need help install m type r turbo timer on 04sti

PPERICFE · 06-13-2006, 06:51 PM

any body can help thank u

i need help

**evilSTi7** · 06-13-2006, 06:58 PM

not to be an ass, but i hope you know that a turbo timer is not needed on the stock turbo. it is water and oil cooled which means it will cool itself off after you turn the car off

PPERICFE · 06-13-2006, 07:28 PM

but i brought one today if any can help that will be great thank u

wjc04wrx · 06-14-2006, 02:03 PM

If you insist on installing it, do you know if a harness is available for such a turbo timer? Usually harnesses are available for factory turbo cars.

If not, then you will have to start looking for the correct wires and splicing what ever wires are needed into the harness. You will definately need a test light in order to find the required wires.

mikkellucci · 06-15-2006, 09:42 AM

If you need help, PM me... I F$%*ing HATE the norm response "you dont need one." Some of us do indeed have turbos that are oil cool only and in fact utilize a TT.

HWYKING · 06-15-2006, 02:06 PM

PPERICFE what type of turbo timer did you purchase? most turbo timers are simple plug & play. you can also purchase a separate tt harness for the timer. for instance i have an hks type 0 timer and bought the subaru specific harness. timer runs about $65 and harness about $15. all you have to do is disconnect the ignition line, plug harness male n female connectors onto each side of the ignition wire, then plug 3rd adapter onto the turbo timer and there should also be a ground wire (black). thats it. you can add the optional kill switch to the e-brake line if you want. i suggest you do it for safety reasons. its simple if you need any more help let me know.

PPERICFE · 06-16-2006, 06:34 AM

so is the harness all the same

HWYKING · 06-20-2006, 08:55 AM

well you have to make sure you purchase a subaru specific so that it is all plug & play, i believe part # for the hks harness is FT-3. let me know if you have any other questions.

PPERICFE · 06-20-2006, 08:32 PM

thank u anyway i got a type r moto sport turbo timer i dont know what kind of harness do i need u think the hks harness will work for all the timer thank u

**Turninconcepts.com** · 06-21-2006, 07:44 AM

You have to get the one that is specific to Subaru and your turbo timer. Check the vendor you got it from as they normally carry the harnesses. If not check fleabay.

PPERICFE · 06-23-2006, 11:38 PM

what about one of this http://cgi.ebay.com/ebaymotors/Turbo...spagenameZWD1V

BadaSTi · 06-24-2006, 01:18 AM

the hks harness will work. also if you have the factory alarm or keyless entry you have to cut the dark green with black stripe wire the is above the fuse box.here is a link for step by step instructions because i too hate when people tell you that you dont need something. http://www.swankmonkey.com/subaru/wr...mer/index.html

mikkellucci · 06-26-2006, 05:36 AM

To the guy that started this thread - if you are installing on an 04 STi this will help you out. 95% of the online 'how to'are not STi specific. For bypassing the keyless entry and security module you will need to know the proper wires to clip:

Security module behind the glove compartment - wire to be disconnected is green with black tracer (instead of gray). PIN #2

Keyless Entry module above fuse box on driver side - wire to be disconnected is green with black tracer. PIN #6

Also, the emergency brake wire is Green/Lime instead of Pink like in the MY03 wrxs.

06-13-2006, 06:51 PM	#1
PPERICFE Amateur STI Driver Car: 2004 sti Fav Mod: coliover Location: nyc Posts: 34 Join Date: Jun 2006 Trader Rating: (1)	need help install m type r turbo timer on 04sti any body can help thank u i need help This ad is not endorsed by this member. Please register or login to hide this ad.

06-26-2006, 05:36 AM	#13
mikkellucci STI Driver Location: Ohio Posts: 243 Join Date: Dec 2005 Trader Rating: (6)	To the guy that started this thread - if you are installing on an 04 STi this will help you out. 95% of the online 'how to'are not STi specific. For bypassing the keyless entry and security module you will need to know the proper wires to clip: Security module behind the glove compartment - wire to be disconnected is green with black tracer (instead of gray). PIN #2 Keyless Entry module above fuse box on driver side - wire to be disconnected is green with black tracer. PIN #6 Also, the emergency brake wire is Green/Lime instead of Pink like in the MY03 wrxs. This ad is not endorsed by this member. Please register or login to hide this ad.

