Static X Motorsports Crank Pulley!!

***staticx313*** · 06-01-2005, 07:41 PM

We are proud to announce the arrival of our new lightweight crank pulley for the 2000+ Impreza! It will fit both the 2004 and 2005 STI and is a phenominal piece. Weighing in a less than a lb (YES LESS then 1lb), cryotreated, and balanced to a thousandth of an inch, this unit will be one of the lightest, most balanced and durable pulleys out there! The prototype piece was used on Corey's car and has had 4000 miles on it so far with ZERO problems. The pulley still looked new with the current protection coating they use in order to keep in durable and lasting for years to come. This idea was created from receiving a horribly designed pulley that was not balanced within spec, would wear out the belts prematurely, among other fitment issues. So rest assured that this unit is one of the best pulleys created for the Subaru community (As we kept everything in mind from belt life, to balance issues, to everything). The color is a dark chrome color that will look differently in different angles of light. A very cool look that we love! All units are inspected before delivery and are tested to INDIVIDUALLY for any kind of error or flaw of any form. This will elimante any chance of a "batch being bad" as each unit is checked and if not within spec is scrapped. By removing over 4 lbs of weight (as it weighs less then a lb) your car will feel MUCH more responsive (this is mass being taken off the crank as you know). It will feel very "athletic", as if its dropped over 100lbs and is ready to go. We promise you are going to be 100% satisfied. We should have 100 units heading our way and lead time is going to be a little over 3 weeks. We're hoping for sooner, but we'll see. Definitely a unit everyone will love and can use! If you have any further questions, feel free to ask: rschwarze@staticxmotorsports.com

Wholesale opportunities are available. If your business would like to buy these pulleys we do allow drop shipping and even better discounts for stocking in bulk.

We look forward to bringing many more high quality products to the Subaru community and thank you for your support and kindness

!

Special thanks to Corey and his crew for a phenominal piece!

UPDATED FEATURE LIST
Machined from Aircraft Quality Aluminum
Thermo-Cycled (Type of Heat Treatment and Cryo Treatment)
- Stabilizes Material
- Changes the vibration frequency - Longer Lasting
Tolerances for the center hole and keyway +.001 -.000
Tolerances for the rest of the pulley +-.005
Critical Dimensions are to OEM specification (Size, Belt Pattern, etc)
Perfect Balance due to precision machined, treated aluminum
Weighs less than 1LB (Lighter then Perrin and Cobb)
Proprietary NiRAD surface treatment process
- Increases Surface Hardness and Durability - Max 65Rc
- Anti-Galling Properties
- Excellent Corrosion Resistance - No degradation 1000 hours Salt Spray Test
- Increase Compression Strength - MAX 15%
- Provides a Thermal Barrier - 80 Degree Delta
- Uniform Coverage
(Heavy duty stuff that will outlast the life of the car basically ).

MSRP $119

Pictures of our demo unit.

Thanks again everyone!!! Look for more to come! We have an intake manifold we are designing now

! It will be available for view through our solid works modeling software

. Big things are just around the corner!

Crank pulley is NOT underdriven and will not affect the charging system, engine bearings or the oil pump in a negative manner, and will not add any additional vibration or noise.

Online: http://staticxmotorsports.com/produc...23&idproduct=4

Robert~

**Ben** · 06-01-2005, 08:21 PM

Where's mine?

***staticx313*** · 06-01-2005, 09:01 PM

PMed

I cannot wait to get the full batch in. If anyone has any other suggestions on how to make it better (as its already lighter and better balanced then just about every unit out there) let us know

we're open to suggestions from anyone!

Robert~

StiMike74 · 06-02-2005, 03:30 AM

Nice piece, ordered mine!! Side note - Rob, any idea of when my blue grounding kit will be shipped out? Im also looking for a Helix catted dp and a B+B single tip cat back. Let me know if you can hook me up. I should be ready to order within a week.

***staticx313*** · 06-02-2005, 05:31 AM

Pmed you again about the grounding kit and 5 pulleys are available. They should all be gone today, but there may be one more available if people are interested. Thanks guys!

Robert~

***bah14*** · 06-02-2005, 12:29 PM

dont make me beg.

So proud of Rob and where he's taking his company. Exciting times ahead, bro.

