IW STi Forum banner

What is an open source tuning lesson worth to you?

Open Source Tuning Video Lesson.

7810 Views 64 Replies 8 Participants Last post by  FASTuuN.com
Gauging interest...

Who would be interested in an open source tuning lesson that walks you through step by step tuning a modified 05' STI?

This lesson is taught by none other then Shawn Church who is
the #15 top import tuner in the U.S.

The 1:27 minute video is all on the Dyno.
We are even considering adding a classroom session if we get enough interest.

The reason I ask is because we have created it, but have decided to focus on the Cobb
Access Port in our Subaru specific course.

That being the case we are still getting requests for an open source training.

The last 7 minutes of the 1 hour 27 min video is not perfect.
The back-up mic is muffled but still understandable and Shawn is just wrapping up the tune at that point.

If we did this, we would discount the course for the imperfection of course.

Throw out an affordable price that would be a definite buy. We want everyone with an
open source to be able to afford this course.

If you're interested let me know . If you would like the video details I can provide
those as well.

"Mic goof on our part equals great savings on your part!"

Name your price deal!

Thanks for your feedback.

Cheers,

Jack Fredericks
FASTuuN
[email protected]
http://facebook.com/fastuunEFIsimplified
See less See more
1 - 20 of 65 Posts
We need more data... cause we're planning to launch this very soon!

So, please vote now. or tell us what you really think.

Thank you,

Joe
Just wanted to say thank you to the newest members of FASTuuN EFI Simplified.
It sure seems like the new pricing is putting the ability of tuning EFI in your hands.

Enjoy, stay tuned, we have some great deals in the near future for the
Subaru course as well.

If you haven't taken advantage of our new pricing for the FASTuuN EFI Simplified course,
go check it out here.

Thanks for looking,

Jack Fredericks
FASTuuN
[email protected]
See less See more
Throw in your vote. We want to make this course for you!
Make your vote count.

This is for real!

Thanks,

Joe
Kinda a tight race on the polling!
We sure would like to see more people put in their vote.

This course is going to be the best value you have ever seen, but you gotta vote for it.

Haha I feel like a politician.

"Vote Now!", lol

Sincerely,

Joe
One suggestion maybe, you could have different tier pricing :

1) video only
2) video with support (questions on video etc)
3) "" + tuning support/datalog review etc

Personally I might be interested in tier 2/3. Good idea guys
One suggestion maybe, you could have different tier pricing :

1) video only
2) video with support (questions on video etc)
3) "" + tuning support/datalog review etc

Personally I might be interested in tier 2/3. Good idea guys

1) Honestly, on the open source training, the price is planned to be super affordable.
2) You get support in the FASTuuN EFI Simplified course for $199.00
3) In order to get your FASTuuN Certificate we will review your before and after datalogs
and help with a study plan to pass the certification process if needed.

These are great recommendations and are always open to improving your experience
with FASTuuN.

Thank you for your input and how do you feel about my responses?

Sincerely,

Joe
See less See more
Thanks Joe,

Yes it does. Looking forward to that video. Any timeframe ?
Looks to be a week from now.
We have to set up the Website for it. So, that's what we're waiting on.

We still need interest for this. We plan on a great price but in order to do that we need volume.

I just thought of this, but maybe we need a tiered pricing group buy.

What do you think?

If you haven't voted go now. Show your interest!
update..

I was out of the country for a couple days but now well get the site set up for you guys. Hopefully
get working on it today.

For those who haven't voted, get to it.

Thanks,

Joe
Go Vote!

Hey everyone,
Here's a sneak peek... ...take a look.

SHAWN CHURCH TEACHES OPEN SOURCE TUNING FOR 05' SUBARU STI.

In this short 1 hour and 27 minute video you will learn a ton of information.
You'll be able to watch and take notes and re-watch this tuning lesson until you fully understand it.
This is important to help you while you are actually in the tuning process, You'll be able to refresh your memory if you get stuck.
Shawn teaches you how to "sneak up on the tune" making small changes and reading your logs to see your results.
Watch Shawn as he increases the boost and timing, and sometimes pulls things back, to get the optimum performance,
reliability, and longevity from this STI engine

First off this car is an 05' Subaru STI. This is a good choice to learn open source, primarily because it touches on many upgrades
we all wish we had. This gives us a chance to show you the changes necessary to calibrate your ECU properly with a slew of aftermarket parts.

