TurboXS TBE Install---YAY

WRC~06~STi · 07-20-2007, 11:43 AM

sorry put in wrong thread...moved to Engine/Power/Performance

GSRREP · 07-20-2007, 12:27 PM

Hey man-

Good to hear you got the exhaust all hooked up!

Yes I used my stock hangers, but I also have 2 Kartboy XL hangers if you think you need them, just PM me!

As for the muffler situation....if you didnt mind running 2.5", you could always hack off the stock axelback section from the stock muffler and have it re-welded on to the magnaflow.

The other option is just to get some 3" stainless piping, and roughly cut and weld the approx angles to clear the rear diff. It will do the same for performance and sound...If you look at some of the high flowing axelbacks (Nur Spec for example) the piping is more or less straight, rather than bending like some of the quiet 3" pieces or the stocker. Let me know if you need any guidance or shizz. Enjoy!

07-20-2007, 11:43 AM	#1
WRC~06~STi Silver Member Car: 06STi K7GSX-R 600 Fav Mod: Stage 2 Catless!!!!! Location: Western NC Posts: 918 Join Date: Jul 2007 Trader Rating: (2)	TurboXS TBE Install---YAY sorry put in wrong thread...moved to Engine/Power/Performance This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by WRC~06~STi : 07-20-2007 at 12:10 PM.

07-20-2007, 12:27 PM	#2
GSRREP Professional STI Driver Car: 05 Sti Fav Mod: my girlfriend Location: Beantown Posts: 424 Join Date: Jul 2005 Trader Rating: (5)	Re: TurboXS TBE Install---YAY Hey man- Good to hear you got the exhaust all hooked up! Yes I used my stock hangers, but I also have 2 Kartboy XL hangers if you think you need them, just PM me! As for the muffler situation....if you didnt mind running 2.5", you could always hack off the stock axelback section from the stock muffler and have it re-welded on to the magnaflow. The other option is just to get some 3" stainless piping, and roughly cut and weld the approx angles to clear the rear diff. It will do the same for performance and sound...If you look at some of the high flowing axelbacks (Nur Spec for example) the piping is more or less straight, rather than bending like some of the quiet 3" pieces or the stocker. Let me know if you need any guidance or shizz. Enjoy! This ad is not endorsed by this member. Please register or login to hide this ad.