[parkergc8]

What RPM do you start your pulls at?

Maybe your lugging the car?

Could you list any and all mechanical mods?

[jph]

Originally Posted by droideka

i threw 0244 three times on the 1.00 stg 2 catted DP map and just wandered in the other day after about a month of being away and saw the updates for 1.01. reflashed this past saturday night (05/17) and the car is stronger than ever now. throttle response is improved and the jerkiness and hesitation between 2-3K rpm is all but gone.

btw, i performed a full reflash of the 1.01 map for those keeping score.

interesting.

i'm on the original stage1 map. and never saw a CEL...
i'm near sea level though with slight elevation now and then.

i wonder if i should upgrade the map or not.

your "running stronger than ever" statement makes me curious


J.

[Giant]

Originally Posted by parkergc8

What RPM do you start your pulls at?

Maybe your lugging the car?

Could you list any and all mechanical mods?

I'm getting the codes at 5500-6200 RPM...no lugging believe me!!

ZERO mechanical mods

[Shag-e]

double post

[G-REX]

Reviving this thread. I got the same code today. I was actually not even on the gas, I was coming down an offramp with no accelleration. Check Engine, cruise, and traction control lights came on, and the [S] started blinking.

I have an Invidia catted downpipe and AP Stage 2. I do have an exhaust leak, and I know/knew it because I heard it softly a few days after the install and then louder over the following days. Figured I'd get to it this weekend without any trouble but the code popped up today. I read the code with the AP and called a buddy who looked it up in the forums. Some Legacy guys reported the same thing and it was indeed an exhaust leak for them. Same kind of thing, AP Stage 2 and downpipe.

I torqued the bolts from the turbo to the DP with the recommended 26ft-lbs but it seemed ridiculously "not tight enough." I gave the torque wrench a little extra push after 26ft-lbs but maybe that still wasn't enough. I did not use ultra copper on it because it was a new gasket but maybe I'll do that when I get to repairing this.

Just wanted to semi-confirm the exhaust leak causing the problem.

[CrashOMatic]

I flashed to the 1.01 Stage 2 from 1.00 and its the 1st time I have been happy with the 08. It now pulls like the 04 did. I was never happy with Stage 2 1.00 getting the usual codes and sluggish performance. Not one code since 1.01 Base map was flashed. Time for full exhaust.
Happy again

[nytejade]

I've been getting the Wastegate Solenoid 'A' range/performance code. Twice in 2 days. One of the times wasn't even anywhere near redline.

I don't feel comfortable leaving this map on the car if it'll cause damage. Is there potential for that?

[fungool]

Got the 244 code with v101. Shifting up and down in 4th and 5th on the highway then a WOT pull in 5th. About 90 degrees. Sea level. Had the v101 about a week and 200 miles. Stage 1 93. No other mods.

[Giant]

Hey Mr.Cobb...sounds like your new 1.01 is not all it's cracked up to be.

[solovus]

Originally Posted by nytejade

I've been getting the Wastegate Solenoid 'A' range/performance code. Twice in 2 days. One of the times wasn't even anywhere near redline.

I don't feel comfortable leaving this map on the car if it'll cause damage. Is there potential for that?

Overboost (P0244) can cause engine pwnage.

[nytejade]

Well, I'm returning the AP, because that sucks a lot.

[RoninHatch]

Have perrin 91 acn no problems if that info helps.

[Angry-cop]

Originally Posted by solovus

Overboost (P0244) can cause engine pwnage.

greaaaat.. this needs to be fixed.. we all need to keep calling cobb and get on them about this.. We all paid alot of money for the AP and its not fair to us that it may damage our engines...

[TarmacST1]

hows perrin maps doing?

[fungool]

Got the 244 code again with v101 stage 1 93. 5th gear pull at about 4k. This SUX!