Tanabe cmaber plates How are they

boostedrex05 · 02-20-2007, 03:39 PM

hey guys i need strut mounts kinda wanted camber plates that lower the front a little to even my ride hights looks out i know the RCE camber plates are good but there soo pricy i found some Tanabe camber plates for 150 new but i guess there custom in some way it rasies the front 7mm at max caster and lowers the front 2mm at max neg camber. what does everyone think? what should i do? i would rather have coil overs but dont have the money and allready have eibach prokit springs.

**T3h_Clap** · 02-20-2007, 03:58 PM

get pics of the setup for us

***BoostJunkie*** · 02-20-2007, 04:00 PM

As is true with most other parts, you get what you pay for. Many of the JDM brands use cheaper pillowballs in their camber plates, which will loosen up and make noise over time. With something like the RCE camber plates, you are paying for much higher quality pillowballs, as well as attention to detail since they are made in very small batches. That being said, I'm sure the Tanabes will get the job done.

**T3h_Clap** · 02-20-2007, 04:19 PM

Quote:

Originally Posted by BoostJunkie

I'm sure the Tanabes will get the job done.

assuming they were designed for the stock struts and not tanabe coilovers, since most tanabes use a larger diameter stud

boostedrex05 · 02-21-2007, 09:21 AM

Quote:

Originally Posted by T3h_Clap

assuming they were designed for the stock struts and not tanabe coilovers, since most tanabes use a larger diameter stud

yea i gues they were custom maybe to fit the stock struts??
well here they are

http://cgi.ebay.com/ebaymotors/ws/eB...8673147&rd=1,1

**T3h_Clap** · 02-21-2007, 09:30 AM

it's a gamble, especially with an ebay store but it's your $150 do as you wish.

don't let us convince you to spend your money more wisely.

boostedrex05 · 02-22-2007, 01:16 PM

your right so what camber plates should i buy or should i just get group n hardend mounets?

**T3h_Clap** · 02-22-2007, 01:26 PM

PDE Version 2 or RCE non lowering

the PDE Version 2 will raise the car slightly

the RCE Non lowerings are will not.

boostedrex05 · 02-23-2007, 09:59 AM

Quote:

Originally Posted by T3h_Clap

PDE Version 2 or RCE non lowering

the PDE Version 2 will raise the car slightly

the RCE Non lowerings are will not.

how about the RCE that lower it slightly? im on Eibach pro kit springs and would like the front a little lower

**T3h_Clap** · 02-23-2007, 10:03 AM

Quote:

Originally Posted by boostedrex05

how about the RCE that lower it slightly? im on Eibach pro kit springs and would like the front a little lower

so get the ones that lower it slightly.

02-20-2007, 03:39 PM	#1
boostedrex05 Spec C Club Car: Gt35R STi Fav Mod: JrTuned FTW Bro Location: Best ET 10.90 StockMotor Posts: 1,266 IWSTI Addict since: Dec 2005 Trader Rating: (1)	Tanabe cmaber plates How are they hey guys i need strut mounts kinda wanted camber plates that lower the front a little to even my ride hights looks out i know the RCE camber plates are good but there soo pricy i found some Tanabe camber plates for 150 new but i guess there custom in some way it rasies the front 7mm at max caster and lowers the front 2mm at max neg camber. what does everyone think? what should i do? i would rather have coil overs but dont have the money and allready have eibach prokit springs. This ad is not endorsed by this member. Please register or login to hide this ad.

New To Site?	Need Help?	More
REGISTER FOR FREE! IWSTI Rules/Signature Rules Create a Member Journal Bookmark IWSTI Tell your friends about IWSTI	Frequently Asked Questions Did you forget your password? Make a suggestion or report a bug Mark Forums Read Contact Us	Member Journals Forum Pictures & Photography Forum GR Series (08+) Marketplace GD Series (03/04-07) Marketplace Hot eBay Deals Forum Beyond Off Topic

02-20-2007, 03:58 PM	#2
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,507 IWSTI Addict since: Dec 2004 Trader Rating: (7)	get pics of the setup for us

02-20-2007, 04:00 PM	#3
*BoostJunkie* Sold My Soul For Mods Car: '05 CGM STi Fav Mod: Track Time Location: Bethesda, MD Posts: 6,688 IWSTI Addict since: Jun 2004 Trader Rating: (14)	As is true with most other parts, you get what you pay for. Many of the JDM brands use cheaper pillowballs in their camber plates, which will loosen up and make noise over time. With something like the RCE camber plates, you are paying for much higher quality pillowballs, as well as attention to detail since they are made in very small batches. That being said, I'm sure the Tanabes will get the job done.

02-21-2007, 09:30 AM	#6
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,507 IWSTI Addict since: Dec 2004 Trader Rating: (7)	it's a gamble, especially with an ebay store but it's your $150 do as you wish. don't let us convince you to spend your money more wisely.

02-22-2007, 01:16 PM	#7
boostedrex05 Spec C Club Car: Gt35R STi Fav Mod: JrTuned FTW Bro Location: Best ET 10.90 StockMotor Posts: 1,266 IWSTI Addict since: Dec 2005 Trader Rating: (1)	your right so what camber plates should i buy or should i just get group n hardend mounets?

02-22-2007, 01:26 PM	#8
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,507 IWSTI Addict since: Dec 2004 Trader Rating: (7)	PDE Version 2 or RCE non lowering the PDE Version 2 will raise the car slightly the RCE Non lowerings are will not.