Lets see your wheel pics - Page 86

sticop · 05-02-2008, 02:07 AM

Charcoal Grey Rota Slipstream 17x8 +48
General Exclaim UHP 255/40/17

PrimeTimeSTi · 05-05-2008, 05:24 AM

Quote:

Originally Posted by sticop

Charcoal Grey Rota Torque 17x8 +48
General Exclaim UHP 255/40/17

Those are not Rota Torques. They are the Slipstream. Torques look like the Work Emotion wheels, I know, I have the Torques for my winter wheels.

2007STIBRETT · 05-06-2008, 02:58 PM

Axis Hiro 235/35/19

BriTtO · 05-06-2008, 03:12 PM

Quote:

Originally Posted by 2007STIBRETT

Axis Hiro 235/35/19

More pics please

CMoore711 · 05-07-2008, 07:14 AM

'04 PSM STi.
-Wheels spec
Ro_ja Formula 5's 18 x 9 +40 Offset. They're a 2-piece forged construction, not the ones that RAY's makes currently. This spoke design is no longer produced.
-Tires spec
BFGoodrich KDW 2's 255/35/18
-Suspension
Koni/Ground Control Coilovers
8" 350lb. Springs Front
8" 325lb. Springs Rear
GC Front Camber/Caster Plates
GC Rear Camber Plates
10mm Eibach Hubcentric wheel spacers in front
5mm Ichiba Hubcentric wheel spacers in rear
Front net offset with spacers +30
Rear net offset with spacers +35
11mm longer than stock extended wheel studs installed on all 4 corners
-Body mods
Front fender rolled a little, inner fender lip is probably at around a 45 degree angle.
Rear fender lip rolled completely flat and slightly pulled
So far I've only rubbed twice on the front passenger side, and thats with my Koni's currently set to full soft and my spring rates aren't very stiff compared to most other coilovers. I will most likely stiffen up the struts and that should correct any rubbing along with an alignment
-Camber & Height setting
Alignment pending, will update later with final specs.
Height is barely over 1 finger gap in the front and I'm forcing it to fit 1 finger in the rear.

You can find more pics in this thread here:
My '04 STi now has 18x9's on it...

sticop · 05-07-2008, 09:30 AM

Quote:

Originally Posted by PrimeTimeSTi

Those are not Rota Torques. They are the Slipstream. Torques look like the Work Emotion wheels, I know, I have the Torques for my winter wheels.

yep that was a 2am brain fart

JMSSTI · 05-07-2008, 10:37 AM

Quote:

Originally Posted by dareseven

Lightwerkz,

Your car sits and looks dang near perfect (I am not feeling the red rings on the headlights though) with those 57f's. I am in lust.

U R NOT FEELING THE RED IN THE HEAD LIGHTRS MAN??? I KNOW WE ALL HAVE DIFF OPINIONS BUT COME ON!!! THE RED IN THE HEADLIGHTS MAKES THE CAR!!

LIGHTWERKZ, TELL ME HOW U DID THIS. LOOKS AWESOME SIR

***snorky*** · 05-07-2008, 10:50 AM

Quote:

Originally Posted by JMSSTI

U R NOT FEELING THE RED IN THE HEAD LIGHTRS MAN??? I KNOW WE ALL HAVE DIFF OPINIONS BUT COME ON!!! THE RED IN THE HEADLIGHTS MAKES THE CAR!!

LIGHTWERKZ, TELL ME HOW U DID THIS. LOOKS AWESOME SIR

VtecSTI · 05-07-2008, 01:14 PM

Quote:

Originally Posted by CMoore711

'04 PSM STi.
-Wheels spec
Ro_ja Formula 5's 18 x 9 +40 Offset. They're a 2-piece forged construction, not the ones that RAY's makes currently. This spoke design is no longer produced.
-Tires spec
BFGoodrich KDW 2's 255/35/18
-Suspension
Koni/Ground Control Coilovers
8" 350lb. Springs Front
8" 325lb. Springs Rear
GC Front Camber/Caster Plates
GC Rear Camber Plates
10mm Eibach Hubcentric wheel spacers in front
5mm Ichiba Hubcentric wheel spacers in rear
Front net offset with spacers +30
Rear net offset with spacers +35
11mm longer than stock extended wheel studs installed on all 4 corners
-Body mods
Front fender rolled a little, inner fender lip is probably at around a 45 degree angle.
Rear fender lip rolled completely flat and slightly pulled
So far I've only rubbed twice on the front passenger side, and thats with my Koni's currently set to full soft and my spring rates aren't very stiff compared to most other coilovers. I will most likely stiffen up the struts and that should correct any rubbing along with an alignment
-Camber & Height setting
Alignment pending, will update later with final specs.
Height is barely over 1 finger gap in the front and I'm forcing it to fit 1 finger in the rear.

