Chris05STi's 2005 OBP STi Journal (Black Betty) Full-Race Goodies Ordered!!! - Page 53

**evilSTi7** · 09-04-2006, 09:19 AM

Quote:

Originally Posted by eatV8

Not really, this is the normal when a track event is run by a car club renting the track. When it is a bigger event such as SCDA there is flag people etc, but the day also costs twice as much.

no i get that, and i get that it keeps cost down, but i have a feeling most of those guys have no experience. i would still do a track day there no problem.

Chris05STi · 09-05-2006, 05:22 AM

Mod Update:

Thinking of what little mods I could get to make my daily driving more exciting. Def thinking of getting:
1. Whiteline Rear Subframe Lock Bolts
2. Whiteline 05+ WRX and STi Steering rack bushings
3. Whiteline Anti-lift Kit - Sport
4. Kartboy Crossmember Bushings (Yah..somehow I lost them at an install meet!!

)
5. Cusco or Perrin Master Cylinder Brake Booster (WHICH ONE?)
6. Cusco Engine/Tranny Mounts

Let me know what you guys think!

***Neanderthal Racing*** · 09-05-2006, 05:33 AM

Quote:

Originally Posted by Chris05STi

Mod Update:

Thinking of what little mods I could get to make my daily driving more exciting. Def thinking of getting:
1. Whiteline Rear Subframe Lock Bolts
2. Whiteline 05+ WRX and STi Steering rack bushings
3. Whiteline Anti-lift Kit - Sport
4. Kartboy Crossmember Bushings (Yah..somehow I lost them at an install meet!!

)
5. Cusco or Perrin Master Cylinder Brake Booster (WHICH ONE?)
6. Cusco Engine/Tranny Mounts

Let me know what you guys think!

1. i have a set of wl subframe bolts. ricky refused to put them on my car because he didn't like them. i'll sell them to you for cost if you want them, chris.
2. i thought the '05's didn't need sterring rack bushings.
3. might do one of those myself.
4. if it's from kartboy it must be good (blatant sponsor endorsement)
5. don't know anything about it but i can't imagine you'd need to boost anything with a set of ss braided lines, pagids (blue or yellow) and some motul or castrol brake fluid.
6. get them (but learn to love the noise and nvh).

Chris05STi · 09-05-2006, 05:38 AM

Thanks Bruce! I will def take those Whiteline Subframe bolts! Let me know what/how you want me to take them off your hands

! With the ACPT CF DS, I don't have any noticeable noise or vibration. I have been in Al's car (RacerXS) and he has the same setup....doesn't seem like it would take long to get used to

. As you know, I will be a GT-Spec whore later in the next month

.

***Neanderthal Racing*** · 09-05-2006, 05:48 AM

you just can't get it TOO stiff, chris...if you know what i mean.

Chris05STi · 09-09-2006, 02:37 PM

Well, today I went to Jordan's house (Aka Uncle Lewie) and washed, claybared, washed, and waxed the car. It came out perfect yet again. This is the second time I have used this kit on my car and its like glass as Steve (MacSTi) told you guys. I bought the Meguiar's kit from PepBoys for like $18.99 and got the Step 3 Carnuba wax, and its great. Here are some pics:

Here is a good pic of the HotSubarus.com Tail Light tint (Smoke) and the Third Brake Light tint (Smoke):

AHHA! ACPT CF Driveshaft with the revised yoke...0 PROBLEMS!

Thanks to Bruce selling me these...Whiteline Subframe Locking Bolts...should be a really nice mod Dave (aka Stee) said he loves his!

trnkmnky · 09-09-2006, 02:41 PM

wow, looks great chris.

***iTSTi*** · 09-09-2006, 02:45 PM

You're gay bro. Did you pay off your CC's before you got these? I'm so broke now, if you have some extra dollars, let me know

***VSGTS14*** · 09-09-2006, 05:08 PM

bro you need some other **** compared to that little **** you listed...idk what but you need more lol.

uncle lewie · 09-09-2006, 05:43 PM

Thanks Chris for letting me drive it. Shes nice and fast. And damn that carbon fiber drive shaft.

***VSGTS14*** · 09-09-2006, 06:14 PM

you need some sort of suspension on that mutha

AndrewSS · 09-09-2006, 06:29 PM

Nice, let us know how you like those lock bolts

***Neanderthal Racing*** · 09-09-2006, 06:33 PM

Quote:

Originally Posted by Chris05STi

Thanks to Bruce selling me these...Whiteline Subframe Locking Bolts...should be a really nice mod Dave (aka Stee) said he loves his!

youre welcome chris! the car looks great.

kts262 · 09-09-2006, 07:23 PM

Quote:

Originally Posted by AndrewSS

Nice, let us know how you like those lock bolts

+1. I want to know how you like them too.

