IW STi Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
hi guys, i've just installed a APS bov today and while i was adjusting it i noticed that at idle the valve does not close all the way, i mean the valve is open passed its internal bypass port, just a hair from opening to atmosphere port is this normal? second i've noticed that when at idle i rev the motor to about 6000 rpm the idle seems to drop below 500 rpm when the rev comes back down .... which it never happend before.
i am alittle confused and i cant find any technical documentation on this valve and the kit did not come with one, any input on this will be great thanks........
 
1 - 2 of 2 Posts
Top