which camber plates fit KW V3's?

STI-Man · 10-11-2006, 06:09 PM

just wondering the different brands of camber plates that fit on the front and rear KW variant 3's... I know the RCE camber plates fit, but what else do? Do cusco plates fit on the front and rear? What about tein camber plates? Thanks in adv.

vandersti · 10-11-2006, 07:28 PM

Quote:

Originally Posted by STI-Man

just wondering the different brands of camber plates that fit on the front and rear KW variant 3's... I know the RCE camber plates fit, but what else do? Do cusco plates fit on the front and rear? What about tein camber plates? Thanks in adv.

I have cusco camber plates on the front, and they work and no noise. Now for the rear you are going to have to order a linear spring with a perch. I have cusco camber plates for the rear too. They should work find. The only thing right now bugging me about my KW's. I have a weird sqeak in the rear right side, and all my bolts are tightend so it probly just one of the bump stops.

VAN

**RaceComp Engineering** · 10-11-2006, 07:35 PM

Yeah we have a kit for linear conversion. Let me know.

Myles

vandersti · 10-11-2006, 07:38 PM

Quote:

Originally Posted by RaceComp Engineering

Yeah we have a kit for linear conversion. Let me know.

Myles

Could you quote a price? I am very interested!

VAN

STI-Man · 10-12-2006, 01:11 AM

so what will i need once i get my kw's in? just front camber plates and putting the stock hat on the rears?

vandersti · 10-12-2006, 08:02 AM

Quote:

Originally Posted by STI-Man

so what will i need once i get my kw's in? just front camber plates and putting the stock hat on the rears?

Well if you want camber plates go for it, but you DO NOT need them. They are made to fit your Stock Top hats. They come with good directions, they installed pretty easy.

VAN

**GTWORX.com** · 10-12-2006, 11:05 AM

Definitely get group-n strut top mounts for the front and rear...if you decide on front camber plates, than just get the rear group-n's.

**GTWORX.com** · 10-12-2006, 11:06 AM

Quote:

Originally Posted by vandersti

Could you quote a price? I am very interested!

VAN

PM sent

STI-Man · 10-12-2006, 11:30 AM

Thanks myles, can you also pm me the price on the linear rear kit?

**GTWORX.com** · 10-12-2006, 12:14 PM

Quote:

Originally Posted by STI-Man

Thanks myles, can you also pm me the price on the linear rear kit?

PM Sent

RacerXS · 10-31-2006, 06:20 PM

Quote:

Originally Posted by vandersti

I have cusco camber plates on the front, and they work and no noise. Now for the rear you are going to have to order a linear spring with a perch. I have cusco camber plates for the rear too. They should work find. The only thing right now bugging me about my KW's. I have a weird sqeak in the rear right side, and all my bolts are tightend so it probly just one of the bump stops.

VAN

I have a squeak in the right rear side too, and its driving me CRAZY! Did you ever figure out what it was?? (please say you did)

vandersti · 10-31-2006, 06:47 PM

Quote:

Originally Posted by RacerXS

I have a squeak in the right rear side too, and its driving me CRAZY! Did you ever figure out what it was?? (please say you did)

I pm'd you, but for everyone else, If you use stock top hats; its going to be metal on metal for the top-hat to the perch. I am almost positive that is causing the noise. So for me to remedy that problem, I am going to get a hold of GTWorks and get some linear spings for the rear. I already have cusco rear camber plates. You could use some kind of rubber tape too. (tape the top hat bottom) That should make the noise go away. Like I said I am not 100% sure, but I have narrowed it down to that. I have taken the sway bar off, I even ran the stock strut on, and it went away so I know it has something to do with the KW coilover. Hope this helps.

VAN

***iTSTi*** · 11-11-2006, 07:21 PM

Quote:

Originally Posted by vandersti

I pm'd you, but for everyone else, If you use stock top hats; its going to be metal on metal for the top-hat to the perch. I am almost positive that is causing the noise. So for me to remedy that problem, I am going to get a hold of GTWorks and get some linear spings for the rear. I already have cusco rear camber plates. You could use some kind of rubber tape too. (tape the top hat bottom) That should make the noise go away. Like I said I am not 100% sure, but I have narrowed it down to that. I have taken the sway bar off, I even ran the stock strut on, and it went away so I know it has something to do with the KW coilover. Hope this helps.

VAN

Keep us posted. Subscribed.

charles · 11-12-2006, 07:00 PM

I have cusco all around. In the back, it helps greatly to get an extra sping hat from KW like the front one (puple cone piece).

**T3h_Clap** · 11-13-2006, 04:52 AM

any camber plate designed for stock struts will work. (PDE ftw!)

10-11-2006, 06:09 PM	#1
STI-Man Junior STI Driver Posts: 156 IWSTI Addict since: Oct 2004 Trader Rating: (0)	which camber plates fit KW V3's? just wondering the different brands of camber plates that fit on the front and rear KW variant 3's... I know the RCE camber plates fit, but what else do? Do cusco plates fit on the front and rear? What about tein camber plates? Thanks in adv. This ad is not endorsed by this member. Please register or login to hide this ad.

11-13-2006, 04:52 AM	#15
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,507 IWSTI Addict since: Dec 2004 Trader Rating: (7)	any camber plate designed for stock struts will work. (PDE ftw!) This ad is not endorsed by this member. Please register or login to hide this ad.

New To Site?	Need Help?	More
REGISTER FOR FREE! IWSTI Rules/Signature Rules Create a Member Journal Bookmark IWSTI Tell your friends about IWSTI	Frequently Asked Questions Did you forget your password? Make a suggestion or report a bug Mark Forums Read Contact Us	Member Journals Forum Pictures & Photography Forum GR Series (08+) Marketplace GD Series (03/04-07) Marketplace Hot eBay Deals Forum Beyond Off Topic

10-11-2006, 07:35 PM	#3
RaceComp Engineering Authorized Vendor Car: 2008 Pinarello FP5 Fav Mod: New Underwear after a 147mph slide into turn 17 at Sebring in the rain....still got 3rd.. Location: Columbia, Maryland Posts: 3,410 IWSTI Addict since: Apr 2005 Trader Rating: (10)	Yeah we have a kit for linear conversion. Let me know. Myles

10-12-2006, 01:11 AM	#5
STI-Man Junior STI Driver Posts: 156 IWSTI Addict since: Oct 2004 Trader Rating: (0)	so what will i need once i get my kw's in? just front camber plates and putting the stock hat on the rears?

10-12-2006, 11:05 AM	#7
GTWORX.com Authorized Vendor Car: 06 B-SPEC Legacy wit Fav Mod: AP Pedals and Motons Location: SEE the NEW SITE www.GTWO Posts: 1,120 IWSTI Addict since: Oct 2005 Trader Rating: (3)	Definitely get group-n strut top mounts for the front and rear...if you decide on front camber plates, than just get the rear group-n's.

10-12-2006, 11:30 AM	#9
STI-Man Junior STI Driver Posts: 156 IWSTI Addict since: Oct 2004 Trader Rating: (0)	Thanks myles, can you also pm me the price on the linear rear kit?

11-12-2006, 07:00 PM	#14
charles Junior STI Driver Car: 06 STI Location: Tampa, FL Posts: 127 IWSTI Addict since: Apr 2006 Trader Rating: (1)	I have cusco all around. In the back, it helps greatly to get an extra sping hat from KW like the front one (puple cone piece).