T3h Pink Penguin AKA Dirty Wheels - Page 8

T3h_Clap · 04-13-2007, 08:49 AM

Recieved some goodies in the last few weeks.

RCE linear rear spring conversion for my KW's

need to order up my swift springs and rear cusco camber plates.

and then, wheels and new rubber.

sitting on a Beatrush Rear bulkhead that i cant decide if i want to install or not.

it's not legal for BSP since i need to keep my rear seats intact.

T3h_Clap · 04-13-2007, 09:10 AM

I forgot to add,

I recently installed DBA 4000 Slotted rotors (Front) and Project Mu B-Force pads (all around).

and I couldn't be happier.

very good street pad, havn't autox'd on the B-Forces since i Run my LM900s for autox but my next event i'm tempted to see how well the b-forces do.

i've got 20 ltrs of extra S waiting to go into my tranny and some Subaru Rear Diff Oil as well. just need to find the time to get it all done.

should replace the brake fluid aswell.

Motul RBF600 should do the trick

**evilSTi7** · 04-13-2007, 11:58 AM

looks awesome man. That oil cooler set up (i'm assuming that's what it is) is really well done.

dailydriversti · 04-13-2007, 12:00 PM

Dat oilcooler is

off da chizzain y0.

T3h_Clap · 04-13-2007, 12:01 PM

Quote:

Originally Posted by evilSTi7

looks awesome man. That oil cooler set up (i'm assuming that's what it is) is really well done.

thanks, took some custom fabricating to get it to work.

Peanut Eye bumper beam doesn't equal Bugeye bumper beam

it works really well too, which is scary.

can't have it exposed when i'm on the high, oil temps wont go past 80...(that's when the thermostat opens).

T3h_Clap · 04-13-2007, 12:08 PM

Quote:

Originally Posted by dailydriversti

Dat oilcooler is

off da chizzain y0.

it's JDM yo!

dailydriversti · 04-13-2007, 12:08 PM

Quote:

Originally Posted by T3h_Clap

it's JDM yo!

Fo sheezy y0.

T3h_Clap · 04-13-2007, 12:32 PM

Quote:

Originally Posted by dailydriversti

Fo sheezy y0.

i need more JDM though.

teamtech harnesses!!

<ibnotjdmyo>

skubv8 · 04-14-2007, 12:05 AM

nice JDM oil cooler bro

lol that custom bracketry

jdmdave · 04-14-2007, 06:38 AM

Quote:

Originally Posted by T3h_Clap

i need more JDM though.

teamtech harnesses!!

<IBNOTJDMYO>

u need alot more jdm

T3h_Clap · 04-14-2007, 06:40 AM

Quote:

Originally Posted by jdmdave

u need alot more jdm

i never claimed to be a baller.

JDM doesn't just fall out of the sky....well i guess it could if the plane fell out of the sky, but we wouldn't want that.

jdmdave · 04-14-2007, 07:28 AM

Quote:

Originally Posted by T3h_Clap

i never claimed to be a baller.

JDM doesn't just fall out of the sky....well i guess it could if the plane fell out of the sky, but we wouldn't want that.

never said u were a baller i just said u need more jdm

, and if it rain jdm parts i would be in heaven

ps that oil cooler is mad pimp

T3h_Clap · 04-14-2007, 08:56 AM

Quote:

Originally Posted by jdmdave

ps that oil cooler is mad pimp

it works too.

Chris05STi · 04-18-2007, 10:35 AM

Pics of the ARC windmasters....Guessing you had to cut for that piece?

T3h_Clap · 04-18-2007, 11:16 AM

yup. cut the fenderliner behind the oil cooler so the air could get out.

i'll take pics once finals are over and i finally wash the car.

04-13-2007, 08:49 AM	#106
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,323 Join Date: Dec 2004 Trader Rating: (5)	Recieved some goodies in the last few weeks. RCE linear rear spring conversion for my KW's need to order up my swift springs and rear cusco camber plates. and then, wheels and new rubber. sitting on a Beatrush Rear bulkhead that i cant decide if i want to install or not. it's not legal for BSP since i need to keep my rear seats intact. This ad is not endorsed by this member. Please register or login to hide this ad.

04-18-2007, 10:35 AM	#119
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,706 Join Date: Jun 2005 Trader Rating: (27)	Re: T3h Pink Penguin AKA Dirty Wheels Pics of the ARC windmasters....Guessing you had to cut for that piece?

04-18-2007, 11:16 AM	#120
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,323 Join Date: Dec 2004 Trader Rating: (5)	Re: T3h Pink Penguin AKA Dirty Wheels yup. cut the fenderliner behind the oil cooler so the air could get out. i'll take pics once finals are over and i finally wash the car. This ad is not endorsed by this member. Please register or login to hide this ad.

04-13-2007, 09:10 AM	#107
T3h_Clap Wheel33tist Whore Car: Aspen White GDF-D Fav Mod: Pastelito Racing / SFSOC Location: 0R!4ND0 Posts: 21,323 Join Date: Dec 2004 Trader Rating: (5)	I forgot to add, I recently installed DBA 4000 Slotted rotors (Front) and Project Mu B-Force pads (all around). and I couldn't be happier. very good street pad, havn't autox'd on the B-Forces since i Run my LM900s for autox but my next event i'm tempted to see how well the b-forces do. i've got 20 ltrs of extra S waiting to go into my tranny and some Subaru Rear Diff Oil as well. just need to find the time to get it all done. should replace the brake fluid aswell. Motul RBF600 should do the trick

04-13-2007, 11:58 AM	#108
evilSTi7 The Hoff Fan Club, member #001 Car: 05 WRB/Gold Fav Mod: Hood Scoop Homer Location: Where ever The Hoff is! Posts: 10,325 Join Date: Jul 2004 Trader Rating: (4)	looks awesome man. That oil cooler set up (i'm assuming that's what it is) is really well done.

04-13-2007, 12:00 PM	#109
dailydriversti OT stealth mod Car: 06 obp sti Fav Mod: Vodka injection. Location: iowa Posts: 30,668 Join Date: Aug 2004 Trader Rating: (1)	Dat oilcooler is off da chizzain y0.

04-14-2007, 12:05 AM	#114
skubv8 394/600 Location: The Malaise Peninsular Posts: 2,384 Join Date: Sep 2006 Trader Rating: (0)	nice JDM oil cooler bro lol that custom bracketry