IW STi Forum banner

FS/FT ate2aqtr's 15 cbs sti IAG CD stg4extr #564 ETS Rotated Xona 9567(764WHP@41psi)

18K views 56 replies 13 participants last post by  ate2aqtr 
#1 · (Edited)
CBS STI Limited
Revised 4/24/17 with up to date setup

Opticoat Pro
Weathertech liners
Ceramic Tint 30% front/20%back



IAG stage 4 extreme short block w/14 mm HS and 625+ rb's
TPG Stage 3 Heads(Curt Brown)
BC280 Cams
GSC Beehive S&R
ETS Rotated kit XR9567 TIAL Housing .82 A/R w/ ETS band manifold
4" ETS FMIC Black anodized
IAG Race AOS
Airpump delete
TPG TGV deletes
Radium in Tank Dual Pump Hanger (twin 450's)
ID 2000'S
COBB FLEX FUEL
COMPANY 23 BCS
RADIUM RAILS w/upgraded fuel lines
TIAL Q BOV
Cobb AP Flex Fuel Tuned SD
Invidia full Titanium single non resonated

Eibach front/Rear sways and springs
Perrin 20mm spacers front/back used with stock wheels
Michelin Pilot PSS 245/40/18
Continental DWS's 245/40/18
Trofeo R's 265/40/18
Wedsport TC105's 18 x 9.5 +35


P&L Triple Disc clutch
DSS REAR AXLES
DSS Carbon Fiber Driveshaft
Stock 6 speed

Built and Tuned by TPG Tuning
Low mileage Daily/Weekend Driver
Local Track : Quaker City/Motorsports Park.....Salem Ohio
Hopeful to get it down the track a few times this year!!!
 

Attachments

See less See more
3
#3 · (Edited)
Re: ate2aqtr's cbs sti stage 2+ journal

Everything is done.....the sound from the nameless/kbhh is amazing. It made 311/344 on 19psi on mustang dyno at TPG tuning in Blairsville PA. Pic and graph on their facebook page.

That's gains of 60/100......drives like a hyper dog runs!!! I will say it is pretty loud even with the 5" muffs but it is a good intoxicating load. Youtube videos too come soon.
 
#9 · (Edited)
Re: ate2aqtr's cbs sti stage 2+ journal


working on finalizing build transformation
GTX 3076r(externally gated) Tial 44mm and dump
built motor/TPG stage 2
heads/GSC S2 cams.beehive S&R...curt brown
Crawford AOS
ETS TMIC
ACT XTSS
93/e85 tunes
Lots of Swaintech bbe/gold/tbc/ppm/PC-9
ARP/CP/Tial/crawford
Waiting for final quote from Nate....done ordered 3/2
 
#13 ·
Re: ate2aqtr's 2015 cbs sti stage GTX3076r ext gated journal

So you can just swap the 1.5 in with stage 2 mods and get 350+ awhp?? Im getting tuned on e and getting injectors and fuel pump and intake put on and was under the impression that the stock internals couldn't handle more than 380 before you should play with caution......
 
#15 ·
Re: ate2aqtr's 2015 cbs sti stage GTX3076r ext gated journal

full build(internals/heads/cams/clutch)......only concern is fueling with id1000 and dw65....I want to run E85 and may need to go to a surge tank(looking at single wally) and id1300's...car is not a DD
 
#22 ·
Re: ate2aqtr's 2015 cbs sti stock location GTX3076r Externally Gated

all stations around me have 93 at the pump and I have e85 5 minutes down the street and with that information its what the tuner recommended also......Im just a power junky trying to stop the urge of turning this into full on racecar. Just lucky its not my DD......definitely trust Nate at TPG to do the right thing...he even tried to talk me out of the build and buy a used GTR.....not many people left around like that!!!
 
#25 ·
Re: ate2aqtr's 15 cbs sti stk location GTX3076r EWG Swaintech coated

added/ordered while waiting for GSC S2 Cams ...due sometime in June

Driveshaft shop Carbon Fiber 1 piece Driveshaft
Eibach pro plus kit ....springs and sway bars
Perrin 20mm spacers all around
Michelin PSS....swapping out Continental DWS...both stock size

Anyone selling some patience out there, I could use some more....car went in March 19th.

Can't wait to start break-in
 
#26 ·
Re: ate2aqtr's 15 cbs sti stk location GTX3076r EWG Swaintech coated

GSC is making subaru billet cams currently so hoping to get the build done end June/Begin July....been a long wait!!!! Swainteched the yell out of her!!! and carbon fiber driveshaft....thats whats most different than other builds....we shall see whats up.....O still asking Cobb for flexfuel!!!!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top