*edit

Spoke with rob in detail about this part. I was pretty shocked to hear how much better (in my opinion) it sounds in comparison to the other pullies on the market. Once we discussed a few things, I'm confident that this thing will be all it's said to be and more. Expect a review from me once i install it.

whiplash306 · 06-02-2005, 12:53 PM

What is the weight difference and balance difference between your pulley Rob and Perrin. As you know, I've got the Perrin and have been very pleased with it thus far.....>20,000 miles since install and ZERO problems. Do you feel there would be any sort of a noticeable difference between the two pullies? I'm sure there's people out there with the Perrin who would be willing to switch if it were beneficial....even in some small sort of way! Regardless, congrats on the part....looks REAL good!

***bah14*** · 06-02-2005, 01:08 PM

I currently have the Perrin and will be getting this one instead. I haven't tested the SXM pulley, so i can only offer guesses.

For me, the fact that the SXM pulley is actually a higher quality part with a much better finish (niRad) was enough. However, the testing that the SXM pulley will go through before it ever see our cars is very impressive. "Quality Control" is boardline obessive compulsive. And let's not forget that Rob stands behind his parts 100%. Meaning, if you have an issue, Rob will help you work things out.

There more engineering that goes into a part like this than i initially thought. I'm sure that in due time, all of this will be proven over and over again.

***staticx313*** · 06-02-2005, 08:20 PM

Updated the features with this pulley, now go match those up with another company's

. It will outlast the car and multiple engines without even trying. That NiRad coating is AMAZING.

We installed the pulley and I am working on getting installed photos up now. Its ridiculous how well this helps. I know you are thinking "Well of course its awesome its your product" we have 5 more people who are going to try them out and post their own experience for you to judge on your own. We love it, its a huge difference, and its better then any other setup out there.

Check the features and compare. EDIT: By the way this is a 30 minutes install that will not mess up your tune at all. It is NOT underdriven and is a great first mod or mod you want to drop in if you get that "mod bug" we all get

. Step by Step photos will be available.

Perrin and Cobb 1.2lbs vs SXM .95lbs or something (I am told its less then a lb. I have a picture of it on a scale showing a tick under 1lb - .9lbs - , but I am going to let a professional machine scale it and give us an exact measurement). Its lighter, stronger, and will outlive any pulley out there. Why go for something else? (BTW its cheaper in price!)

Also we have both the alternator and accessory pulley being examined and made now. A full kit (that can be made 1 piece at a time or mix/match) will be available soon as well.

Robert~

crypsatir · 06-03-2005, 06:49 AM

cool, i wanna check one out

are they listed up on your site already???

i still havent ordered the grounding kit though

and my car does NOT like my stereo

**Turninconcepts.com** · 06-03-2005, 01:31 PM

Let me know when those full kits are ready as I think I may just have to pick those up.

-Clint

***bah14*** · 06-04-2005, 02:36 PM

Quote:

Originally Posted by staticx313

Also we have both the alternator and accessory pulley being examined and made now. A full kit (that can be made 1 piece at a time or mix/match) will be available soon as well.

Robert~

you got my email aboutt he 3 parts i wanted, right? If so, hold off until the entire pulley kit is ready.

Tom Sullivan · 06-05-2005, 12:07 PM

You know im interested in this and some of your other deals already statix, lets work something out, with soem vinyl to i can sport your name :-)

***Datadatum*** · 06-05-2005, 03:39 PM

Interesting!

***staticx313*** · 06-05-2005, 09:37 PM

Quote:

Originally Posted by Tom Sullivan

You know im interested in this and some of your other deals already statix, lets work something out, with soem vinyl to i can sport your name :-)

We're going in this week (if it doesn't rain all week as they are saying

) and having the entire car decked out with vinyl and what not (Company logos/stickers/etc... not FATF stuff lol

). We are also working on a logo and sticker logo for our customers. We just haven't found "the one" yet

. Thanks again and we look forward to growing this company into one of the best wholesaling/retailing and manufacturing companies out there. I realize every company may say this lol, but we are putting forth everything to make this a reality. In the last 8 months or so (when we first incorporated), we have not pulled one dime for salary as we re-invest it ALL in order to keep growing it and we make money working on other things. So we are working 110% to make sure this is the best for YOU guys and not just for profit

We have a final quote for the 100 and as soon as the rest of the 5 arrive (Monday/Tuesday), we are going to order the 100. We are pumped

BTW, turbos are done by Garrett and were going to ship either friday or today (monday), so look for the GT30R kits to finally be ready

.

Stay tuned everyone!

