[gOt_rally?]

Can someone please tell me the torque spec on the whiteline camber bolts. I lost my instructions and searched and came up with nothing.

Thanks in advance,

Paul

[BBKG79]

Originally Posted by gOt_rally?

Can someone please tell me the torque spec on the whiteline camber bolts. I lost my instructions and searched and came up with nothing.

Thanks in advance,

Paul

Reving and Old thread.

The instructions say 77ft-lbs for Whiteline Camber Bolts p/n KCA414 but the STi manual says 129ft-lbs for the front and 145ft-lbs for the rear. So which is it???????

[polyol]

I just reefed it down with the good ol guns till it was uber tite.

[BBKG79]

Originally Posted by polyol

I just reefed it down with the good ol guns till it was uber tite.

That's cool sometimes, but I'd feel safer with the correct torque spec!

[polyol]

Originally Posted by BBKG79

That's cool sometimes, but I'd feel safer with the correct torque spec!

These guns are calibrated...

[sciolist]

Originally Posted by BBKG79

Reving and Old thread.

The instructions say 77ft-lbs for Whiteline Camber Bolts p/n KCA414 but the STi manual says 129ft-lbs for the front and 145ft-lbs for the rear. So which is it???????

Those numbers are about right. The OE bolts are much stouter than aftermarket camber bolts... which suck.