2005 STi - 332whp/394wtq

Titleist71 · 01-20-2008, 05:42 PM

Numbers
Dyno: Land and Sea DYNOmite dynometer
Tuner: Dave from F1Dyno
Wheel HP:332
Wheel TQ:394
Ambient Temp: 80 degrees
Elevation: 20 ft. (approx)

Car Info
Year:2005
Engine Management:UTEC
Turbo: VF-39- Ported,Polished (hot and cold side), wastegate welded shut
Intercooler: TXS
Meth Kit: Snow Performance Boost Cooler w/ 625 nozzle
Injectors: Stock
Intake/Inlet:Perrin
Headers: Stock- Ported,Polished, Port-matched (entirely)
Uppipe:UR w/38mm Tial (open-dump)
Downpipe:Invidia
CBE:Apexi
Other Power Mods: Double heat wrapped all IC piping on the cold-side. Helps keep the temps down, not a myth. Perrin Crank Pulley, Walbro 255, ACT Unsprung 6-Puck w/HD Plate.

I have a dyno-sheet but I cannot post attachments. Check my Member Journal for pics.

My Simple 05 PSM **Latest PICS 10/15/06**Last page

Video: Some kid video taped me just driving around. I got tired off him pacing me so I just zipped-up ahead to get away. Then 2 weeks later I find this.
Subaru WRX STI tuned by F1 Dyno. I don't know any specifics about this car but it was very loud and fast. - Video

Dyno Sheet: http://www.iwsti.com/forums/attachme...achmentid=6486

damstr · 01-20-2008, 07:53 PM

Damn thats some nice torque you have there man! How much boost you runnin?

polyol · 01-20-2008, 08:21 PM

Woh...what RPM are you making that torque at?

Titleist71 · 01-21-2008, 07:05 PM

22-23 psi during the summer. 18 psi in the fall/spring.

Torque peak is at 3300 rpm. The car holds 300whp all the way across to 6750 rpm.

01-20-2008, 05:42 PM	#1
Titleist71 Professional STI Racer Car: 05 PSM STi w/ custom Fav Mod: TiaL 38mm vented free as a bird. Location: Maine Posts: 615 Join Date: Mar 2005 Trader Rating: (1)	2005 STi - 332whp/394wtq Numbers Dyno: Land and Sea DYNOmite dynometer Tuner: Dave from F1Dyno Wheel HP:332 Wheel TQ:394 Ambient Temp: 80 degrees Elevation: 20 ft. (approx) Car Info Year:2005 Engine Management:UTEC Turbo: VF-39- Ported,Polished (hot and cold side), wastegate welded shut Intercooler: TXS Meth Kit: Snow Performance Boost Cooler w/ 625 nozzle Injectors: Stock Intake/Inlet:Perrin Headers: Stock- Ported,Polished, Port-matched (entirely) Uppipe:UR w/38mm Tial (open-dump) Downpipe:Invidia CBE:Apexi Other Power Mods: Double heat wrapped all IC piping on the cold-side. Helps keep the temps down, not a myth. Perrin Crank Pulley, Walbro 255, ACT Unsprung 6-Puck w/HD Plate. I have a dyno-sheet but I cannot post attachments. Check my Member Journal for pics. My Simple 05 PSM Latest PICS 10/15/06Last page Video: Some kid video taped me just driving around. I got tired off him pacing me so I just zipped-up ahead to get away. Then 2 weeks later I find this. Subaru WRX STI tuned by F1 Dyno. I don't know any specifics about this car but it was very loud and fast. - Video Dyno Sheet: http://www.iwsti.com/forums/attachme...achmentid=6486 This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by Titleist71 : 02-01-2008 at 07:41 AM.

01-20-2008, 07:53 PM	#2
damstr Grassroots STI Racer Car: 06 Mitsubishi Evo IX Location: Bel Air, Maryland Posts: 510 Join Date: Jan 2006 Trader Rating: (0)	Re: 2005 STi- 332whp / 394WTQ Damn thats some nice torque you have there man! How much boost you runnin?

01-20-2008, 08:21 PM	#3
polyol Spec C Club Car: 04 STi Fav Mod: Motor Mounts Location: Eugene Posts: 2,241 Join Date: Oct 2004 Trader Rating: (0)	Re: 2005 STi- 332whp / 394WTQ Woh...what RPM are you making that torque at?

01-21-2008, 07:05 PM	#4
Titleist71 Professional STI Racer Car: 05 PSM STi w/ custom Fav Mod: TiaL 38mm vented free as a bird. Location: Maine Posts: 615 Join Date: Mar 2005 Trader Rating: (1)	Re: 2005 STi- 332whp / 394WTQ 22-23 psi during the summer. 18 psi in the fall/spring. Torque peak is at 3300 rpm. The car holds 300whp all the way across to 6750 rpm. This ad is not endorsed by this member. Please register or login to hide this ad.