC race bushings
6gunn speedo rings
GruppeN trans mount
Ver6 ra gears treated
ACT street lite flywheel and clutch
04 STi front axles early female/male style
Driveshaft Shop Carbon drive shaft w/ r180 rear yoke
ARP ss 12pt ds bolts and nuts, rear diff assy bolts
removed front "U" subframe
removed rear diff lower cover
06 STi rear brembos
AP racing 4 piston CP8350 front brakes
CL R6 front pads track, days/ AP s100 pads for street-autox
Rear Hawk HPS pads Stoptech lines
ATE gold


Exterior
JDM projectors
JDM bumper beam
6.8 k HID
JDM scoop
spray painted skirts

gold foil heat shield
front bumper clips (not in pics)
Enkei NT03 +M 18x9.5 +40 et wheels
8mm front spacers
Rolled and pulled rear fender (not pulled in the pics)
Yoko S-drive 255/35 Dunlop star specs
Project Mu sbc lugs
Enkei "racing" caps
STi carbon markers
Chokettes Front lip
Replica ver 2 lip
C-west replica canards

Interior
Custom black interior (headliner, alcantra door cards, pillars)
Sparco 215 suede wheel
Splash boss hub
Beatrush type b knob (not in pics)
Garage spec bent 3 1/2 in chrome shifter extender (not in pics)
Defi hood pod
Defi boost egt and oil pressure gauges
AEM uego wired to F con
Sti shifter trim
Blitz turbo timer/voltage gauge
Defi type 2 controler
Kartboy SS
Alpine deck (would like to trade for pioneer or kenwood as its not compatible with my MP3 player)
SPARCO evo2 seat and brackets

I think thats it.
Thanks for the comments


Weight mods are removed cruise,A/C, all trunk trims, heat shields under the car and removal of unnessesarry brackets and bolts. haha:busted:


autox pics page 14. http://www.iwsti.com/forums/other-vehicles/135673-project-bobble-head-bugeye-new-pics-up-14.html
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #6
Re: project bobble head...bugeye!

Heres a couple pics of a friends car and mine before he went to MN.




[/
 

·
Registered
Joined
·
1,087 Posts
Re: project bobble head...bugeye!

srry dude i didnt realize u weren finished the thread haha mybad
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #12
Re: project bobble head...bugeye!

Yeah, right after I started posting pics on nasioc, everyone jumbed on the rotated bandwagon. But thats ok, I jumped on the big wheel wagon.
Thanks for the comments, hoping to build a motor next summer.
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #13
Re: project bobble head...bugeye!

:Dwohoo, my sard fpr -6 an lines and fittings will be here tomarrow!
 

·
Registered
Joined
·
1,706 Posts
Re: project bobble head...bugeye!

your car is very clean....

I'm glad it went to a good owner :D
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #16
Re: project bobble head...bugeye!

Thank you^^

My AN fittings can in exept the adapters so they will be here tomarrow. I built the lines I needed though and just need those parts to put it all on.

Im going to a local show this weekend though, only b/c theres a subaru class. We also have a local meet on sunday then a autox on the 26th. HIN is the 11th of oct also but I have too much going on too go anyways. The car needs a few things before the autox.
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #17
Re: project bobble head...bugeye!

How do I add the pic in the title like everyone else???
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #19
Re: project bobble head...bugeye!

well Ive got my sard fpr on but need a tune. Im also having a maf issue. The car builds boost really fast then it feels like I hit fuel cut and the cel comes on, btw it did this before the fpr. The cel code is for the maf. A new one is 75 bucks.


I also made a little cash from the sale of some new lgt rear rotors to a member. Now Im looking for a ver2 cusco brace.
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter #20
Re: project bobble head...bugeye!

Little update, I got a cusco type II front 4 point brace. I had to cut off 2 brackets off my front subframe to put it on but fits good now.
 
1 - 20 of 668 Posts
Top