[staticx313]

Glacier... that is a glitch in the instructions I believe... you're not supposed to use the bolt in the block, you're supposed to use the Alternator/AC bracket (i think tis the one you were talking about) either way it works, but i mean, that is why i removed the block bolt as a piece of the kit ,as it is hard and difficult to get to.

I see the problem, it says use grounding point 5 - 7 rather then 5-6-7... where as point 5 is the AC bracket and point 7 says its coming from the block bolt... it should say (should be replaced with) AC bracket rather then say from Block.

sickSTi - $55 shipped, front page - paypal: staticx313@netzero.com

Robert~

[SickSTi]

Robert,

Just sent the $55 for the kit. case your wondering who copynburn@aol.com is..

peace thanks
Chris

[staticx313]

hey chris, I will have your kit shipped tomorrow ok

Robert~

[SickSTi]

coool, thanks again man



Chris

[rallybred]

Hey Robert, I built my own grounding kit long ago, but I read through about half these pages gaining interest in your company. I hope I don't bring up something that was already covered but I believe I read you would be making carbon fibre parts soon. I would be interested in just about any parts you come up with (especially at your quality/prices) but in particular, a part I had in mind. I don't know if you did the headlight mod, but I want a carbon fibre reflector (the chrome part in mine I took out and painted black). I know one day some company will probably charge way too much for the whole assembly with a carbon fibre look or something :-? , but I probably won't buy it. Now if someone could make just the reflector in cf so I could install it in my housing....

And not charge me an arm and a leg - woohoo! I'd be all over that!

[staticx313]

my friend i have good news. Im going to be offering a "cabonizing service" on top of all my parts I am selling. To where you can ship me ANYTHING to be carbon fibered. I will give you more details soon. Im going to have my friend come back over and grab dimensions on a lot of different parts (radiator shrouds nad stuff). I wil let everyone know... just starthing this whole new company with a friend (streettouch.com) is very difficult and tedious to keep up with.

Robert~

[mbSTi]

Robert,
the silver kit came in last night. The quality of construction is top notch! You did a fine job. I'll be installing it today. Where can I find the online instructions?
Thanks,
John

[staticx313]

?!? It should be on a piece of paper with the wiring kits. I'll PM it to you.

Robert~

[PaX]

I ran into a problem installing mine, i have a different throttle body then the sti so i did it this way instead,

[staticx313]

Hmm... ya I didnt realize thata bout the WRX. I had to make a wire for my friend's and had it go on the IC bracket and from there to driver side manifold. Someone did the throttle body successfully... Sorry for the complications I hope you like the kit!

Robert~

[PaX]

heres a pic of the throttle body ,

[PaX]

thats lookign down /\

and here s were it ended up

[PaX]

I like the kit i didn't know the red was two tone with silver i would have gone with blue instead, but its great! I'm confused with the reseting ecu part besides un pluging the battery, the holding the brake and adding boost for 5 sec s i have a boost guage but i don't know were 5lbs is at on because its not labeled lol....DAM factory crap!

[staticx313]

hmm... the ecu trick is around 2-3psi... just get it on the first tick .01mpa or whatever it is... and that'd be good. It doesnt have to be perfect and Im glad you liked the kit. Sorry its not a solid red, im really trying to work on that

Robert~

[staticx313]

Well all kits are shipped out now and I have blue, silver, red, and black kits still available!! If you want a kit now is the time to buy! I'll even work deals on bulk orders.

Robert~