FS (FL): Cheap GT35R w/ WG and Injectors and FMIC

unix4linux · 04-08-2008, 06:26 AM

Hello All,

Here is the deal, I blew a piston and have to rebuild my engine. I don't have the funds to rebuild the engine and the car has been sitting there for a few months. I am too caught up making car payments (yes, on something I can't drive) before thinking of rebuilding.

So, I am trying to sell some parts that I know I won't need because when I rebuild, I will be going a little more aggressive. The parts have been out of the car for a while and ready to ship. These parts are in great condition (except FMIC) and have LOWWWWWWWWW miles on it. If I had to guess, I wouldn't say more than 5k miles if that and most of those miles were added while driving the car from Florida to NY to MD for tunning with Phil at Element Tuning so I def. drove the car with ease because there was no way I was going to get stranded driving to and from being that far away from home. So I never enjoyed the car!!

I have the GT35R .82 A/R SOLD
Tial 44mm WG SOLD
FMIC with pipping for a 2005 STi with Greddy Type R BOV SOLD
PE 850cc Fuel Injectors. SOLD
ACT 6 Puck Unsprung Clutch Kit w/ ACT Prolite flywheel $600 w/1500 miles AVAILABLE
Hydra EMS with Autotune $900 shipped. AVAILABLE

Now, the FMIC has a dent on it...not a big dent at all...perhaps the size of a quarter. It's just a dent and I think it was from a rock...not sure because I noticed it when I took the bumper off not while it happened. Never hindered performance and was tuned fine like this. The intake runner pipe from the intercooler has the BOV on it and also two tapped holes for the methanol injection jets so if you are not running meth, those will have to be welded or get a new pipe and just re-weld the BOV on it.

The fuel rail and lines I'll need so those are not included with the injectors.

The turbo is in great condition...no broken seals and no shaft play...doesn't need to be rebuilt.

I am asking $1k shipped.

Oh, and I am also including the DP for the turbo and the v-clamps. The braided lines and screws are also included but the rubber water feed line, yea, you shouldn't use my old one of course.

I do great packing and shipping. I ship the same day you order as long as it's not midnight ;-) and I do it Fed-Ex.

I don't have photos at the moment because I am at work posting this up but I will have them up tonight. If you are interested, just PM me or post back. I can part out as well but please don't low-ball either. Just because I am willing to let everything go for $1k doesn't mean I am going to sell something for $50-$100 bucks.

I believe this is over 50% discount...but then again, it's used ;-)....

Cya

UPDATE: Link to photos Picasa Web Albums - Tito - Turbo_STi_4Sale

I was not able to take a picture of the FMIC and the down-pipe because it's still on the car and I have a mess I forgot about in the garage. I get out of work early afternoon tomorrow so I promise to clean out some stuff and take more pictures for those interested.

I was thinking of selling my clutch and flywheel since I am going with a triple plate exedy. The clutch I have is the 6 puck unsprung ACT with the prolite flywheel. It's in my sig. I paid $1k for the combo at the time and it has about 1500 miles on it because I drove to NY with the stock clutch, put the new one on up there to drive 280 miles to MD to get the car tuned with it and from there drove the car down back home to FL which was about 1k miles...then I did some local driving for a few hundred miles before the engine going out. The clutch is pretty much new and capable of 650lbs/trq. $600 shipped to whoever wants it

05aspenwhitesti_centralnj · 04-08-2008, 06:48 PM

Damn I was looking to save some money and then I see this post. BUMP for an awesome deal and for me possibly taking it.

unix4linux · 04-09-2008, 09:19 AM

Anyone interested in the injectors? That's all I have left.

**EvO KiLLeR 2005** · 04-09-2008, 09:41 AM

Sold To Me

05aspenwhitesti_centralnj · 04-09-2008, 12:42 PM

DAMN I was totally looking to buy this. Too bad for me for not jumping on it. Bump for the injectors.

unix4linux · 04-09-2008, 04:28 PM

Quote:

Originally Posted by 05aspenwhitesti_centralnj

DAMN I was totally looking to buy this. Too bad for me for not jumping on it. Bump for the injectors.