BMX_STI · 05-07-2008, 02:05 PM

Quote:

Originally Posted by WRXBOOST10

i was looking into getting these wheels, except in 17 or 18. looks great!

CMoore711 · 05-07-2008, 02:17 PM

Quote:

Originally Posted by VtecSTI

LOL I just realized your pun in that!

PuccasBad_STI · 05-08-2008, 07:44 AM

Quote:

Originally Posted by r12rex

New wheels in:

Gram Light 57maximum 18x8.5 45 offset Gunblue
Rays Center Caps
Tires Dunlop Direzza Sport z1 star spec 235/40 18
McGard Black spline drives

Tires here tomorrow...will mount and take pics over the weekend.

Kind Regards,
Ryan

plz post a pic once you get them mounted... the gunblue doesn't reallly look blue, its very nice though. They look bronze in my opinion, I like them!

moreda_5 · 05-08-2008, 11:17 AM

my turn to add
sorry for the cell phone pics
nothing new just some advan rs 18 x 8.5 +50

r12rex · 05-10-2008, 12:34 AM

Quote:

Originally Posted by PuccasBad_STI

plz post a pic once you get them mounted... the gunblue doesn't reallly look blue, its very nice though. They look bronze in my opinion, I like them!

They are mounted, I've not taken any updated pictures yet. Sorry for the delay. I suck at t3h picture taking.

Soon!

Kind Regards,
Ryan

riggy30 · 05-12-2008, 09:40 PM

Quote:

Originally Posted by Justin B

What wheels are these? They are hot!

05-02-2008, 02:07 AM	#1276
sticop Grassroots STI Racer Car: 04 WRB STI Fav Mod: 255's ftmfw Location: central NH Posts: 594 Join Date: Apr 2007 Trader Rating: (1)	Re: Lets see your wheel pics Charcoal Grey Rota Slipstream 17x8 +48 General Exclaim UHP 255/40/17 This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by sticop : 05-07-2008 at 09:29 AM.

05-06-2008, 02:58 PM	#1278
2007STIBRETT Junior STI Driver Car: 07 WRX STi Location: NEWBURY PARK, CA Posts: 86 Join Date: Aug 2007 Trader Rating: (0)	Re: Lets see your wheel pics Axis Hiro 235/35/19

05-07-2008, 07:14 AM	#1280
CMoore711 Amateur STI Driver Car: PSM '04 WRX STi Posts: 38 Join Date: Apr 2007 Trader Rating: (1)	Re: Lets see your wheel pics '04 PSM STi. -Wheels spec Ro_ja Formula 5's 18 x 9 +40 Offset. They're a 2-piece forged construction, not the ones that RAY's makes currently. This spoke design is no longer produced. -Tires spec BFGoodrich KDW 2's 255/35/18 -Suspension Koni/Ground Control Coilovers 8" 350lb. Springs Front 8" 325lb. Springs Rear GC Front Camber/Caster Plates GC Rear Camber Plates 10mm Eibach Hubcentric wheel spacers in front 5mm Ichiba Hubcentric wheel spacers in rear Front net offset with spacers +30 Rear net offset with spacers +35 11mm longer than stock extended wheel studs installed on all 4 corners -Body mods Front fender rolled a little, inner fender lip is probably at around a 45 degree angle. Rear fender lip rolled completely flat and slightly pulled So far I've only rubbed twice on the front passenger side, and thats with my Koni's currently set to full soft and my spring rates aren't very stiff compared to most other coilovers. I will most likely stiffen up the struts and that should correct any rubbing along with an alignment -Camber & Height setting Alignment pending, will update later with final specs. Height is barely over 1 finger gap in the front and I'm forcing it to fit 1 finger in the rear. You can find more pics in this thread here: My '04 STi now has 18x9's on it...

05-08-2008, 11:17 AM	#1288
moreda_5 Junior STI Driver Car: 06 STI White with Go Fav Mod: JDM Mesh Grill Location: Santa Rosa Posts: 66 Join Date: Nov 2006 Trader Rating: (1)	Re: Lets see your wheel pics my turn to add sorry for the cell phone pics nothing new just some advan rs 18 x 8.5 +50