Listed below are the aftermarket modifications and performance parts:

This car has a strengthened engine in order to handle the additional stress.
Performance Cam Shafts
Aftermarket MAF Sensor
Upgraded Intake System
18g Turbo
Performance Exhaust System
Factory STI intercooler
The tune is also utilizing E85 for the fuel

This is a fresh tune using ECU Flash & Rom Raider.

In the Basic Calibration Shawn covers:

Initial boost set-up
Waste gate duty set-up
Fuel injector scaling for e85
Fuel injector latency set-up
Closed loop to open loop transition
Tip-in calibration
Mass Air Flow set-up and limits
Variable Valve Timing set-up
Disabling codes
MAP Sensor calibrations
-Offset & Multiplier.
How to save and flash the ECU

Once Shawn is tuning you learn in real time:

Primary poen loop fueling A&B
Waste gate duty cycle
-Boost overshooting
-Boost dropping off
Target boost A&B
Increasing boost in increments
Igniting timing A&B
Knock control
-Advanced multiplier
-Knock corrections
Data Logging issues
Rev limiter(Fuel cut)
-Throttle cut
-Drive-by-wire
-Requested torque
Engine load range(g/rev)
-Ignition
-Fuel
VVT intake cam advance
…and more…

Sincerely,



Jack Fredericks
FASTuuN
[email protected]
See less See more
Have you guys decided on pricing and availability ? I have all my stage 2 HW in the garage and just waiting on building up my confidence with tuning. That could come in handy

Btw, I would also post this on romraider and nasioc if you haven't already done so ...
Have you guys decided on pricing and availability ? I have all my stage 2 HW in the garage and just waiting on building up my confidence with tuning. That could come in handy

Btw, I would also post this on romraider and nasioc if you haven't already done so ...

Yes Sir, we are working on it right now as a matter-of-fact!
Hey everyone,

Saturday the Sept 7th. This will be available!

Here is a teaser shot.

Attachments

See less See more
Price???

Keep the votes coming!
Well, we got through everything yesterday.

We have one more thing to sort out and hopefully we'll get it done tonight!

So I'll keep you updated.

Look for the update either tonight or tomorrow morning.
We may have it ready for you by then!

Thanks,

Joe
We had a hang up with Facebook so we're continuing to work with them today.

Stay Tuned..

Joe
05' Subaru STI Open Source Tuning Training Video

Well after great suspense, Here it is.

We looked at the polling and threw it out the window. We did better!

Due to the fact that we had a Mic error we're practically giving it away.

Here is the break down and email we sent out this morning:


Hot off the presses!!!
Subaru Opensource tuning training video.

We have been up all night to get this out to you and get our
Facebook page to work.

So if your interested in our Opensource tuning video then you have 2 choices to purchase.

You can like our Facebook page or you can buy from our website.

If you like our page you can get it for $4.99 Just click the blue link above.
https://www.facebook.com/FastuunEFISimplified/app_1386938431535262

OR

Go here if you do not have a Facebook account and get it for $6.99
http://fastuun.com/subarutuning/subaru-sti-opensource-tuning/


So if you are a Subie Lover then you should check this out.


In this short 1 hour and 27 minute video you will learn a ton
of information. You'll be able to watch and take notes and re-watch
this tuning lesson until you fully understand it.

This is important to help you while you are actually in the tuning
process, You'll be able to refresh your memory if you get stuck.

Shawn teaches you how to "sneak up on the tune" making small
changes and reading your logs to see your results.

Watch Shawn as he increases the boost and timing, and sometimes
pulls things back, to get the optimum performance,
reliability, and longevity from this STI engine

We were thinking of charging $29 for this training but there was a goof up
of the mic at the end of the video.

"Mic goof on our part equals great savings on your part!"

You're going to receive 1.5 hours of professional, step by step video training on Opensource Tuning.

So while it's still fresh in your mind go to either page to purchase.

If you like our page you can get it for $4.99 Just click the blue link above.
https://www.facebook.com/FastuunEFISimplified/app_1386938431535262

OR

Go here if you do not have a Facebook account and get it for $6.99
http://fastuun.com/subarutuning/subaru-sti-opensource-tuning/

To Your Success
FASTuuN

So, go check it out!

Jack Fredericks
FASTuuN

Send any questions to [email protected]
See less See more
1 - 20 of 65 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top