06-13-2006, 06:58 PM	#2
evilSTi7 The Hoff Fan Club, member #001 Car: 05 WRB/Gold Fav Mod: Hood Scoop Homer Location: Where ever The Hoff is! Posts: 10,278 Join Date: Jul 2004 Trader Rating: (4)	not to be an ass, but i hope you know that a turbo timer is not needed on the stock turbo. it is water and oil cooled which means it will cool itself off after you turn the car off

06-13-2006, 07:28 PM	#3
PPERICFE Amateur STI Driver Car: 2004 sti Fav Mod: coliover Location: nyc Posts: 34 Join Date: Jun 2006 Trader Rating: (1)	but i brought one today if any can help that will be great thank u

06-14-2006, 02:03 PM	#4
wjc04wrx Junior STI Driver Posts: 88 Join Date: Oct 2004 Trader Rating: (0)	If you insist on installing it, do you know if a harness is available for such a turbo timer? Usually harnesses are available for factory turbo cars. If not, then you will have to start looking for the correct wires and splicing what ever wires are needed into the harness. You will definately need a test light in order to find the required wires.

06-15-2006, 09:42 AM	#5
mikkellucci STI Driver Location: Ohio Posts: 243 Join Date: Dec 2005 Trader Rating: (6)	If you need help, PM me... I F$%*ing HATE the norm response "you dont need one." Some of us do indeed have turbos that are oil cool only and in fact utilize a TT.

06-15-2006, 02:06 PM	#6
HWYKING Senior STI Driver Car: 06 SGM STI Fav Mod: CUSCO 1.5 RS lsd Location: Southern Kalifonia Posts: 391 Join Date: Nov 2005 Trader Rating: (4)	PPERICFE what type of turbo timer did you purchase? most turbo timers are simple plug & play. you can also purchase a separate tt harness for the timer. for instance i have an hks type 0 timer and bought the subaru specific harness. timer runs about $65 and harness about $15. all you have to do is disconnect the ignition line, plug harness male n female connectors onto each side of the ignition wire, then plug 3rd adapter onto the turbo timer and there should also be a ground wire (black). thats it. you can add the optional kill switch to the e-brake line if you want. i suggest you do it for safety reasons. its simple if you need any more help let me know.

06-16-2006, 06:34 AM	#7
PPERICFE Amateur STI Driver Car: 2004 sti Fav Mod: coliover Location: nyc Posts: 34 Join Date: Jun 2006 Trader Rating: (1)	so is the harness all the same

06-20-2006, 08:55 AM	#8
HWYKING Senior STI Driver Car: 06 SGM STI Fav Mod: CUSCO 1.5 RS lsd Location: Southern Kalifonia Posts: 391 Join Date: Nov 2005 Trader Rating: (4)	well you have to make sure you purchase a subaru specific so that it is all plug & play, i believe part # for the hks harness is FT-3. let me know if you have any other questions.

06-20-2006, 08:32 PM	#9
PPERICFE Amateur STI Driver Car: 2004 sti Fav Mod: coliover Location: nyc Posts: 34 Join Date: Jun 2006 Trader Rating: (1)	thank u anyway i got a type r moto sport turbo timer i dont know what kind of harness do i need u think the hks harness will work for all the timer thank u

06-21-2006, 07:44 AM	#10
Turninconcepts.com Authorized Vendor Posts: 4,822 Join Date: Jul 2003 Trader Rating: (50)	You have to get the one that is specific to Subaru and your turbo timer. Check the vendor you got it from as they normally carry the harnesses. If not check fleabay.

06-23-2006, 11:38 PM	#11
PPERICFE Amateur STI Driver Car: 2004 sti Fav Mod: coliover Location: nyc Posts: 34 Join Date: Jun 2006 Trader Rating: (1)	what about one of this http://cgi.ebay.com/ebaymotors/Turbo...spagenameZWD1V

06-24-2006, 01:18 AM	#12
BadaSTi STI Driver Car: 06 STI Fav Mod: Invidia G200 Location: Temecula Posts: 235 Join Date: May 2006 Trader Rating: (2)	the hks harness will work. also if you have the factory alarm or keyless entry you have to cut the dark green with black stripe wire the is above the fuse box.here is a link for step by step instructions because i too hate when people tell you that you dont need something. http://www.swankmonkey.com/subaru/wr...mer/index.html