Static X Grounding Kit Order List - OVER 400 SERVED! - Page 3

***staticx313*** · 12-01-2003, 07:48 PM

I just finished two complete kits! wooo , the only problems I am having is that the 3M (brand name not size or anything) heat shrink isnt acting right and it getting a little stiffer then normal (ebay deal *sigh* - I figured since it was 3M quality I'd be ok, but its really making me mad as I bought 200ft of the stuff). If this causes a problem I will go out and buy a different brand of heat shrink and ship it to you guys to make sure you are all 100% satisfied. As that is what my main goal is. I will do whatever I can (logically) to make sure you are all 100% happy, as Im not really out to make money at this (heh if i was i'd be charging $100 like everyone else). So please email me personally if you have any problems and I will fix them. Thanks again everyone I hope you enjoy your kits!

Robert~

Also after talking to some friends and answering some emails... for htose who want am ore "stealth" approach and dont want the heavy duty power and usage of the 4ga wiring... I will be offering an 8ga kit as well. It probably will not probably give you as good of gains as the 4ga, but it should fix all the basic stuff (choppy idle mainly)... so for those who are just looking for a fix for that or something of the sort and dont want the heavy duty stuff... an 8ga kit is now available for $39 premade and $30 youmade.

***Nivek*** · 12-01-2003, 09:55 PM

Any way to use the non-eBay stuff on mine? I want the sort of quality you got yourself. I can pay the extra doh if need be.

***staticx313*** · 12-01-2003, 10:31 PM

hmmm .. this puts me in a bind. I will see what I can do.. my problem is... its 3M , one of the best companies in the world... so I dont know who to go with. *sigh* iw ill come up with something and just resell this junk. Sorry again everyone.

Robert~

I am on order for all of your stuff... For now I will go ahead and finish all the kits needed to be finished and will just put heat shrink on as it gets here. Sorry again about this fuss... man ebay really p-s me off sometimes. Thanks nivek-ca... I shouldnt have even thought of just using that junk. Hopefully it will resell. As this stuff is expensive (in 200ft rolls).

Robert~

***Nivek*** · 12-01-2003, 11:21 PM

No problem. Take your time. I can't install it until next week anyway.

***staticx313*** · 12-02-2003, 04:47 PM

I won the new heat shrink it will be shipped out tomorrow priority...

Robert~

***staticx313*** · 12-02-2003, 06:10 PM

Im going to be precutting all the kits tonight and have them ready to be crimped and wrapped and heat shrinked and that way I can get them out the same day I get the heat shrink in. Again I apologize for the delay.

Robert~

***staticx313*** · 12-02-2003, 08:14 PM

finished precutting all the kits tonight and grabbed a pic... hehe also if you like the idea of grounding kits, guess what else may be in the near not so distant future...

http://www.imprezawrxsti.com/postnuk...&p=45613#45613

Robert~

RiX · 12-03-2003, 11:03 AM

Man, what do you, Rob? How do you have access to all this gear (and time!!)??? :-O

-Rich

***staticx313*** · 12-03-2003, 02:32 PM

I work, work, work. That table was my dad's old table from when he was my age. I purchased all the supplies with the money I had (which Im trying to make back with these kits). The new heat shrink was shipped so all the kits will be finished this week I hope. As for the rest of the stuff (CNC machining) the guy who is building it has contacts out the wazooo. So ... thats how we have hte materials for that

. I cant wait to see what becomes of the machining.

Robert~

***Nivek*** · 12-03-2003, 04:32 PM

Ok, I have an ignorant question, but is their anything you can't cut from that machine?

Like, say for example, can you build sub frame bracing like the Do-luck components out of aluminum?

***staticx313*** · 12-03-2003, 07:51 PM

the machine could make the ends and then you could take em and bend them. As for the tubes in the middle, just buy them and bend them to shape, weld (which I learned how to do last weekend) to the ends and presto. Then just paint, anondize, or powdercoat or whatever/however you wanna do it and you're done. Stuff like this isnt to far out of reach

Robert~

***Nivek*** · 12-03-2003, 08:15 PM

Hmmm, any possible way that there might be StaticX313 bracing in the future? :wink:

salisburyv · 12-04-2003, 05:03 AM

Nivek-CA, wow....what is all that stuff....looks like it could withstand a nuclear blast...please can i have the info on that suspension and stiffening mod...i would like to do the same....thanks 8)

***staticx313*** · 12-04-2003, 07:33 AM

Ya bracing and suspension stuff could be here soon

, time to do some research and such

Robert~

***Nivek*** · 12-04-2003, 09:48 AM

Quote:

Originally Posted by salisburyv

Nivek-CA, wow....what is all that stuff....looks like it could withstand a nuclear blast...please can i have the info on that suspension and stiffening mod...i would like to do the same....thanks 8)

Rather than further hijacking this thread...I created a new on the topic of additional chassis stiffening:

http://www.imprezawrxsti.com/postnuk...ewtopic&t=4858

12-01-2003, 07:48 PM	#31
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	I just finished two complete kits! wooo , the only problems I am having is that the 3M (brand name not size or anything) heat shrink isnt acting right and it getting a little stiffer then normal (ebay deal sigh - I figured since it was 3M quality I'd be ok, but its really making me mad as I bought 200ft of the stuff). If this causes a problem I will go out and buy a different brand of heat shrink and ship it to you guys to make sure you are all 100% satisfied. As that is what my main goal is. I will do whatever I can (logically) to make sure you are all 100% happy, as Im not really out to make money at this (heh if i was i'd be charging $100 like everyone else). So please email me personally if you have any problems and I will fix them. Thanks again everyone I hope you enjoy your kits! Robert~ Also after talking to some friends and answering some emails... for htose who want am ore "stealth" approach and dont want the heavy duty power and usage of the 4ga wiring... I will be offering an 8ga kit as well. It probably will not probably give you as good of gains as the 4ga, but it should fix all the basic stuff (choppy idle mainly)... so for those who are just looking for a fix for that or something of the sort and dont want the heavy duty stuff... an 8ga kit is now available for $39 premade and $30 youmade. This ad is not endorsed by this member. Please register or login to hide this ad.

