[LuVJuGGs]

The 6Gun issue has been FIXED for a long time now and no issue what so ever that I know of and from what was explained to me by ppl who know more than I it was thin metal or not strong enough type of metal used. And the 6Gun kit used the stock ball joint to lower the control arm pick up point but the WL unit is a complete new ball joint thats just taller.

I have excessive play in it and seems it was either a defective unit or it just couldnt handle 1 track day and some normal daily driving duties.

[LuVJuGGs]

Originally Posted by javid

What issue? All of our kits are in good working order. A few have even been in accidents and still going strong. I do know a few track folks in Canada are having trouble with WL RCAs but I am not familiar with the issue, they just let me know while ordering kits. Maybe some of these folks can / will help...
The SPDA - Forums - Competition Tech - ATTN: KCA313 Whiteline Roll Center Kit Users "WARNING"
Javid
6Gun Racing

Sorry Javid, I should have been more specific, there was some concern a very long time ago and I know that has since been taken care of by 6Gun. And there is nothing wrong with the 6Gun RCA.
Javid, I was getting asked if the WL RCA was having the same problem and I had to get into how your product is significantly different from the WL to people who dont know what a ball joint looks like from a hole in the ground and didnt want any confusion to spread as I wish I had $500 for your kit. I saw it yesterday and it is a very high quality product. Now I have 2 different ball joints bad alignment and excessive tire wear...should have saved for your kit instead.
I hope this is satisfactory to set the record straight

[javid]

No worries, just want to avoid confusion. Thanks for double posting this over here as well.