Burnin4's new ride!!!!!!!!!!!!!!!!!!!!! - Page 3

jgheels2003 · 10-08-2007, 05:50 AM

Quit breaking cv joints (

)

Can't wait for that 30psi tune!

Talon · 10-08-2007, 05:58 AM

man it is threads like this one that keeps me out of the member journals section. reading all about your awesome car makes me want to put more $$ into mine, lol. very nice job though, i am thoroughly jealous.

burnin4 · 10-08-2007, 10:13 AM

Quote:

Originally Posted by Talon

man it is threads like this one that keeps me out of the member journals section. reading all about your awesome car makes me want to put more $$ into mine, lol. very nice job though, i am thoroughly jealous.

no need to be jealous.....trust me, there is something to be said for simplicity and cheap. enjoy what you have!

***JDM-STI*** · 10-16-2007, 06:53 AM

Quote:

Originally Posted by burnin4

I believe I have finally figured out what I enjoy doing with my car.....taking unsuspecting friends/neighbors/coworkers for balzout pulls on c16, haha! It's funny watching the expression on their face while I'm banging through gears, they are forever changed (most of them). they get out of the car with a "wtf" expression, cracks me up.

You've got that right. It really blows people away to jump into a 4cyl and get planted so far into their seat when accelerating that they can't reach out and touch the dash. I love it!!! Awesome car Austin! I hope to follow in the "master's" foot steps one day.

And one more word to those who aren't anywhere near this far in the modding process, if you aren't a VERY patient person, you do not need to take modding this far. Trust me on that one and I'm sure Austin will back me here.

RFFG · 10-16-2007, 08:19 AM

Wicked setup, awesome car

burnin4 · 10-16-2007, 08:42 PM

Quote:

Originally Posted by JDM-STI

And one more word to those who aren't anywhere near this far in the modding process, if you aren't a VERY patient person, you do not need to take modding this far. Trust me on that one and I'm sure Austin will back me here.

yeah, this project took a whole lot longer than expected, I didnt turn the key for about 10 months. luckily i had my lgt to keep me entertained!

Flycaster · 10-16-2007, 09:08 PM

There are probably a couple dozen of us "slow learners" here now, so you're not alone amigo. Reminds me of the old Bob Seeger line, "Wish I didn't know now what I didn't know then."

dan avoN7 · 10-16-2007, 09:35 PM

Quote:

Originally Posted by burnin4

no need to be jealous.....trust me, there is something to be said for simplicity and cheap. enjoy what you have!

couldn't have said it any better.

sick setup, can't wait to see the 30+psi results.

300hp owen · 10-17-2007, 03:49 AM

what a wicked setup that is some hog busting power and damn the car looks GREAT on those enkeis and with the front lip, wow thats perfect.

good luck on your 10sec/ pass, its soon to be!

Quote:

Originally Posted by burnin4

I believe I have finally figured out what I enjoy doing with my car.....taking unsuspecting friends/neighbors/coworkers for balzout pulls on c16, haha! It's funny watching the expression on their face while I'm banging through gears, they are forever changed (most of them). they get out of the car with a "wtf" expression, cracks me up.

lol that is funny chit man, that is one of my favorite things with my v8rx7, people are shocked to see it in person and after a drive/ride in it theyre sparked with a whole new interest in cars while still feeling a little queasy from the speed and cars all around capability. ya gotta love having fun sharing the experience with people, that is such a big reason of why cars are great.

burnin4 · 10-17-2007, 04:58 AM

Quote:

Originally Posted by Flycaster

There are probably a couple dozen of us "slow learners" here now, so you're not alone amigo. Reminds me of the old Bob Seeger line, "Wish I didn't know now what I didn't know then."

c'mon now, I'm not falling for that, haha! you're a lot smarter/quicker than you come off.......I read your posts, you are one of the wise grasshoppers, haha! <--- nothing in reference to age!!!

sarasube · 10-17-2007, 05:06 AM

nice sounds on that vid.

great set up.

thanks

burnin4 · 10-18-2007, 11:29 AM

axles/cv joints arrive tomorrow, r180 already installed. should be up and running by saturday.

I"m headed back to the track next wed night, gonna try to find my next weakest link before we retune on c16 30psi+.

Also, if anyone is interested....I have convinced TopSpeed to have a customer appreciation day Nov 10th. We will be retuning my car on vp import for a race the following day in Montgomery. We should easily hit mid/upper 600's. Come on over to topspeed, I think they are going to have a car show, tour of the facility, meet the staff (including Valerie and SS), etc. should be a great time!

ec2k1gt · 10-18-2007, 12:06 PM

Congrats on the build man!

Glad to see your motor is running smooth. Im currently having Ron build me a stage 3 block with some mild headwork. Itll prob be a few more months till i can even think about turning the key though...haha

Anyways sweet car and hopefully everything go's smoothly for you this weekend, you have a monster on your hands thats for sure!

burnin4 · 10-23-2007, 07:12 PM

ok, i installed the r180 and axles, but still having problems. i think my center diff is toast, should find out very soon. my car doesnt move when i drive it in the auto mode, but will drive once the dccd is in the manual mode but only in full lock. i put my car on jackstands and drove in 1st gear, only the front wheels are moving.....could be a bad r180 or center diff. hope to find out soon.

burnin4 · 10-28-2007, 03:14 PM

good news and bad news....the r180 that i installed was a 3.54 instead of a 3.90. definitely not a good thing, car didnt like it at all. I ordered a brand new r180 with a 3.90 for the low low price of $1200, should be here bt wed/thur this week. so, for those of you that grenade a rear diff, make sure you match the proper gear ratio when finding a replacement (04/05 have 3.90 and 06/07 have 3.54).

