IW STi Forum banner
Status
Not open for further replies.
1 - 12 of 12 Posts

·
Vendor
Joined
·
7,299 Posts
Discussion Starter · #1 · (Edited)
Forced Performance​






All FP Greens/20G's include Porting.



FP Green W/ Standard 2.4inch inlet - 1468.95 Shipped

FP 20G W/ 3inch Inlet - 1281.50 Shipped

FP 16G Standard Size - 768.90 Shipped

Installation Hardware:

STi Oil Feed Line - 75.00
WRX Oil Feed Line - 70.00
Oil Drain Gasket - 1.00



APS​















APS STi only Equal Length Manifold W/ Up pipe - 995.00 Shipped
- APS Heat Wrap avilable - 245.00




APS WRX/STi 1 Peice Up pipe W/ Flex Joint - 225.00 Shipped




APS WRX only DR375 Top Mount Intercooler - 795.00 Shipped




APS STi only Tumbler Valve Deletes - 530.00 Shipped

APS WRX only Tumbler Deletes - 530.00 Shipped




APS Turbo Inlet Hose For WRX/STi - 275.00 Shipped




APS WRX/STi Cold Air Intake - 260.00 Shipped

APS WRX/STi "Big Maf" 70mm I.D. Cold Air Intake - 295.00 Shipped
- Requires additional tuning.

APS WRX/STi Short Ram Intake - 135.00 Plus Shipping



APS Top Mount Intercooler Blow Off Valves - 245.00 Shipped



APS Race Fuel System W/ Aux. Injectors - 595.00 Shipped


Please contact us if you need something and you dont see it above. and please dont hesitate to ask any questions.
Thanks
Rick
801.619.1779
[email protected]
AIM: RickatRSD
 

·
Registered
Joined
·
1,884 Posts
I sent a pm and email.
Is the 3" green still in stock?
 

·
Vendor
Joined
·
7,299 Posts
Discussion Starter · #4 ·
Teh 3inch Green is curently out of stock, we just sold our last one. We should be able to get some more in here in a week or two.
Please let me know if you have any other questions
Thanks
Rick

Also Let me know if you do not hear back from one of us here as I did not get any emails from you in my Box, but im sure someone here did.
 

·
Registered
Joined
·
1,884 Posts
You guys replied, thanks :) I'll PM on some other parts too...great prices and the stuff gets here quick!
 

·
Registered
Joined
·
939 Posts
Which front mount intercooler would work best with the fp green? And also 2 questions:
1) will this turbo work with the helix catted DP?
2)What do I need besides the oil lines and FMIC to get this turbo running?
 

·
Vendor
Joined
·
7,299 Posts
Discussion Starter · #7 ·
blk04sti said:
Which front mount intercooler would work best with the fp green? And also 2 questions:
1) will this turbo work with the helix catted DP?
2)What do I need besides the oil lines and FMIC to get this turbo running?


1) Yes, the turbo will bolt up just like stock, with all the stock flanges.

2) You will need a Fuel pump, ECU(Tuning), Fuel Injectors, Intake(due to FMIC) I would recomend a Turbo Inlet and fuel rails.

Please let me know if you have any other questions
Thanks
Rick
 

·
Registered
Joined
·
444 Posts
is there an EWG setup for the 2.4" inlet Green???
 

·
Vendor
Joined
·
7,299 Posts
Discussion Starter · #9 ·
boost3d05 - Yes, The process of making a turbo EWG capable is the same, regardless of the turbo. If you need a EWG Green, just let me know I can get you pricing,dates ect..
Thanks
Rick

801.619.1779
[email protected]
AIM: RickatRSD
 

·
Registered
Joined
·
444 Posts
that is the setup i def. would like to get...could you get a rough price for it? i might be purchasing a new turbo next year sometime....or sooner...who knows? thanks a lot
 

·
Registered
Joined
·
444 Posts
?????
 

·
Vendor
Joined
·
7,299 Posts
Discussion Starter · #12 ·
Hello,

Your price would be 1399.00 for the Turbo and an additional 75.00 if you need a stainless oil line. Shipping is free of course.

Please let me know if you have any other questions
Thanks
Rick
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top