Nor Cal Chat Thread - Page 1077

importfanatic17 · 05-21-2008, 11:01 AM

Quote:

Originally Posted by grambo

Not much. Still haven't heard from Ed at GarageSpec regarding the non-working horn in my million-dollar steering device.

I wil likely just purchase a Works-Bell hub and be done with it. jdmdave pm'd me and he said that his went in without any trouble at all and his horn works fine.

Meh, such is life when playing Subie.

Not doubting your wrenching skills but you have everything hooked up right, correct?

KiTsuNe · 05-21-2008, 11:05 AM

Quote:

Originally Posted by jph

a cobb map running lean?

are you running the CA 91 map?

J.

yes i am running 91 CA map

KiTsuNe · 05-21-2008, 11:09 AM

Quote:

Originally Posted by importfanatic17

When do you throw the code, only during WOT or when just cruising?

when i WOT in low gears, but its not consistant, right now everything is fine, but once in awhile i'll wot in first or second and throw the cel?

but if i drive for a bit after start up. i can wot all day and be fine

KiTsuNe · 05-21-2008, 11:12 AM

only thing i can think of is the plug for the egt felll out? i have the probe at home which im going to install tonight.

jph · 05-21-2008, 11:13 AM

Quote:

Originally Posted by importfanatic17

Not doubting your wrenching skills but you have everything hooked up right, correct?

when he turns the wheel left, the car goes right.
i think that he put it on backwards.

J.

grambo · 05-21-2008, 11:16 AM

Quote:

Originally Posted by importfanatic17

Not doubting your wrenching skills but you have everything hooked up right, correct?

Dude its two wires.

The way the hub is made, it looks like it has a brass contact plate built into the back covered in dielectric grease to make contact with ? in the column. As far as I can tell, the horns are powered under the hood and all I am doing is contacting the ground to the column to close the circuit and power the horns.
The hub does not seat flush and is backed up by the plastic assembly for the turn signals and wipers, etc. The clock-spring assembly and cruise control had to be removed. It also would not fit with the plastic-reset piece that automatically resets your signals when activated.
In speaking with a few other members that have done this mod, they had no problem at all, but with a different hub.

I've had the damn thing on and off 9 times now trying to troubleshoot the simplest circuit in the car. All I can come up with is that the hub will not work on an 06'.

Peleg · 05-21-2008, 11:27 AM

Hello.

MorePSiTehBett4 · 05-21-2008, 11:43 AM

Quote:

Originally Posted by Peleg

Hello.

hellooooooo, whazap peleg?

MorePSiTehBett4 · 05-21-2008, 11:48 AM

Quote:

Originally Posted by grambo

Not much. Still haven't heard from Ed at GarageSpec regarding the non-working horn in my million-dollar steering device.

I wil likely just purchase a Works-Bell hub and be done with it. jdmdave pm'd me and he said that his went in without any trouble at all and his horn works fine.

Meh, such is life when playing Subie.

sounds like no fun!

I wonder why his work's fine..that makes no sense...

KiTsuNe · 05-21-2008, 11:49 AM

ive been reading around, i think its my APS CAI?

flatthump · 05-21-2008, 11:56 AM

Quote:

Originally Posted by KiTsuNe

someone wanna help me? i threw a code

P0171

says im running too lean on bank 1

What did you touch during the install?

The stock 02 sensors are really delicate. Placing them on the ground too roughly can destroy them...it's ridiculous.

Check all this stuff.

P0171 CEL Thread - Everything you ever wanted to know? - NASIOC

importfanatic17 · 05-21-2008, 12:08 PM

Quote:

Originally Posted by MorePSiTehBett4

sounds like no fun!

I wonder why his work's fine..that makes no sense...

He said they have different hubs.

jagstyle · 05-21-2008, 12:09 PM

Quote:

Originally Posted by flatthump

What did you touch during the install?

The stock 02 sensors are really delicate. Placing them on the ground too roughly can destroy them...it's ridiculous.

Check all this stuff.

P0171 CEL Thread - Everything you ever wanted to know? - NASIOC

yeah, 02 sensor could be bad

jagstyle · 05-21-2008, 12:10 PM

Quote:

Originally Posted by KiTsuNe

ive been reading around, i think its my APS CAI?

I certainly wouldn't run an APS CAI untuned

KiTsuNe · 05-21-2008, 12:11 PM

Quote:

Originally Posted by flatthump

What did you touch during the install?

The stock 02 sensors are really delicate. Placing them on the ground too roughly can destroy them...it's ridiculous.

Check all this stuff.

P0171 CEL Thread - Everything you ever wanted to know? - NASIOC

thanks steve, im almost sure its either the front 02 sensor or the maf needs to be cleaned. Does anyone know the price of a new 02 sensor just incase i need to run out and buy one?

05-21-2008, 11:12 AM	#16144
KiTsuNe Spec C Club Car: The Vroom-mobile Fav Mod: JDM Gears Location: San Jose, California Posts: 2,334 Join Date: Jun 2005 Trader Rating: (1)	Re: Nor Cal Chat Thread only thing i can think of is the plug for the egt felll out? i have the probe at home which im going to install tonight.

05-21-2008, 11:27 AM	#16147
Peleg STI Guru Car: 04 Subaru WRX STi Fav Mod: Whooshing sounds Location: Death Valley Posts: 5,916 Join Date: Nov 2003 Trader Rating: (11)	Re: Nor Cal Chat Thread Hello.

05-21-2008, 11:49 AM	#16150
KiTsuNe Spec C Club Car: The Vroom-mobile Fav Mod: JDM Gears Location: San Jose, California Posts: 2,334 Join Date: Jun 2005 Trader Rating: (1)	Re: Nor Cal Chat Thread ive been reading around, i think its my APS CAI?