Robert~

06-01-2005, 07:41 PM	#1
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,279 Join Date: Aug 2003 Trader Rating: (2)	Static X Motorsports Crank Pulley!! We are proud to announce the arrival of our new lightweight crank pulley for the 2000+ Impreza! It will fit both the 2004 and 2005 STI and is a phenominal piece. Weighing in a less than a lb (YES LESS then 1lb), cryotreated, and balanced to a thousandth of an inch, this unit will be one of the lightest, most balanced and durable pulleys out there! The prototype piece was used on Corey's car and has had 4000 miles on it so far with ZERO problems. The pulley still looked new with the current protection coating they use in order to keep in durable and lasting for years to come. This idea was created from receiving a horribly designed pulley that was not balanced within spec, would wear out the belts prematurely, among other fitment issues. So rest assured that this unit is one of the best pulleys created for the Subaru community (As we kept everything in mind from belt life, to balance issues, to everything). The color is a dark chrome color that will look differently in different angles of light. A very cool look that we love! All units are inspected before delivery and are tested to INDIVIDUALLY for any kind of error or flaw of any form. This will elimante any chance of a "batch being bad" as each unit is checked and if not within spec is scrapped. By removing over 4 lbs of weight (as it weighs less then a lb) your car will feel MUCH more responsive (this is mass being taken off the crank as you know). It will feel very "athletic", as if its dropped over 100lbs and is ready to go. We promise you are going to be 100% satisfied. We should have 100 units heading our way and lead time is going to be a little over 3 weeks. We're hoping for sooner, but we'll see. Definitely a unit everyone will love and can use! If you have any further questions, feel free to ask: rschwarze@staticxmotorsports.com Wholesale opportunities are available. If your business would like to buy these pulleys we do allow drop shipping and even better discounts for stocking in bulk. We look forward to bringing many more high quality products to the Subaru community and thank you for your support and kindness ! Special thanks to Corey and his crew for a phenominal piece! UPDATED FEATURE LIST Machined from Aircraft Quality Aluminum Thermo-Cycled (Type of Heat Treatment and Cryo Treatment) - Stabilizes Material - Changes the vibration frequency - Longer Lasting Tolerances for the center hole and keyway +.001 -.000 Tolerances for the rest of the pulley +-.005 Critical Dimensions are to OEM specification (Size, Belt Pattern, etc) Perfect Balance due to precision machined, treated aluminum Weighs less than 1LB (Lighter then Perrin and Cobb) Proprietary NiRAD surface treatment process - Increases Surface Hardness and Durability - Max 65Rc - Anti-Galling Properties - Excellent Corrosion Resistance - No degradation 1000 hours Salt Spray Test - Increase Compression Strength - MAX 15% - Provides a Thermal Barrier - 80 Degree Delta - Uniform Coverage (Heavy duty stuff that will outlast the life of the car basically ). MSRP $119 Pictures of our demo unit. Thanks again everyone!!! Look for more to come! We have an intake manifold we are designing now ! It will be available for view through our solid works modeling software . Big things are just around the corner! Crank pulley is NOT underdriven and will not affect the charging system, engine bearings or the oil pump in a negative manner, and will not add any additional vibration or noise. Online: http://staticxmotorsports.com/produc...23&idproduct=4 Robert~ This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by staticx313 : 06-05-2005 at 10:04 PM.

06-02-2005, 12:29 PM	#6
*bah14* Platinum Member Car: 2008 Forester Sports Fav Mod: "Proper" Break-in Location: LERSOC.com Posts: 3,951 Join Date: Oct 2004 Trader Rating: (4)	dont make me beg. So proud of Rob and where he's taking his company. Exciting times ahead, bro. edit Spoke with rob in detail about this part. I was pretty shocked to hear how much better (in my opinion) it sounds in comparison to the other pullies on the market. Once we discussed a few things, I'm confident that this thing will be all it's said to be and more. Expect a review from me once i install it. Last edited by bah14 : 06-02-2005 at 12:40 PM. Reason: spoke with Rob*

06-02-2005, 08:20 PM	#9
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,279 Join Date: Aug 2003 Trader Rating: (2)	Updated the features with this pulley, now go match those up with another company's . It will outlast the car and multiple engines without even trying. That NiRad coating is AMAZING. We installed the pulley and I am working on getting installed photos up now. Its ridiculous how well this helps. I know you are thinking "Well of course its awesome its your product" we have 5 more people who are going to try them out and post their own experience for you to judge on your own. We love it, its a huge difference, and its better then any other setup out there. Check the features and compare. EDIT: By the way this is a 30 minutes install that will not mess up your tune at all. It is NOT underdriven and is a great first mod or mod you want to drop in if you get that "mod bug" we all get . Step by Step photos will be available. Perrin and Cobb 1.2lbs vs SXM .95lbs or something (I am told its less then a lb. I have a picture of it on a scale showing a tick under 1lb - .9lbs - , but I am going to let a professional machine scale it and give us an exact measurement). Its lighter, stronger, and will outlive any pulley out there. Why go for something else? (BTW its cheaper in price!) Also we have both the alternator and accessory pulley being examined and made now. A full kit (that can be made 1 piece at a time or mix/match) will be available soon as well. Robert~ Last edited by staticx313 : 06-02-2005 at 08:29 PM.