12-02-2003, 08:14 PM	#37
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	ImprezaWRXSTi.Com Welcomes Flat4Engineering.Com finished precutting all the kits tonight and grabbed a pic... hehe also if you like the idea of grounding kits, guess what else may be in the near not so distant future... http://www.imprezawrxsti.com/postnuk...&p=45613#45613 Robert~ Attached Thumbnails

New To Site?	Need Help?	More
REGISTER FOR FREE! IWSTI Rules/Signature Rules Create a Member Journal Bookmark IWSTI Tell your friends about IWSTI	Frequently Asked Questions Did you forget your password? Make a suggestion or report a bug Mark Forums Read Contact Us	Member Journals Forum Pictures & Photography Forum GR Series (08+) Marketplace GD Series (03/04-07) Marketplace Hot eBay Deals Forum Beyond Off Topic

12-01-2003, 09:55 PM	#32
*Nivek* www.Subie.tv is niiice Posts: 10,067 IWSTI Addict since: Aug 2003 Trader Rating: (10)	Any way to use the non-eBay stuff on mine? I want the sort of quality you got yourself. I can pay the extra doh if need be.

12-01-2003, 10:31 PM	#33
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	hmmm .. this puts me in a bind. I will see what I can do.. my problem is... its 3M , one of the best companies in the world... so I dont know who to go with. sigh iw ill come up with something and just resell this junk. Sorry again everyone. Robert~ I am on order for all of your stuff... For now I will go ahead and finish all the kits needed to be finished and will just put heat shrink on as it gets here. Sorry again about this fuss... man ebay really p-s me off sometimes. Thanks nivek-ca... I shouldnt have even thought of just using that junk. Hopefully it will resell. As this stuff is expensive (in 200ft rolls). Robert~

12-01-2003, 11:21 PM	#34
*Nivek* www.Subie.tv is niiice Posts: 10,067 IWSTI Addict since: Aug 2003 Trader Rating: (10)	No problem. Take your time. I can't install it until next week anyway.

12-02-2003, 04:47 PM	#35
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	I won the new heat shrink it will be shipped out tomorrow priority... Robert~

12-02-2003, 06:10 PM	#36
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	Im going to be precutting all the kits tonight and have them ready to be crimped and wrapped and heat shrinked and that way I can get them out the same day I get the heat shrink in. Again I apologize for the delay. Robert~

12-03-2003, 11:03 AM	#38
RiX Professional STI Driver Car: Driving Fav Mod: Driving school... GT35R :) Location: In my STi Posts: 455 IWSTI Addict since: Apr 2003 Trader Rating: (0)	Man, what do you, Rob? How do you have access to all this gear (and time!!)??? :-O -Rich

12-03-2003, 02:32 PM	#39
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	I work, work, work. That table was my dad's old table from when he was my age. I purchased all the supplies with the money I had (which Im trying to make back with these kits). The new heat shrink was shipped so all the kits will be finished this week I hope. As for the rest of the stuff (CNC machining) the guy who is building it has contacts out the wazooo. So ... thats how we have hte materials for that . I cant wait to see what becomes of the machining. Robert~

12-03-2003, 04:32 PM	#40
*Nivek* www.Subie.tv is niiice Posts: 10,067 IWSTI Addict since: Aug 2003 Trader Rating: (10)	Ok, I have an ignorant question, but is their anything you can't cut from that machine? Like, say for example, can you build sub frame bracing like the Do-luck components out of aluminum?

12-03-2003, 07:51 PM	#41
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	the machine could make the ends and then you could take em and bend them. As for the tubes in the middle, just buy them and bend them to shape, weld (which I learned how to do last weekend) to the ends and presto. Then just paint, anondize, or powdercoat or whatever/however you wanna do it and you're done. Stuff like this isnt to far out of reach Robert~

12-03-2003, 08:15 PM	#42
*Nivek* www.Subie.tv is niiice Posts: 10,067 IWSTI Addict since: Aug 2003 Trader Rating: (10)	Hmmm, any possible way that there might be StaticX313 bracing in the future? :wink:

12-04-2003, 05:03 AM	#43
salisburyv Spec C Club Car: 04 JBP STI "The Beas Fav Mod: Sold the Beast, waitin for 09 Leg STI...Bye baby!! Location: Rhode Island Posts: 1,062 IWSTI Addict since: Jul 2003 Trader Rating: (1)	Nivek-CA, wow....what is all that stuff....looks like it could withstand a nuclear blast...please can i have the info on that suspension and stiffening mod...i would like to do the same....thanks 8)

12-04-2003, 07:33 AM	#44
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,274 IWSTI Addict since: Aug 2003 Trader Rating: (2)	Ya bracing and suspension stuff could be here soon , time to do some research and such Robert~