[GotSTI?]

Don't date Milfs?

[funSTi]

Take a brown paper bag and a hot iron. Put the paper over the crayon and lightly set the iron on the paper. Don't leave it on there a long time, just repeat this process and you will see a moisture buildup on the paper. I have personal experience doing this, so if you need help just PM me.

[Vez]

Originally Posted by LTD472

Use a rag or an old T-shirt you don't need and an iron. Place the rag over the crayon and iron it, no steam. Don't set the iron too hot though, I don't want you to burn your seat either. Lift the rag and some of the crayon should now be on the rag. Repeat with a clean side of the rag until you get the crayon off your seat. Good luck.

+1

Never did that with Alcantra, but a lot of other materials and it works like a charm.

[astaticwinter]

If the back seat isn't Alcantra, I'd third that method using an iron and a paper bag, scrap shirt, etc...

If not, the bag or ice or an icepack should work fine.

-TJ

[lethal734]

I would recommend using a paper bag and an iron. Place the paper bag on the crayon and then iron over it. The crayon will stick to the bag.