I'm getting really good at removing/installing rear diffs/axles, got it down to 1.5hrs by myself, haha! I should be up and running by the end of the week. I refuse to miss the import showdown Nov 11th.

still have plans for a retune on Nov 10th, expecting 500+ on 93 pump/19-20psi, and mid 600's on c16/30psi.

10-08-2007, 05:50 AM	#31
jgheels2003 Spec C Club Car: '04 Cobra Location: Greensboro, NC Posts: 1,192 Join Date: Oct 2004 Trader Rating: (3)	Re: the beast has risen!!!!! Quit breaking cv joints () Can't wait for that 30psi tune! This ad is not endorsed by this member. Please register or login to hide this ad.

10-08-2007, 05:58 AM	#32
Talon STI Driver Car: 06 white on gold Fav Mod: 100 lbs of torque Location: 11 miles north of the 313 Posts: 232 Join Date: Apr 2006 Trader Rating: (0)	Re: the beast has risen!!!!! man it is threads like this one that keeps me out of the member journals section. reading all about your awesome car makes me want to put more $$ into mine, lol. very nice job though, i am thoroughly jealous.

10-16-2007, 08:19 AM	#35
RFFG Spec C Club Car: 1998 Impreza GF8 Location: Miami, Fl. Posts: 2,266 Join Date: Aug 2005 Trader Rating: (3)	Re: the beast has risen!!!!! Wicked setup, awesome car

10-16-2007, 09:08 PM	#37
Flycaster S204 Racer Posts: 2,949 Join Date: Apr 2004 Trader Rating: (0)	Re: the beast has risen!!!!! There are probably a couple dozen of us "slow learners" here now, so you're not alone amigo. Reminds me of the old Bob Seeger line, "Wish I didn't know now what I didn't know then."

10-17-2007, 05:06 AM	#41
sarasube STI Driver Car: 04 aspen white Location: NY Posts: 264 Join Date: Feb 2006 Trader Rating: (1)	Re: the beast has risen!!!!! nice sounds on that vid. great set up. thanks

10-18-2007, 11:29 AM	#42
burnin4 The Next Petter Solberg Car: 10 sec STi, 08 Z06 Fav Mod: TopSpeed Posts: 970 Join Date: Aug 2004 Trader Rating: (3)	Re: the beast has risen!!!!! axles/cv joints arrive tomorrow, r180 already installed. should be up and running by saturday. I"m headed back to the track next wed night, gonna try to find my next weakest link before we retune on c16 30psi+. Also, if anyone is interested....I have convinced TopSpeed to have a customer appreciation day Nov 10th. We will be retuning my car on vp import for a race the following day in Montgomery. We should easily hit mid/upper 600's. Come on over to topspeed, I think they are going to have a car show, tour of the facility, meet the staff (including Valerie and SS), etc. should be a great time!

10-18-2007, 12:06 PM	#43
ec2k1gt Junior STI Driver Car: 06 OBP STI Location: Plainfield, IL Posts: 104 Join Date: Oct 2006 Trader Rating: (4)	Re: the beast has risen!!!!! Congrats on the build man! Glad to see your motor is running smooth. Im currently having Ron build me a stage 3 block with some mild headwork. Itll prob be a few more months till i can even think about turning the key though...haha Anyways sweet car and hopefully everything go's smoothly for you this weekend, you have a monster on your hands thats for sure!

10-23-2007, 07:12 PM	#44
burnin4 The Next Petter Solberg Car: 10 sec STi, 08 Z06 Fav Mod: TopSpeed Posts: 970 Join Date: Aug 2004 Trader Rating: (3)	Re: the beast has risen!!!!! ok, i installed the r180 and axles, but still having problems. i think my center diff is toast, should find out very soon. my car doesnt move when i drive it in the auto mode, but will drive once the dccd is in the manual mode but only in full lock. i put my car on jackstands and drove in 1st gear, only the front wheels are moving.....could be a bad r180 or center diff. hope to find out soon.

10-28-2007, 03:14 PM	#45
burnin4 The Next Petter Solberg Car: 10 sec STi, 08 Z06 Fav Mod: TopSpeed Posts: 970 Join Date: Aug 2004 Trader Rating: (3)	Re: the beast has risen!!!!! good news and bad news....the r180 that i installed was a 3.54 instead of a 3.90. definitely not a good thing, car didnt like it at all. I ordered a brand new r180 with a 3.90 for the low low price of $1200, should be here bt wed/thur this week. so, for those of you that grenade a rear diff, make sure you match the proper gear ratio when finding a replacement (04/05 have 3.90 and 06/07 have 3.54). I'm getting really good at removing/installing rear diffs/axles, got it down to 1.5hrs by myself, haha! I should be up and running by the end of the week. I refuse to miss the import showdown Nov 11th. still have plans for a retune on Nov 10th, expecting 500+ on 93 pump/19-20psi, and mid 600's on c16/30psi. This ad is not endorsed by this member. Please register or login to hide this ad.