[scby rex]

Ok, Ive been thinking of moving my thread in the texas section to here for a while. Ive had my 02 bugeye since Oct of 2001. Its sat in storage during 2 Iraq tours and currently has 106k miles on it. The only old pics of it are on film, but my friend on nasioc took these after its most recent changes.

These pics are still about 5 mounths old and there are things that are differet now that are not in the pics. Sooo here we go.

[scby rex]

[wsirianni]

mod list???? power numbers??any other intel?? i like it tho really nice

[scby rex]

]

[scby rex]

Ok, heres the parts /mods list.
It weights 3046 with a full tank of 93

engine
ported vf34
Stock coated header
grimmspeed uppipe
APS dr 3.5 tbe
Cusco exhaust hangers (not in pics)
Perrin fuel rails (I hate these b/c I hate perrin but got them for 170 new)
SRI intake with HKS super mega reloaded filter
Samco inlet hose
Custom blitz reversed i/c piping
Custom reversed manifold by me (shaved all unused nubs)
grimmspeed 8mm manifold spacers
beatrush crank pulley
braille 15 lb battery
Cusco oil can converted to coolant over flow
AVO radiator
Samco coolant hoses
Samco flex hoses for coolant air sep
Greddy coolant tank (modded)
Zero sports rad caps
ECU tuning by gabedude
ARC oil pan
Tomei upper and lower oil baffels
Sard fpr, Thanks dlouie87
Canton/Meca 1 micron fuel filter and -6 AN lines
STi pink injectors
Walbro 255
70mm billet throttlebody, ported to match manifold
TGV deletes
crawford o/a seperator

Suspension/drivetrain/brakes
JIC FLT A2 coils with 10k springs
Cusco rear trailing arms
Cusco rear lateral links
Cusco front sway
Cusco Ti front stb
Cusco Carbon rear stb
Cusco 1.5 front lsd
Cusco verII 4 point brace
Cobb rear sway with hard mounts
Whiteline alk race
Whiteline rear lock bolts
Whiteline outrigger bush
Whiteline f/r spherical endlinks (STi)
Whiteline roll center kit (new version)
06 Sti front lower arms
06 STi R180 rear diff assy
06 STI front knuckles
6gunn speedo rings
GruppeN trans mount
Ver6 ra gears treated
ACT street lite flywheel and clutch
04 STi front axles
DSS 3 in alum ds
ARP ss 12pt ds bolts and nuts
removed front subframe
removed rear diff lower cover
06 STi brembos
Hawk HPS pads f/r
Stoptech lines
ATE blue fluid

Exterior
JDM projectors
JDM bumper beam
6.8 k HID
JDM scoop
spray painted skirts
gold foil heat shield
front bumper clips (not in pics)
Enkei NT03 +M 18x9.5 +40 et wheels
10mm front spacers
Rolled and pulled rear fender (not pulled in the pics)
Yoko S-drive 255/35
Project kics sbc lugs
Enkei "racing" caps
STi carbon markers

Interior
Custom black interior (headliner, alcantra door cards, pillars)
Sparco 215 suede wheel
Splash boss hub
Beatrush type b knob (not in pics)
Garage spec bent chrome shifter extender (not in pics)
Defi hood pod
Defi boost egt and oil pressure gauges
Sti shifter trim
Blitz turbo timer/voltage gauge
Defi type 2 controler
Kartboy SS
Alpine deck (would like to trade for pioneer or kenwood as its not compatible with my MP3 player)
3 1/2 inch shifter extender
SPARCO evo2 seat and brackets

I think thats it.
Plans are ej207 ver8 block and heads with a custom gt3076r setup. Maybe a 2.2 tomei stroker.
Thanks for the comments

BTW a/c is a must in the summer in TX, other weight mods are removed cruise, all trunk trims, heat shields under the car and removal of unnessesarry brackets and bolts. haha

[scby rex]

Heres a couple pics of a friends car and mine before he went to MN.




[/

[wsirianni]

srry dude i didnt realize u weren finished the thread haha mybad

[scby rex]

Thats cool man, no problem.

[Number9]

Rotated intake manifold.

[Kevin]

Love the pics!