IW STi Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. General Subaru Discussion
    I have a 2018 STI with a Built IAG closed deck block. I am running E85 with a Hellcat pump and 1300cc injectors. I live in Tennessee and with the recent cold snap I have noticed some start troubles with the e85. I know the fuel doesn't like to vaporize below 50 degrees, but I was concerned about...
  2. General Subaru Discussion
    Hello, I am new to the Subie world and just got a 2020 STI. I recently bought an accessport and threw on the Stage 0 tune just so I can log the car, since it is new to me. I ended up getting really bad FNL readings (~ -4) and slight FBK feedback knock readings. A friend suggested that since the...
  3. 2015+ STI Discussion
    Hello everybody. Just want to post here for others to have some comparison and to humble expectations. My goal was to see how far the stock motor and turbo can go. The limiting factor in this current build is the turbo. The tune has maxed out the turbo at about 22 psi. There is no more power to...
  4. Power Bragging
    Hey guys! I have a 2005 Subaru sti. I start got it built here’s the run down Engine built Iag closed deck block 100mm cp coated pistons Saenz I beam rods King bearings Iag pick up and windage Heads Stock cams 80lb Bc springs and retainers Stock valves Ported and polished Arp head studs Fueling...
  5. General Subaru Discussion
    I have a 2006 sti. We are currently running id1050x’s on an ej207 top feed fuel lines with an aem 340Lph fuel pump... Along with it an aem afr gauge. My question is, of course with a proper tune will I need to purchase sensors in order to run straight e85? From what I think, all sensors are for...
1-5 of 5 Results
Top