IW STi Forum banner

Status
Not open for further replies.
1 - 20 of 28 Posts
Joined
·
467 Posts
Discussion Starter #1 (Edited)

*EDIT*: With slight modification to our design we can get this bracket to fit the 02-07 chassis. We will be modifying the design before the production batch to accomplish this so anyone with an 02-07 is welcome to pre-order and get in on this!


This is an Introductory Pre-Order Group Buy for our NEW Subaru Fire Extinguisher Mount. We were on the hunt for one of a quality one of these since we started tracking our 2011 STI years ago and no one got around to making one so we finally did.



The Group Buy Details:

This group buy will be active for two weeks. We will need to get a minimum of 10 participants on board to continue. This is a Pre-Order Group Buy so parts will start to ship within 1 week of the end of the group buy or sooner! We will keep all participants up to date on a shipping ETA. The sooner we reach 10, the sooner we will be able to ship parts so be sure to share this with everyone you know that is interested in a product like this!

To place your order simply PM us with your email address, shipping address and name. Please indicate if you would like to add a Safecraft quick release and extinguisher to your order and what color you would like.


Orders can also be placed through our website at the following link:

ASI SUBARU WRX / STI FIRE EXTINGUISHER MOUNT - PRE-ORDER | All Speed Innovations

ASI Extinguisher Mount Bracket: $89.95 Shipped!

ASI Extinguisher Mount w/ Safecraft Quick Release and Extinguisher: $424.95 Shipped!



The List:

1. Wenthold - Paid
2. OConnor - Paid
3. Kho - Invoice Sent
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

The Sales Pitch:

We have had a lot of requests for an extinguisher bracket from our Subaru track day and race car customers for quite some time now.

Well here is our solution:


The ASI Extinguisher mounting bracket is made of 1/4" thick aluminum making it strong enough for any extinguisher that will fit on it without flexing or cracking. The bracket is powder coated satin black for a clean look. Our bracket can be purchased separately and used with your extinguisher and quick release of choice. The area where the extinguisher mounts is 8" x 4".

While the bracket is available separately, it does come pre-drilled for a Safecraft quick release for use with a Safecraft Model PB Halon extinguisher available in Wrinkle Black, White, Red and Gloss Black.


The whole assembly mounts to the front two seat base bolts on the passenger side of the car, within easy reach of the driver if it is ever needed. There remains plenty of leg room for the passenger however the seat travel is limited and should be pushed back to prevent interference with the actual extinguisher. For daily driving, the actual extinguisher can be removed to provide more seat travel, but what is more important, the comfort of your passenger or preventing your car from bursting into flames?



 

·
Registered
Joined
·
863 Posts
Is it me, maybe the picture angle, but that looks mounted really high. Almost up even with the front edge of the seat.

I have been looking for a mounting solution though, as well.
 
Joined
·
467 Posts
Discussion Starter #5
Is it me, maybe the picture angle, but that looks mounted really high. Almost up even with the front edge of the seat.

I have been looking for a mounting solution though, as well.
Must be the angle, the top of the bracket is just below the lever for the seat adjustment, well below the seat pad.
 
Joined
·
467 Posts
Discussion Starter #9
*UPDATE*: With slight modification to our design we can get this bracket to fit the 02-07 chassis. We will be modifying the design before the production batch to accomplish this so anyone with an 02-07 is welcome to pre-order and get in on this!
 
Joined
·
467 Posts
Discussion Starter #10
We have had some request for more pictures of the bracket by itself. If you purchase just the bracket it will not come with the silver part, that is part of the safecraft quick release that we are offering as an add on.

The bracket is pre-drilled for the safecraft unit, but can be drilled for whatever other bottle or quick release you want to use.







 

·
Registered
Joined
·
367 Posts
Has this been tested with aftermarket seats? I'm interested but I'm running Recaro Sportster CS seats with my GVF. This model has a slightly longer adjustment bar in front.
 

·
Registered
Joined
·
1,048 Posts
I'm the only one? Such cheap insurance for something happening to the car.... Can't believe more people aren't getting in on this.
 
1 - 20 of 28 Posts
Status
Not open for further replies.
Top