2007 STI - 624whp/528wtq - Page 7

MODDED 06 STI · 05-22-2008, 10:34 AM

TAPOUT,

Looks GREAT!

Have you updated with a larger exhaust yet? Automaster is fabbing up a true 4 inch turbo back for my car. I would bet you can pick-up a TON of power and flatten out your HP curve in the upper rev's! Boost should be more linear as well!

Mike

Quote:

Originally Posted by TAPOUT

This weekend I finally had some time to take some updates pictures and to loom all the wiring and W/I lines. I think it turned out really clean. The only thing that still bothers me is the line from the air to oil separator going over the turbo blanket.

All the pictures you could ask for...
#67 430HP 93 Pump 516HP C16: 2007 Subaru STI Limited Edition #67/800 GT35R Thanks to Andrewtech and Turbo XS - Springfield, Virginia

TAPOUT · 05-23-2008, 03:01 PM

Quote:

Originally Posted by MODDED 06 STI

TAPOUT,

Looks GREAT!

Have you updated with a larger exhaust yet? Automaster is fabbing up a true 4 inch turbo back for my car. I would bet you can pick-up a TON of power and flatten out your HP curve in the upper rev's! Boost should be more linear as well!

Mike

The big problem I was having with holding boost is that we originally tuned on the .9bar wastegate spring. I am now running a 1.4 bar spring set up and I no longer taper at all. I am getting ready to do cams and my Meth kit is also done now. I hope to get the cams in next week, and get back on the dyno to see where we are at.

TAPOUT · 05-28-2008, 04:10 PM

Cams are going in on the 3rd and 4th of June, Putting it on the dyno on the 10th. We will be doing MAP's for 93 pump, pump + 75/25 meth, and VP C16 race gas.

I can't say thank you enough to the guys at Andrewtech and Turbo XS for all of their help.

TAPOUT · 06-03-2008, 05:49 PM

Kelford 272 cams require machining the head. 264's are on their way to the rescue. Car should be running tomorrow.

STI-LOS · 06-03-2008, 06:45 PM

Thats gonna be kick ass bro.. LMK how you make out.. Good luck

TAPOUT · 06-04-2008, 06:45 PM

Due to weather and power outage ,we'll have to try again tomorrow.

TAPOUT · 06-06-2008, 06:24 AM

Cams are in, car runs. I'm picking it up in an hour. Jermaine from Turbo Xs is going to give it a quick road tune, and we will have it on the dyno Tuesday next week.

TAPOUT · 06-06-2008, 02:37 PM

Jermaine twisted his ankle, and Dan gave me a road tune to get me through the weekend. We are running pig rich at ~10:1 A/F until the tune on Tuesday. We had to bring 20% more fuel to get us up to where the cams were not leaning out up top. Idle is great, barely noticeable until you feel the difference in power above 5K. I can't wait to tune. I might have to send Jermaine a get well soon card...

STI-LOS · 06-06-2008, 03:24 PM

Quote:

Originally Posted by TAPOUT

Jermaine twisted his ankle, and Dan gave me a road tune to get me through the weekend. We are running pig rich at ~10:1 A/F until the tune on Tuesday. We had to bring 20% more fuel to get us up to where the cams were not leaning out up top. Idle is great, barely noticeable until you feel the difference in power above 5K. I can't wait to tune. I might have to send Jermaine a get well soon card...

NICE....Its gonna be sick dude, cant wait to see the final numbers.. Hows the car sound at idle?

mllrsti · 06-06-2008, 05:40 PM

Congrats to the OP. I hear you on adding more fuel up top, I had the same issue. STI-LOS, I can almost guarantee his car at idle with those cams sounds very similiar a to stock cammed STI with similar bolt ons, unless he disabled AVCS of course. Once he lets it rip though......HOLD ON.

TAPOUT · 06-06-2008, 10:40 PM

Quote:

Originally Posted by mllrsti

Congrats to the OP. I hear you on adding more fuel up top, I had the same issue. STI-LOS, I can almost guarantee his car at idle with those cams sounds very similiar a to stock cammed STI with similar bolt ons, unless he disabled AVCS of course. Once he lets it rip though......HOLD ON.

Bingo. Quiet at idle, monster on the highway. I'll be using the vidcam during and after the tuning session.

Lebanese rally Champion · 06-07-2008, 01:26 AM

good luck with your tune

cant wait for some great numbers...

Md05STI · 06-09-2008, 07:04 PM

Quote:

Originally Posted by TAPOUT

Kelford 272 cams require machining the head. 264's are on their way to the rescue. Car should be running tomorrow.

What did they say needs machined in the head? I have Kelford 274's and I never had anything machined in my head.

Those things should really bring your car to life on the top end...

TAPOUT · 06-10-2008, 08:58 AM

Quote:

Originally Posted by Md05STI

What did they say needs machined in the head? I have Kelford 274's and I never had anything machined in my head.

Those things should really bring your car to life on the top end...

