Brake Ducts COMPLETE!
Got in the RooDucts from Randy (super fast shipping!) and the black silicone hose (not the uber expensive orange hose) and went to town.
A couple things to note here.
1. The inlet of the RooDucts is larger than 3". You are supposed to just put the 3" hose into the duct...
2. The "4x3" reducers I epoxied to the back of my foglights have a 3.5" ID on the "3 inch" side. For this I found a small cheap true 4x3 reducer and cut it up to fill the gap.
before they were cut to fit in the foglights:
Then I also cut in the naca duct into my undertray for my intake:
view from the foglight opening. You can see how close the duct is to where the brake duct hose will be. Its getting tight in there
Quite pleased with how all that came out