PE 850 Fuel Injector Install

cosprings · 11-12-2006, 09:52 AM

Anyone with PE 850s! When you pull the wiring harness off the stock fuel injectors they don't fit the PE 850's. So, when you pull the wires out of the old harness, does it matter how you wire them into the new injectors???

NterceptR · 11-12-2006, 10:30 AM

This is the post I referenced to when installing my fuel injectors.

DIY 720cc JECS Injector Install

Good luck

hoffit · 11-12-2006, 01:45 PM

So you don't need clips. You just take out the orange piece right?

MauroMotorsports · 11-12-2006, 05:20 PM

You'll need to use the supplied clips and remove the stock clips from your existing wiring harness. The OEM clips will NOT work with the PE 850's. It's a simple swap, but take your time not to break any of the PE clips. They're a bit delicate.

cosprings · 11-12-2006, 09:25 PM

Well, I wired them the same way the stock one's were set up. That is, when looking at the injector from the side with the side feed facing you, I put red on the RIGHT connector. Let's hope it works when I get this thing put back together! Thanks NterceptR for the link reference.

11-12-2006, 09:52 AM	#1
cosprings Amateur STI Driver Car: Black 06 STi Fav Mod: Radar Detector Location: Yuma Posts: 21 Join Date: Apr 2006 Trader Rating: (0)	PE 850 Fuel Injector Install Anyone with PE 850s! When you pull the wiring harness off the stock fuel injectors they don't fit the PE 850's. So, when you pull the wires out of the old harness, does it matter how you wire them into the new injectors??? This ad is not endorsed by this member. Please register or login to hide this ad.

11-12-2006, 09:25 PM	#5
cosprings Amateur STI Driver Car: Black 06 STi Fav Mod: Radar Detector Location: Yuma Posts: 21 Join Date: Apr 2006 Trader Rating: (0)	Well, I wired them the same way the stock one's were set up. That is, when looking at the injector from the side with the side feed facing you, I put red on the RIGHT connector. Let's hope it works when I get this thing put back together! Thanks NterceptR for the link reference. This ad is not endorsed by this member. Please register or login to hide this ad.

11-12-2006, 10:30 AM	#2
NterceptR Amateur STI Driver Car: 2006 STi Location: Covington, GA Posts: 10 Join Date: Jul 2005 Trader Rating: (1)	This is the post I referenced to when installing my fuel injectors. DIY 720cc JECS Injector Install Good luck

11-12-2006, 01:45 PM	#3
hoffit Professional STI Racer Car: 04 Subaru WRX STi Fav Mod: Carlabs X-brace & RPM brace Location: MN Posts: 639 Join Date: Oct 2005 Trader Rating: (8)	So you don't need clips. You just take out the orange piece right?

11-12-2006, 05:20 PM	#4
MauroMotorsports Senior STI Driver Car: 2004 STi Fav Mod: FP Green Location: Long Island Posts: 360 Join Date: Feb 2004 Trader Rating: (0)	You'll need to use the supplied clips and remove the stock clips from your existing wiring harness. The OEM clips will NOT work with the PE 850's. It's a simple swap, but take your time not to break any of the PE clips. They're a bit delicate.