According to Kelford's website,
Buy Performance Subaru Camshafts Online - Performance Subaru Camshafts made to precise Subaru Specifications. CamshaftShop.com If you are running 274's, they are not AVCS cams like mine are. The ones that did not clear were 11.3 lift, which is higher than either of our sets.

Md05STI · 06-10-2008, 02:41 PM

Quote:

Originally Posted by TAPOUT

According to Kelford's website,
Buy Performance Subaru Camshafts Online - Performance Subaru Camshafts made to precise Subaru Specifications. CamshaftShop.com If you are running 274's, they are not AVCS cams like mine are. The ones that did not clear were 11.3 lift, which is higher than either of our sets.

Now you have me wondering If I miss understood Phil or If I have some kind of custom grind cause he told me that my AVCS was still hooked up. Might have to give him a call and check on this....

05-28-2008, 04:10 PM	#93
TAPOUT Professional STI Driver Car: 07 STI LTD #67 Fav Mod: Andrewtech built, Turbo XS tuned GT35R 624 AWHP. 528 AWTQ on VP C16 Location: Springfield, VA Posts: 464 Join Date: Oct 2006 Trader Rating: (1)	Re: 2007 STI - 513whp/437wtq Cams are going in on the 3rd and 4th of June, Putting it on the dyno on the 10th. We will be doing MAP's for 93 pump, pump + 75/25 meth, and VP C16 race gas. I can't say thank you enough to the guys at Andrewtech and Turbo XS for all of their help.

06-03-2008, 05:49 PM	#94
TAPOUT Professional STI Driver Car: 07 STI LTD #67 Fav Mod: Andrewtech built, Turbo XS tuned GT35R 624 AWHP. 528 AWTQ on VP C16 Location: Springfield, VA Posts: 464 Join Date: Oct 2006 Trader Rating: (1)	Re: 2007 STI - 513whp/437wtq Kelford 272 cams require machining the head. 264's are on their way to the rescue. Car should be running tomorrow.

06-03-2008, 06:45 PM	#95
STI-LOS Silver Member Car: 06 STI / STG 4 Fav Mod: DOM 3.0R + METH!!!! Location: Vernon, NJ Posts: 1,194 Join Date: Jan 2008 Trader Rating: (4)	Re: 2007 STI - 513whp/437wtq Thats gonna be kick ass bro.. LMK how you make out.. Good luck

06-04-2008, 06:45 PM	#96
TAPOUT Professional STI Driver Car: 07 STI LTD #67 Fav Mod: Andrewtech built, Turbo XS tuned GT35R 624 AWHP. 528 AWTQ on VP C16 Location: Springfield, VA Posts: 464 Join Date: Oct 2006 Trader Rating: (1)	Re: 2007 STI - 513whp/437wtq Due to weather and power outage ,we'll have to try again tomorrow.

06-06-2008, 06:24 AM	#97
TAPOUT Professional STI Driver Car: 07 STI LTD #67 Fav Mod: Andrewtech built, Turbo XS tuned GT35R 624 AWHP. 528 AWTQ on VP C16 Location: Springfield, VA Posts: 464 Join Date: Oct 2006 Trader Rating: (1)	Re: 2007 STI - 513whp/437wtq Cams are in, car runs. I'm picking it up in an hour. Jermaine from Turbo Xs is going to give it a quick road tune, and we will have it on the dyno Tuesday next week.

06-06-2008, 02:37 PM	#98
TAPOUT Professional STI Driver Car: 07 STI LTD #67 Fav Mod: Andrewtech built, Turbo XS tuned GT35R 624 AWHP. 528 AWTQ on VP C16 Location: Springfield, VA Posts: 464 Join Date: Oct 2006 Trader Rating: (1)	Re: 2007 STI - 513whp/437wtq Jermaine twisted his ankle, and Dan gave me a road tune to get me through the weekend. We are running pig rich at ~10:1 A/F until the tune on Tuesday. We had to bring 20% more fuel to get us up to where the cams were not leaning out up top. Idle is great, barely noticeable until you feel the difference in power above 5K. I can't wait to tune. I might have to send Jermaine a get well soon card...

06-06-2008, 05:40 PM	#100
mllrsti Professional STI Racer Posts: 707 Join Date: Dec 2004 Trader Rating: (0)	Re: 2007 STI - 513whp/437wtq Congrats to the OP. I hear you on adding more fuel up top, I had the same issue. STI-LOS, I can almost guarantee his car at idle with those cams sounds very similiar a to stock cammed STI with similar bolt ons, unless he disabled AVCS of course. Once he lets it rip though......HOLD ON. Last edited by mllrsti : 06-06-2008 at 05:44 PM.

06-07-2008, 01:26 AM	#102
Lebanese rally Champion Junior STI Driver Car: 04 Subaru WRX STi Fav Mod: Crawford Performance S5+CP35R,APS FMIC,MOTEC M800+ANTI LAG,Proflex Susp,Exedy Twinplate,Whitelinesss Location: Lebanon Posts: 71 Join Date: Apr 2005 Trader Rating: (0)	Re: 2007 STI - 513whp/437wtq good luck with your tune cant wait for some great numbers...