BlackSTI2006 · 09-09-2006, 07:52 PM

wat are you using to keep the silver bbs's so clean im having the worst time cleaning mine i take the pressure washer to them at the shop but im rarely there enough to use it....i tried black magic wheel cleaner and it did good now its just not working for me haha....looks awsome i gotta get out the claybar for mine soon too

09-05-2006, 05:22 AM	#782
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 8,900 Join Date: Jun 2005 Trader Rating: (20)	Mod Update: Thinking of what little mods I could get to make my daily driving more exciting. Def thinking of getting: 1. Whiteline Rear Subframe Lock Bolts 2. Whiteline 05+ WRX and STi Steering rack bushings 3. Whiteline Anti-lift Kit - Sport 4. Kartboy Crossmember Bushings (Yah..somehow I lost them at an install meet!! ) 5. Cusco or Perrin Master Cylinder Brake Booster (WHICH ONE?) 6. Cusco Engine/Tranny Mounts Let me know what you guys think! Last edited by Chris05STi : 09-05-2006 at 05:25 AM.

09-05-2006, 05:38 AM	#784
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 8,900 Join Date: Jun 2005 Trader Rating: (20)	Thanks Bruce! I will def take those Whiteline Subframe bolts! Let me know what/how you want me to take them off your hands ! With the ACPT CF DS, I don't have any noticeable noise or vibration. I have been in Al's car (RacerXS) and he has the same setup....doesn't seem like it would take long to get used to. As you know, I will be a GT-Spec whore later in the next month .

09-09-2006, 07:52 PM	#795
BlackSTI2006 STI Driver Car: 06 FPGREENSTI SOLD Fav Mod: 04 GMC Sierra 2500HD Crew Cab Duramax Diesel Location: Fitchburg, MA Posts: 252 Join Date: Jan 2006 Trader Rating: (0)	wat are you using to keep the silver bbs's so clean im having the worst time cleaning mine i take the pressure washer to them at the shop but im rarely there enough to use it....i tried black magic wheel cleaner and it did good now its just not working for me haha....looks awsome i gotta get out the claybar for mine soon too This ad is not endorsed by this member. Please register or login to hide this ad.

09-05-2006, 05:48 AM	#785
*Neanderthal Racing* Support Our Sponsors Car: CUTN EDG project Fav Mod: $20. mudflaps from auto zone Location: my cave Posts: 5,709 Join Date: Dec 2003 Trader Rating: (1)	you just can't get it TOO stiff, chris...if you know what i mean.

09-09-2006, 02:37 PM	#786
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 8,900 Join Date: Jun 2005 Trader Rating: (20)	Well, today I went to Jordan's house (Aka Uncle Lewie) and washed, claybared, washed, and waxed the car. It came out perfect yet again. This is the second time I have used this kit on my car and its like glass as Steve (MacSTi) told you guys. I bought the Meguiar's kit from PepBoys for like $18.99 and got the Step 3 Carnuba wax, and its great. Here are some pics: Here is a good pic of the HotSubarus.com Tail Light tint (Smoke) and the Third Brake Light tint (Smoke): AHHA! ACPT CF Driveshaft with the revised yoke...0 PROBLEMS! Thanks to Bruce selling me these...Whiteline Subframe Locking Bolts...should be a really nice mod Dave (aka Stee) said he loves his!

09-09-2006, 02:41 PM	#787
trnkmnky The Next Petter Solberg Car: 06 Subaru WRX Fav Mod: winshield washer fluid Location: jersey Posts: 887 Join Date: Apr 2006 Trader Rating: (4)	wow, looks great chris.

09-09-2006, 02:45 PM	#788
*iTSTi* Platinum Member Car: 2006 Subaru Fav Mod: JDM "Baby In Car" Location: NJ Posts: 866 Join Date: Mar 2005 Trader Rating: (6)	You're gay bro. Did you pay off your CC's before you got these? I'm so broke now, if you have some extra dollars, let me know

09-09-2006, 05:08 PM	#789
*VSGTS14* Muller Chevrolet Car: 05 WRB STi Fav Mod: fp green Location: Milford, NJ Posts: 9,425 Join Date: Oct 2004 Trader Rating: (8)	bro you need some other ** compared to that little ** you listed...idk what but you need more lol.

09-09-2006, 05:43 PM	#790
uncle lewie Spec C Club Car: 06 Aspen White w. Go Fav Mod: teH Muff Location: New Jersey Posts: 2,027 Join Date: Apr 2006 Trader Rating: (7)	Thanks Chris for letting me drive it. Shes nice and fast. And damn that carbon fiber drive shaft.

09-09-2006, 06:14 PM	#791
*VSGTS14* Muller Chevrolet Car: 05 WRB STi Fav Mod: fp green Location: Milford, NJ Posts: 9,425 Join Date: Oct 2004 Trader Rating: (8)	you need some sort of suspension on that mutha

09-09-2006, 06:29 PM	#792
AndrewSS S204 Racer Car: 05 Subaru WRX STi Fav Mod: RCE T2 Coilovers Location: Columbus, OH Posts: 4,598 Join Date: Jun 2005 Trader Rating: (21)	Nice, let us know how you like those lock bolts