Meth Injection Pictures??

Phil · 11-29-2006, 05:25 PM

These past few days ive been reading on meth systems and how people use 50/50 with water and meth.. but where does the system hook up and where do you put the tank??

can anyone post some pics of their set-ups to help me better understand this?

Thank you

BBBsti LTD · 11-29-2006, 05:41 PM

Me too?????

**evilSTi7** · 11-29-2006, 05:47 PM

some people use the water tank in the trunk that is for the intercooler sprayer, some people use the winshield wiper fluid bottle in the engine bay, and some people get a 12L spec c tank that goes in the trunk.

Chris · 11-29-2006, 05:47 PM

I have an SMC system and my Meth goes in the stock intercooler spray tank in the trunk and the nozzle is in my FMIC pipe. I'm looking for a link right now to an install kit for you.

EDIT**** Here is a link to an install guide for Elements Hydramist system it may help you

http://www.elementtuning.com/Hydrami...ationguide.htm

**Interior Flaire** · 11-29-2006, 05:51 PM

Here you go!

1 gallon tank and pump mounted in LR trunk where jack was. Once I put the panel back up, you can't even tell it is there.
The small red wires are for the float valve that is attached to a light on the dash next to my IC spray switch. It lights when I am low.

Controller in the glovebox. CoolingMist Varicool boost-referenced.

Here is the plate I made to mount the tank and pump in the trunk:

The CoolingMist Stage III kit comes with SS lines and everything you need. It is a pretty intense install. I solder all connections and ran the lines down the left door sills, into the drivers fender well, and into the engine bay by the battery. It is VERY stealth. You can't see anything in the engine bay but that will change soon when I install my FMIC.

CB

Boostpimp · 11-29-2006, 06:12 PM

That's exactly where I was thinking of putting mine. I just have no way of making that bracket for the tank....hmmmm.

BrewPubeaver · 11-29-2006, 06:27 PM

Aquamist WI 2d complete kit, with the race pump and high-speed valve
Aquamist DDS3 blue bar water injection monitoring system.

race pump is down there... this is where the hispeed vave goes

used the stock intercooler sprayer for the tank, you have to wire in the level censor, so you know when it is getting low.

hi speed valve installed

lots of wireing to go to the Utec

DDS3, it is a flow meter, lets you know how much is in the tank, on/off switch, waning light, and it has more fetures but i cant remember what they are.

http://forums.nasioc.com/forums/show....php?t=1109075

BrigadoonB · 11-29-2006, 06:31 PM

Here's mine

Phil · 11-29-2006, 08:22 PM

is there a "best" EM to use with meth injection? or am i going to get the answer, it all depends on your tuner?

BrewPubeaver · 11-30-2006, 10:07 AM

seems the UTEC or a standalone would work the BEST.

Chris05STi · 11-30-2006, 11:15 AM

Nice....Dave where did you get that gauge from....would it work on my SMC Kit?

Heres mine...SMC Meth Kit...sells for $499 on Gruppe-S...and takes about 45 mins to install....tuned by my tuner with Cobb Accessport. I am converting it with help of SMC to the 12L Spec-C tank that you can get. The Spec-C tank goes for like $198 shipped. $90 for the conversion.

The SMC Meth Kit controller:

SMC Meth Kit total package:

Main Tank for the SMC Meth Kit, with the PSi Gauge:

SMC's Windshield Washer Fluid tank replacement:

How it looks under the hood (Already painting the cap red):

SMC Meth Controller (Located in the ASH TRAY):

Muffnbluff · 12-01-2006, 04:44 PM

More...I want more pictures.

Flycaster · 12-01-2006, 05:01 PM

Quote:

Originally Posted by BrewPubeaver

seems the UTEC or a standalone would work the BEST.

Why is that? It seems to me that any EM that offers multiple maps is sufficient for injection...or am I missing something?

Chris05STi · 12-01-2006, 06:39 PM

You will....once I get the 12L Spec-C tank.

JJ18Sniper · 12-02-2006, 07:15 AM

Quote:

Originally Posted by Chris05STi

You will....once I get the 12L Spec-C tank.

It's coming back with the failsafe part now right?

11-29-2006, 05:25 PM	#1
Phil Junior STI Driver Posts: 99 Join Date: Jul 2006 Trader Rating: (0)	Meth Injection Pictures?? These past few days ive been reading on meth systems and how people use 50/50 with water and meth.. but where does the system hook up and where do you put the tank?? can anyone post some pics of their set-ups to help me better understand this? Thank you This ad is not endorsed by this member. Please register or login to hide this ad.

11-29-2006, 05:47 PM	#4
Chris Senior STI Driver Car: 06 STI...FP Green Location: Vermont Posts: 341 Join Date: Oct 2006 Trader Rating: (7)	I have an SMC system and my Meth goes in the stock intercooler spray tank in the trunk and the nozzle is in my FMIC pipe. I'm looking for a link right now to an install kit for you. EDIT**** Here is a link to an install guide for Elements Hydramist system it may help you http://www.elementtuning.com/Hydrami...ationguide.htm Last edited by Chris : 11-29-2006 at 05:52 PM.