06-01-2005, 08:21 PM	#2
Ben Retired Admin Car: 2006 Audi S4 Fav Mod: Weight Loss Location: Los Angeles, CA Posts: 2,821 Join Date: Dec 1969 Trader Rating: (11)	Where's mine?

06-01-2005, 09:01 PM	#3
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,279 Join Date: Aug 2003 Trader Rating: (2)	PMed I cannot wait to get the full batch in. If anyone has any other suggestions on how to make it better (as its already lighter and better balanced then just about every unit out there) let us know we're open to suggestions from anyone! Robert~

06-02-2005, 03:30 AM	#4
StiMike74 STI Driver Car: 05 STi Fav Mod: 100 octane map Location: Orlando Posts: 217 Join Date: Apr 2005 Trader Rating: (0)	Nice piece, ordered mine!! Side note - Rob, any idea of when my blue grounding kit will be shipped out? Im also looking for a Helix catted dp and a B+B single tip cat back. Let me know if you can hook me up. I should be ready to order within a week.

06-02-2005, 05:31 AM	#5
*staticx313* Platinum Member Car: 05 Subaru WRX STI CG Fav Mod: 3" FP20G - 403WHP/417WTQ Location: Huntsville, AL Posts: 5,279 Join Date: Aug 2003 Trader Rating: (2)	Pmed you again about the grounding kit and 5 pulleys are available. They should all be gone today, but there may be one more available if people are interested. Thanks guys! Robert~

06-02-2005, 12:53 PM	#7
whiplash306 Spec C Club Car: '02 ZO6 & '86 GN Fav Mod: Registered Nurse, BSN Location: Central Texas Posts: 1,146 Join Date: Oct 2003 Trader Rating: (2)	What is the weight difference and balance difference between your pulley Rob and Perrin. As you know, I've got the Perrin and have been very pleased with it thus far.....>20,000 miles since install and ZERO problems. Do you feel there would be any sort of a noticeable difference between the two pullies? I'm sure there's people out there with the Perrin who would be willing to switch if it were beneficial....even in some small sort of way! Regardless, congrats on the part....looks REAL good!

06-02-2005, 01:08 PM	#8
*bah14* Platinum Member Car: 2008 Forester Sports Fav Mod: "Proper" Break-in Location: LERSOC.com Posts: 3,951 Join Date: Oct 2004 Trader Rating: (4)	I currently have the Perrin and will be getting this one instead. I haven't tested the SXM pulley, so i can only offer guesses. For me, the fact that the SXM pulley is actually a higher quality part with a much better finish (niRad) was enough. However, the testing that the SXM pulley will go through before it ever see our cars is very impressive. "Quality Control" is boardline obessive compulsive. And let's not forget that Rob stands behind his parts 100%. Meaning, if you have an issue, Rob will help you work things out. There more engineering that goes into a part like this than i initially thought. I'm sure that in due time, all of this will be proven over and over again.

06-03-2005, 06:49 AM	#10
crypsatir Professional STI Racer Car: VW R32 turbo ;) Posts: 652 Join Date: Feb 2005 Trader Rating: (0)	cool, i wanna check one out are they listed up on your site already??? i still havent ordered the grounding kit though and my car does NOT like my stereo

06-03-2005, 01:31 PM	#11
Turninconcepts.com Authorized Vendor Posts: 4,400 Join Date: Jul 2003 Trader Rating: (48)	Let me know when those full kits are ready as I think I may just have to pick those up. -Clint

06-05-2005, 12:07 PM	#13
Tom Sullivan Junior STI Driver Fav Mod: Sat Controller Location: Fort Gordon, Georgia Posts: 79 Join Date: May 2005 Trader Rating: (0)	You know im interested in this and some of your other deals already statix, lets work something out, with soem vinyl to i can sport your name :-)

06-05-2005, 03:39 PM	#14
*Datadatum* 100% More Wingless Car: 05 STi + 08 OBXT Fav Mod: baby seats Location: Jacksonville, FL Posts: 5,392 Join Date: May 2004 Trader Rating: (0)	Interesting!