Chris05STi's 2005 OBP STi Journal (Black Betty) First Start-up vid on first post!! - Page 76

Chris05STi · 02-01-2007, 02:56 PM

Update:

JDM TGV Deletes are ordered, once I get them, I will send them out to get ported.

Also picked up some Subaru swag....SPT Billet Battery Tie down to complete the SPT Oil cap I have.

***VSGTS14*** · 02-01-2007, 04:50 PM

SPT is really on the ball with their products now, they got more and more **** coming out like every month.
it's nice too.

RacerXS · 02-02-2007, 05:53 AM

Looks like all good choices Chris, only thing I would be "maybe" about is the 725.....that thing is BIG!
I am running the 12lb spring currently in my Tial BOV, but will be switching to the 11lb that is sitting in my garage....seems like when I let off partially when in boost only on the highway I get a bit of compressor surge. When I let off all the way it dumps fine, weird. From what I hear the 11lb spring and will cure this.
The Tial Waste gate spring is the 18-1/2lb, this seems to be perfect for the amount of boost I am making (26-27lbs).

Quote:

Originally Posted by Chris05STi

Nothing really to update....

Just waiting for the Custom SZ55 from Deadbolt to come to my house! Their phone lines are down, so its a bit harder to get in contact with them. Can't wait to see what it will look like!

So far, after researching and looking up other setups and results, this is whats on my list to buy for my tune that will prob happen in July or August:

-PE 850cc Injectors
-APS DR 725 FMIC (Black with the APS Logo on the front)
-APS Headers (Jet Hot Coated along with the Up-pipe, and heat shielded)
-APS Fuel Rail System (Don't like how the rubber Fuel line is snug under the intake manifold)
-APS 70mm CAI
-Tial BOV (Red) 11 Psi Spring?
-Tial 44mm Wastegate (Red) 8 Psi or 10 Psi Spring?
-JDM TGV's (ported)
-Blitz SBC-ID3 Boost Controller
-SUN Cyber Speed Voltage System (JDM Bling)
-SUN Hyper Force Ignition System (JDM Bling)
-Koyo Radiator (Not needed before tune)
-Cusco Engine/Tranny Mounts (Not needed before tune)

I think thats about it really, other than a tune for Meth and w/o Meth. I will prob buy NGK 1-Step colder plugs again (to make sure its all fresh for the tune). Now, I just need to get AWESOME pricing on these things, and start to order some.....that will begin by this week or begining of next week.

Chris05STi · 02-09-2007, 04:45 AM

JDM TGV's are in along with my SPT Billet Battery holder!!!!!!!!!!!

Next up...I am prob going to order either the APS 70mm CAI, or the Tial Bov (Red)..........ADAM........I will be calling you soon next week!

Chris05STi · 02-09-2007, 09:02 AM

Ok here is how she was before I worked on her

After some work (not the full job as I was tooo tired to do everything I normally do).

TOOLS!!! Apparently Harbor Frieght is down in Bricktown...which isn't far from my house really.....so I went there, and just went bananas on some tools I have been needing....now all I need is a power invertor for the car so I can use these at the track if they don't have any outlets...anyone know of any good power invertors?

(2 gallon air compressor, 1/2" Impact Gun *for taking/putting lugs on*, Mini Fuse set, another 18v battery for the light I have, 1/2" Deep Sockets (Metric) for the Impact Gun).

**nandanrp** · 02-09-2007, 09:09 AM

Winter + salt is the best isn't it

I'd love to wash my car, but for the fact that it's been below 20 degrees for over a week, and I don't want the damn doors to freeze shut

Chris05STi · 02-09-2007, 09:14 AM

Well its nice when you have a friend from H.S. who owns a detail shop 2 mins away....and lets you use his stuff with no charge......

**nandanrp** · 02-09-2007, 09:16 AM

Ahh that's convenient

I park outside, so even if I get it washed, I'm afraid the wet door seals will freeze

SpeedingTicketsIncluded · 02-09-2007, 09:19 AM

Quote:

Originally Posted by Chris05STi

Ok here is how she was before I worked on her

).

hahahahahaha you purposely didn't take care of her so you have an "excuse" to shop for new "toys" huh?

Car looks good. If you need more "excuses" let me know I'll send you my Focus!

uncle lewie · 02-09-2007, 11:46 AM

Youve got a website or address to the place you went to buy the tools?

You should be fined for letting it get that dirty.....

Stik11 · 02-09-2007, 12:17 PM

Quote:

Originally Posted by uncle lewie

Youve got a website or address to the place you went to buy the tools?

You should be fined for letting it get that dirty.....

yea what he said especially when u talk ish about my car being dirty

***VSGTS14*** · 02-09-2007, 12:47 PM

ugh dirty car ftl! i'm not washing mine till weather is ok again lol.

