How is meth nozzle installed?

***Turbineguy*** · 05-11-2006, 01:05 PM

Like the title says I'm curious how water/meth nozzles are mounted. As you can see in my sig the water/meth is in the works but I'd like to have as much info as possible.

***Turbineguy*** · 05-11-2006, 06:06 PM

Anyone? Beuler? Bump.

ride_the_pony69 · 05-11-2006, 06:29 PM

Ok, so you got a tmic I see so that is easy. You should have gotten instructions with the kit but it's like this..... Remove the tmic and get a 25/64 drill bit from sears or something and drill a hole on the flat surface on the bottom side of the the tmic right before the part that connects up to the TB where the boot covers. Once you do that, the nozzle sits right inside the tmic where you drilled the hole and take the hose and screw it in to the bottom of the tmic where the nozzle is sticking out. Make sure you use some red lock tight too. It's that simple. Any other questions just let me know.

***VSGTS14*** · 05-11-2006, 08:40 PM

what he said...i'm sure the one you buy will be around the same...nozzle goes right before the throttle body.

***Turbineguy*** · 05-12-2006, 01:02 AM

Thanks for the info. Sounds too easy.

I was originally thinking I would have to drill my throttle body or something like that.

Ultimate CC · 05-12-2006, 08:34 AM

Right before TB between 3-6 inches for best atomization...

05-11-2006, 01:05 PM	#1
*Turbineguy* Non-Reformed Meth Addict Car: '06 WRB Fav Mod: A laptop and tuning software. Location: Swampbilly Central Posts: 2,384 Join Date: Feb 2006 Trader Rating: (8)	How is meth nozzle installed? Like the title says I'm curious how water/meth nozzles are mounted. As you can see in my sig the water/meth is in the works but I'd like to have as much info as possible. This ad is not endorsed by this member. Please register or login to hide this ad.

05-12-2006, 08:34 AM	#6
Ultimate CC Amateur STI Driver Fav Mod: ALCOHOL INJECTION Location: Westchester, NY Posts: 36 Join Date: Apr 2006 Trader Rating: (0)	Right before TB between 3-6 inches for best atomization... This ad is not endorsed by this member. Please register or login to hide this ad.

05-11-2006, 06:06 PM	#2
*Turbineguy* Non-Reformed Meth Addict Car: '06 WRB Fav Mod: A laptop and tuning software. Location: Swampbilly Central Posts: 2,384 Join Date: Feb 2006 Trader Rating: (8)	Anyone? Beuler? Bump.

05-11-2006, 06:29 PM	#3
ride_the_pony69 Spec C Club Car: 04 Blue STi Location: Sierra Vista, AZ Posts: 1,417 Join Date: Jan 2005 Trader Rating: (1)	Ok, so you got a tmic I see so that is easy. You should have gotten instructions with the kit but it's like this..... Remove the tmic and get a 25/64 drill bit from sears or something and drill a hole on the flat surface on the bottom side of the the tmic right before the part that connects up to the TB where the boot covers. Once you do that, the nozzle sits right inside the tmic where you drilled the hole and take the hose and screw it in to the bottom of the tmic where the nozzle is sticking out. Make sure you use some red lock tight too. It's that simple. Any other questions just let me know.

05-11-2006, 08:40 PM	#4
*VSGTS14* Muller Chevrolet Car: 08 Chevy 2500HD Fav Mod: a new 08 STi Location: Milford, NJ Posts: 9,981 Join Date: Oct 2004 Trader Rating: (11)	what he said...i'm sure the one you buy will be around the same...nozzle goes right before the throttle body.

05-12-2006, 01:02 AM	#5
*Turbineguy* Non-Reformed Meth Addict Car: '06 WRB Fav Mod: A laptop and tuning software. Location: Swampbilly Central Posts: 2,384 Join Date: Feb 2006 Trader Rating: (8)	Thanks for the info. Sounds too easy. I was originally thinking I would have to drill my throttle body or something like that.