[Jesse]

SOLVED!

without removing your bumper!!!

you need THESE! :

i have an extra set of these plugs if anyone needs. i can ship them to you. i can get more if a few of you need them! let me know

i got these from my work in parts... (GM Dealer)
should be able to find them in other locations, ill check and post any up.

-------------------------------------------

what you need:

*perrin front plate delete ( Perrin Performance - Welcome)

*allen key for the provided screws

*2x plastic push in tabs (above)

and

10 minutes

--------------------------------------------------

process:

-take anything out of the front plate screw holes.

-push in the said plastic tabs, they should pop right in with not to heavy of a force

- put the perrin plate up to the area, and use the screws provided. you will need the correct allen key.

*note- it will concave a tiny bit, it is normal because it cannot sit flat.

simple right?

results! awesome look for a decent price!

[Dragicon]

doesnt it just use the pre existing holes for the license plate???! is this what you are trying to install?

[Jesse]

Originally Posted by Dragicon

doesnt it just use the pre existing holes for the license plate???! is this what you are trying to install?

exactly. but you need the bolt BEHIND the bumber to screw it in...

[KrazyKarl]

Originally Posted by Szumita

exactly. but you need the bolt BEHIND the bumber to screw it in...

I got the autospeed version of that and it came with star drive screws that thread into the license plate holes. The screws weren't normal star drive though, there's a small peg in the center of them so they require a matching driver with a hole in the center (i guess to prevent it from getting stolen as easily). I think you could probably find screws that'd work for you at home depot though. Or you could go to autozone and just get regular license plate screws and that should work too.

[Mack]

just make sure they are stianless, you don't want them rusting come winter.

[Alex]

I dunno, auto grade double sided tape (red) ?

[Jesse]

hmm yeah. i thought of tape, but i donno how well it would hold. i guess auto grade would, so yeah. im gonna go to home depot after school and look for some screws that will be bigger and fit. ill keep this updated... maybee anchor screws...?

[Drag-On]

Originally Posted by Szumita

hmm yeah. i thought of tape, but i donno how well it would hold. i guess auto grade would, so yeah. im gonna go to home depot after school and look for some screws that will be bigger and fit. ill keep this updated... maybee anchor screws...?

Some 3M heavy duty double sided tape will be more than enough to hold it into place. Most hardware stores sells them.

[Jesse]

Originally Posted by Drag-On

Some 3M heavy duty double sided tape will be more than enough to hold it into place. Most hardware stores sells them.

ill have to grab some of this if i cant find any screws.

[Wes]

id say just look for some screws that arent too ugly and that will fit nicely into the hole