Chris05STi · 02-09-2007, 06:59 PM

^Billy, you have like an 8 bay building where you can detail the car INSIDE with heat and everything.....man if I had that, my car would be like your car is in the summer...spotless!

Heres the website Jordan....you can drive to Bricktown and shop right inside!
http://www.harborfreight.com/

uncle lewie · 02-09-2007, 07:52 PM

Quote:

Originally Posted by Chris05STi

^Billy, you have like an 8 bay building where you can detail the car INSIDE with heat and everything.....man if I had that, my car would be like your car is in the summer...spotless!

Heres the website Jordan....you can drive to Bricktown and shop right inside!
http://www.harborfreight.com/

Thanks. If you ever wanna come over and use my powerwasher for inside your wheel wells your more then welcome.

Chris05STi · 02-10-2007, 08:00 AM

^Thanks bro...I def need to buy a power washer...they work sooooo well with getting this crap off the car/rims/inner wheel wells.

02-01-2007, 02:56 PM	#1126
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	Update: JDM TGV Deletes are ordered, once I get them, I will send them out to get ported. Also picked up some Subaru swag....SPT Billet Battery Tie down to complete the SPT Oil cap I have. This ad is not endorsed by this member. Please register or login to hide this ad.

02-10-2007, 08:00 AM	#1140
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	^Thanks bro...I def need to buy a power washer...they work sooooo well with getting this crap off the car/rims/inner wheel wells. This ad is not endorsed by this member. Please register or login to hide this ad.

02-01-2007, 04:50 PM	#1127
*VSGTS14* Muller Chevrolet Car: 08 Chevy 2500HD Fav Mod: a new 08 STi Location: Milford, NJ Posts: 10,010 Join Date: Oct 2004 Trader Rating: (11)	SPT is really on the ball with their products now, they got more and more **** coming out like every month. it's nice too.

02-09-2007, 04:45 AM	#1129
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	JDM TGV's are in along with my SPT Billet Battery holder!!!!!!!!!!! Next up...I am prob going to order either the APS 70mm CAI, or the Tial Bov (Red)..........ADAM........I will be calling you soon next week!

02-09-2007, 09:02 AM	#1130
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	Ok here is how she was before I worked on her After some work (not the full job as I was tooo tired to do everything I normally do). TOOLS!!! Apparently Harbor Frieght is down in Bricktown...which isn't far from my house really.....so I went there, and just went bananas on some tools I have been needing....now all I need is a power invertor for the car so I can use these at the track if they don't have any outlets...anyone know of any good power invertors? (2 gallon air compressor, 1/2" Impact Gun for taking/putting lugs on, Mini Fuse set, another 18v battery for the light I have, 1/2" Deep Sockets (Metric) for the Impact Gun).

02-09-2007, 09:09 AM	#1131
nandanrp Indiatr0n in yo IWDPL Car: 05FTW OBP STi Fav Mod: Brum Brum Location: downtown Chicago Posts: 48,830 Join Date: Jun 2004 Trader Rating: (11)	Winter + salt is the best isn't it I'd love to wash my car, but for the fact that it's been below 20 degrees for over a week, and I don't want the damn doors to freeze shut

02-09-2007, 09:14 AM	#1132
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	Well its nice when you have a friend from H.S. who owns a detail shop 2 mins away....and lets you use his stuff with no charge......

02-09-2007, 09:16 AM	#1133
nandanrp Indiatr0n in yo IWDPL Car: 05FTW OBP STi Fav Mod: Brum Brum Location: downtown Chicago Posts: 48,830 Join Date: Jun 2004 Trader Rating: (11)	Ahh that's convenient I park outside, so even if I get it washed, I'm afraid the wet door seals will freeze

02-09-2007, 11:46 AM	#1135
uncle lewie Spec C Club Car: 06 Aspen White w. Go Fav Mod: teH Muff Location: New Jersey Posts: 2,078 Join Date: Apr 2006 Trader Rating: (7)	Youve got a website or address to the place you went to buy the tools? You should be fined for letting it get that dirty.....

02-09-2007, 12:47 PM	#1137
*VSGTS14* Muller Chevrolet Car: 08 Chevy 2500HD Fav Mod: a new 08 STi Location: Milford, NJ Posts: 10,010 Join Date: Oct 2004 Trader Rating: (11)	ugh dirty car ftl! i'm not washing mine till weather is ok again lol.

02-09-2007, 06:59 PM	#1138
Chris05STi I Has a Turbo Timer Car: 2005 Subaru WRX STi Fav Mod: Every single one! Location: NJ Posts: 9,733 Join Date: Jun 2005 Trader Rating: (27)	^Billy, you have like an 8 bay building where you can detail the car INSIDE with heat and everything.....man if I had that, my car would be like your car is in the summer...spotless! Heres the website Jordan....you can drive to Bricktown and shop right inside! http://www.harborfreight.com/