Sorry...:-\

unix4linux · 04-09-2008, 06:23 PM

Added an ACT and Flywheel for sale at the last minute to whomever would like to buy it

unix4linux · 04-10-2008, 04:18 AM

Added pics for clutch in picture link

WXRTSI · 04-10-2008, 06:33 PM

pm'd about injectors.

WXRTSI · 04-10-2008, 06:40 PM

also are the clips included?

**EvO KiLLeR 2005** · 04-10-2008, 08:01 PM

Damn Wish I Had The Money For The Clutch And Flywheel Too. Bump For Great Deals.

unix4linux · 04-11-2008, 05:02 AM

Quote:

Originally Posted by WXRTSI

also are the clips included?

Replied and yep, the clips are included. I am selling them just as I got them.

santacruz02 · 04-11-2008, 05:19 AM

is there such thing as over sizing your injectors? i was going to buy DW 740's but these are available..

unix4linux · 04-11-2008, 05:49 AM

Quote:

Originally Posted by santacruz02

is there such thing as over sizing your injectors? i was going to buy DW 740's but these are available..

That, I am not sure of. I guess it comes down to what you are going to run with those injectors and tuning. Over-sizing might be considered if running too big on a smaller setup?

That is just my .02 though, don't quote me

unix4linux · 04-12-2008, 05:37 PM

Still have that clutch/flywheel and Injectors ;-)

04-08-2008, 06:26 AM	#1
unix4linux STI Driver Car: 05 Subaru WRX STi Fav Mod: Converting to Subie Location: Orlando, FL Posts: 278 Join Date: Nov 2004 Trader Rating: (4)	FS (FL): Cheap GT35R w/ WG and Injectors and FMIC Hello All, Here is the deal, I blew a piston and have to rebuild my engine. I don't have the funds to rebuild the engine and the car has been sitting there for a few months. I am too caught up making car payments (yes, on something I can't drive) before thinking of rebuilding. So, I am trying to sell some parts that I know I won't need because when I rebuild, I will be going a little more aggressive. The parts have been out of the car for a while and ready to ship. These parts are in great condition (except FMIC) and have LOWWWWWWWWW miles on it. If I had to guess, I wouldn't say more than 5k miles if that and most of those miles were added while driving the car from Florida to NY to MD for tunning with Phil at Element Tuning so I def. drove the car with ease because there was no way I was going to get stranded driving to and from being that far away from home. So I never enjoyed the car!! I have the GT35R .82 A/R SOLD Tial 44mm WG SOLD FMIC with pipping for a 2005 STi with Greddy Type R BOV SOLD PE 850cc Fuel Injectors. SOLD ACT 6 Puck Unsprung Clutch Kit w/ ACT Prolite flywheel $600 w/1500 miles AVAILABLE Hydra EMS with Autotune $900 shipped. AVAILABLE Now, the FMIC has a dent on it...not a big dent at all...perhaps the size of a quarter. It's just a dent and I think it was from a rock...not sure because I noticed it when I took the bumper off not while it happened. Never hindered performance and was tuned fine like this. The intake runner pipe from the intercooler has the BOV on it and also two tapped holes for the methanol injection jets so if you are not running meth, those will have to be welded or get a new pipe and just re-weld the BOV on it. The fuel rail and lines I'll need so those are not included with the injectors. The turbo is in great condition...no broken seals and no shaft play...doesn't need to be rebuilt. I am asking $1k shipped. Oh, and I am also including the DP for the turbo and the v-clamps. The braided lines and screws are also included but the rubber water feed line, yea, you shouldn't use my old one of course. I do great packing and shipping. I ship the same day you order as long as it's not midnight ;-) and I do it Fed-Ex. I don't have photos at the moment because I am at work posting this up but I will have them up tonight. If you are interested, just PM me or post back. I can part out as well but please don't low-ball either. Just because I am willing to let everything go for $1k doesn't mean I am going to sell something for $50-$100 bucks. I believe this is over 50% discount...but then again, it's used ;-).... Cya UPDATE: Link to photos Picasa Web Albums - Tito - Turbo_STi_4Sale I was not able to take a picture of the FMIC and the down-pipe because it's still on the car and I have a mess I forgot about in the garage. I get out of work early afternoon tomorrow so I promise to clean out some stuff and take more pictures for those interested. I was thinking of selling my clutch and flywheel since I am going with a triple plate exedy. The clutch I have is the 6 puck unsprung ACT with the prolite flywheel. It's in my sig. I paid $1k for the combo at the time and it has about 1500 miles on it because I drove to NY with the stock clutch, put the new one on up there to drive 280 miles to MD to get the car tuned with it and from there drove the car down back home to FL which was about 1k miles...then I did some local driving for a few hundred miles before the engine going out. The clutch is pretty much new and capable of 650lbs/trq. $600 shipped to whoever wants it This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by unix4linux : 04-29-2008 at 07:03 AM. Reason: Changed Hydra Price

