[Turninconcepts.com]

Dear Mr. Saint,

This post is to inform you that your Vorshlag front camber plates have arrived, and are pictured below.

We believe that you will be exceedingly pleased with them as they will provided years of uncompromised service.

Just to reiterate the Vorshlag front camber plates have the following features:

• Steel plate to resist any bending forces from your suspension.
• Steel bearing carrier
• Some of the largest spherical bearings offered on any camber plate built
• Integrated sealed bearing in the included upper spring perch (sized for 60mm ID springs) to allow for free rotation of the spring to help prevent binding
• Incredibly short stack height of about 37mm to allow for tons of bump travel
• Backset of camber slots to add approximately .75* of caster

Upon the shipment of your Vorshlag camber plates your transaction with us will be concluded. We hope that you enjoy these parts, and should we be able to assist you with anything in regards to your Subaru in the future please do not hesitate to contact us.

Sincerely,
The TiC Staff

ps. For the rest of you reading this we have a few sets now in stock, and ready to go. You can find them under any of the Impreza suspension accessories listings on our site - Helping you to enjoy your car - Turn In Concepts

[boxtwo]

If those aren't straight-out-sexy, I don't know what is!

[boxer_four]

only 60mm spring perches available?

What about the people using 65mm?

[Turninconcepts.com]

Originally Posted by boxer_four

only 60mm spring perches available?

What about the people using 65mm?

There is. I just don't have any at this time. Additionally, it also depends on what dampers you're using and what the stud size is. If the standard 12mm you're good. If 14mm then we need different bits.

[RaceComp Engineering]

Congrats Clint and Tony !!

+1 for good products and a good vendor.


Myles

[4banger]

OMG!!! Check out those huge bearings!

[snorky]

I'm pulling my whitelines and selling them for these.

[boondocksaint]

Yeah yeah yeah. What about the rear plates?

Looks good, man. Can I has tracking number? xnaughtyx

Let me know when the rears come in. I want a set.

[fullerton]

Originally Posted by boondocksaint

Yeah yeah yeah. What about the rear plates?

This!

[Majin]

wowz0rz.

[chaos311clarity]

ewwwww.

[Turninconcepts.com]

Originally Posted by boondocksaint

Yeah yeah yeah. What about the rear plates?

Looks good, man. Can I has tracking number? xnaughtyx

Let me know when the rears come in. I want a set.

they went priority mail. I'll get you the delivery confirmation number when I hop on the shipping computer.

[stretch]

No direct link to product = fail! Here it is:

Vorshlag 02-07 Impreza front camber plates Turn In Concepts

Price: $425


Did you guys end up going with the narrower bearing (to reduce stack height) or the original monster?

[boondocksaint]

Originally Posted by Turninconcepts.com

they went priority mail. I'll get you the delivery confirmation number when I hop on the shipping computer.

Same addy as before? Cool. Should be here today or tomorrow if you mailed them yesterday.

[Turninconcepts.com]

Originally Posted by stretch

No direct link to product = fail! Here it is:

Vorshlag 02-07 Impreza front camber plates Turn In Concepts

Price: $425


Did you guys end up going with the narrower bearing (to reduce stack height) or the original monster?

Yep - slightly more narrow by 5mm.

No direct link as I can't keep track of all the rules between the various forums. Some say yes on link, some say no. Whenever I put one it I seem to screw it up.