IW STi Forum banner
1 - 12 of 12 Posts

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #1 · (Edited)
UPDATE Jan 16-2011:
  • Logger definition file now available. Go here to download it. Supports logging per-gear ignition timing compensation, IAT-A and IAT-B compensations.
  • Added Ignition Dwell and Fuel Pump Dutycycle (provided by dschultz.)
  • Removed some unnecessary DTCs (provided by dschultz.)
  • Made some minor corrections.
  • Added RomRaider format definition file (provided by dschultz.)
Grab the definitions here:
http://www.romraider.com/forum/viewtopic.php?f=34&t=6562
 

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #2 ·
Re: 2011 USDM STI Sedan (AE5I910V) ECUFlash definition available

Definition updated with more tables. Now includes DTC list (thanks dschultz.) I'll try and finish the remaining tables over the next couple of days.
 

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #4 ·
Re: 2011 USDM STI Sedan (AE5I910V) ECUFlash definition available

Very cool, great work!
If you happen to come across a 2011 hatch, can you send me the ROM?

Thanks.
 

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #6 ·
Re: 2011 USDM STI Sedan (AE5I910V) ECUFlash definition available

is there any difference between the 11 and 08+
At the table level, nothing interesting except for a few minor things. The 2011 sedan has slightly larger CL Fueling Target Compensation A/B (Load) and the speed limiter is set to 165mph, versus 158mph for the '08 hatch. Other than that, ignition timing, AVCS, engine load compensation, boost, etc all appear to be the same.

Some of the ECU logic seems a bit different but I haven't spent enough time with the code to really understand the differences.
 

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #7 ·

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #8 ·
Re: 2011 USDM STI Sedan (CALID AE5I910V | ECUID 7412597007) ECUFlash Definition

Definitions have been updated again. RomRaider and extended parameter logging definitions now available.
 

· Premium Member
Joined
·
7,506 Posts
Discussion Starter · #10 ·
You would need a "stage 2" tune.
 

· Registered
Joined
·
44 Posts
Hey guys:
For the 2011 STI MAIN Open Loop Fuel Maps...
Are the Primary Open Look Fueling KCA Additive B LOW & HIGH the same as the old Primary Open Look Fueling Map A & B..?

I know the 2011 STI definitions are still Experimental and just want to make sure I'm not missing anything here.

I posted examples below.
Thanks



 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top