11-29-2006, 05:51 PM	#5
Interior Flaire Authorized Vendor Car: 05 PSM Stage 4 Fav Mod: Pro-Tune Location: Big D Posts: 1,745 Join Date: Apr 2005 Trader Rating: (16)	Here you go! 1 gallon tank and pump mounted in LR trunk where jack was. Once I put the panel back up, you can't even tell it is there. The small red wires are for the float valve that is attached to a light on the dash next to my IC spray switch. It lights when I am low. Controller in the glovebox. CoolingMist Varicool boost-referenced. Here is the plate I made to mount the tank and pump in the trunk: The CoolingMist Stage III kit comes with SS lines and everything you need. It is a pretty intense install. I solder all connections and ran the lines down the left door sills, into the drivers fender well, and into the engine bay by the battery. It is VERY stealth. You can't see anything in the engine bay but that will change soon when I install my FMIC. CB Last edited by Interior Flaire : 11-29-2006 at 05:57 PM.

11-29-2006, 05:41 PM	#2
BBBsti LTD Professional STI Driver Car: 2007 STi LTD Fav Mod: Stg. 2 with Knocklite Location: Boricua en So Cal Posts: 440 Join Date: Apr 2006 Trader Rating: (0)	Me too?????

11-29-2006, 05:47 PM	#3
evilSTi7 The Hoff Fan Club, member #001 Car: 05 WRB/Gold Fav Mod: Hood Scoop Homer Location: Where ever The Hoff is! Posts: 10,323 Join Date: Jul 2004 Trader Rating: (4)	some people use the water tank in the trunk that is for the intercooler sprayer, some people use the winshield wiper fluid bottle in the engine bay, and some people get a 12L spec c tank that goes in the trunk.

11-29-2006, 06:12 PM	#6
Boostpimp Grassroots STI Racer Car: 04 WRB/G STi Fav Mod: Sz49 + Meth Location: South Carolina Posts: 538 Join Date: Jun 2004 Trader Rating: (2)	That's exactly where I was thinking of putting mine. I just have no way of making that bracket for the tank....hmmmm.

11-29-2006, 06:27 PM	#7
BrewPubeaver S204 Racer Car: 89 GT-R32 Fav Mod: no brake fade Location: Portland OR Posts: 2,585 Join Date: Aug 2005 Trader Rating: (2)	Aquamist WI 2d complete kit, with the race pump and high-speed valve Aquamist DDS3 blue bar water injection monitoring system. race pump is down there... this is where the hispeed vave goes used the stock intercooler sprayer for the tank, you have to wire in the level censor, so you know when it is getting low. hi speed valve installed lots of wireing to go to the Utec DDS3, it is a flow meter, lets you know how much is in the tank, on/off switch, waning light, and it has more fetures but i cant remember what they are. http://forums.nasioc.com/forums/show....php?t=1109075

11-29-2006, 06:31 PM	#8
BrigadoonB Professional STI Driver Car: 04 Subaru WRX STi Location: Orlando Posts: 401 Join Date: Aug 2005 Trader Rating: (0)	Here's mine

11-29-2006, 08:22 PM	#9
Phil Junior STI Driver Posts: 99 Join Date: Jul 2006 Trader Rating: (0)	is there a "best" EM to use with meth injection? or am i going to get the answer, it all depends on your tuner?

11-30-2006, 10:07 AM	#10
BrewPubeaver S204 Racer Car: 89 GT-R32 Fav Mod: no brake fade Location: Portland OR Posts: 2,585 Join Date: Aug 2005 Trader Rating: (2)	seems the UTEC or a standalone would work the BEST.

11-30-2006, 11:15 AM	#11
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,701 Join Date: Jun 2005 Trader Rating: (27)	Nice....Dave where did you get that gauge from....would it work on my SMC Kit? Heres mine...SMC Meth Kit...sells for $499 on Gruppe-S...and takes about 45 mins to install....tuned by my tuner with Cobb Accessport. I am converting it with help of SMC to the 12L Spec-C tank that you can get. The Spec-C tank goes for like $198 shipped. $90 for the conversion. The SMC Meth Kit controller: SMC Meth Kit total package: Main Tank for the SMC Meth Kit, with the PSi Gauge: SMC's Windshield Washer Fluid tank replacement: How it looks under the hood (Already painting the cap red): SMC Meth Controller (Located in the ASH TRAY):

12-01-2006, 04:44 PM	#12
Muffnbluff DOMINATOR Car: 05 STi OBP Fav Mod: Strut Clunk Location: STL Posts: 5,613 Join Date: May 2005 Trader Rating: (5)	More...I want more pictures.

12-01-2006, 06:39 PM	#14
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,701 Join Date: Jun 2005 Trader Rating: (27)	You will....once I get the 12L Spec-C tank.