04-08-2008, 06:48 PM	#2
05aspenwhitesti_centralnj Professional STI Driver Car: 2005 Aspen White STI Fav Mod: APS Catless R1 TurboBack Exhaust Location: Princeton, NJ Posts: 476 Join Date: Jan 2005 Trader Rating: (8)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Damn I was looking to save some money and then I see this post. BUMP for an awesome deal and for me possibly taking it.

04-09-2008, 09:19 AM	#3
unix4linux STI Driver Car: 05 Subaru WRX STi Fav Mod: Converting to Subie Location: Orlando, FL Posts: 278 Join Date: Nov 2004 Trader Rating: (4)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Anyone interested in the injectors? That's all I have left.

04-09-2008, 09:41 AM	#4
EvO KiLLeR 2005 Gold Member Car: 05 OBP STI Fav Mod: STG 2 Location: San Diego Posts: 114 Join Date: Feb 2008 Trader Rating: (2)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Sold To Me

04-09-2008, 12:42 PM	#5
05aspenwhitesti_centralnj Professional STI Driver Car: 2005 Aspen White STI Fav Mod: APS Catless R1 TurboBack Exhaust Location: Princeton, NJ Posts: 476 Join Date: Jan 2005 Trader Rating: (8)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC DAMN I was totally looking to buy this. Too bad for me for not jumping on it. Bump for the injectors.

04-09-2008, 06:23 PM	#7
unix4linux STI Driver Car: 05 Subaru WRX STi Fav Mod: Converting to Subie Location: Orlando, FL Posts: 278 Join Date: Nov 2004 Trader Rating: (4)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Added an ACT and Flywheel for sale at the last minute to whomever would like to buy it

04-10-2008, 04:18 AM	#8
unix4linux STI Driver Car: 05 Subaru WRX STi Fav Mod: Converting to Subie Location: Orlando, FL Posts: 278 Join Date: Nov 2004 Trader Rating: (4)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Added pics for clutch in picture link

04-10-2008, 06:33 PM	#9
WXRTSI Grassroots STI Racer Car: Blue, 06 STI Fav Mod: Accessport Location: NC Posts: 586 Join Date: Aug 2006 Trader Rating: (3)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC pm'd about injectors.

04-10-2008, 06:40 PM	#10
WXRTSI Grassroots STI Racer Car: Blue, 06 STI Fav Mod: Accessport Location: NC Posts: 586 Join Date: Aug 2006 Trader Rating: (3)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC also are the clips included?

04-10-2008, 08:01 PM	#11
EvO KiLLeR 2005 Gold Member Car: 05 OBP STI Fav Mod: STG 2 Location: San Diego Posts: 114 Join Date: Feb 2008 Trader Rating: (2)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC Damn Wish I Had The Money For The Clutch And Flywheel Too. Bump For Great Deals.

04-11-2008, 05:19 AM	#13
santacruz02 Junior STI Driver Car: Blue 06 Sti Location: NJ Posts: 106 Join Date: Aug 2006 Trader Rating: (0)	Re: FS Cheap GT35R w/ WG and Injectors and FMIC is there such thing as over sizing your injectors? i was going to buy DW 740's but these are available..

04-12-2008, 05:37 PM	#15
unix4linux STI Driver Car: 05 Subaru WRX STi Fav Mod: Converting to Subie Location: Orlando, FL Posts: 278 Join Date: Nov 2004 Trader Rating: (4)	Re: FS (FL): Cheap GT35R w/ WG and Injectors and FMIC Still have that clutch/flywheel and Injectors ;-) This ad is not endorsed by this member. Please register or login to hide this ad.