[Tuning Factory]

We at Tuning Factory have run into a ton of problems with the some of the aftermarket offerings for motor mounts. They have be failing after a large amount of torque is applied to a mount set for a good period of time, so in conjunction with Avid Racing we have designed a Semi Billet Motor mount that has a Billet outer shell with a Eurothane inner sleeve to give it some dampening under idle..........take a look and tell me what you think.



Retail is $360 a set......IWSTI special is $300 a set............ALSO TRANS MOUNTS COMING TOO!!!!

SAMCO

Turbo Inlet Hose $290 Shipped while supplies last!!!
Coolant Hose Kit $105 Shipped while supplies last!!!
Ancillary Hose Kit $125 Shipped while supplies last!!!
I/C Hose Kit $96 Shipped while supplies last!!!

Ground shipping on all orders, price covers basic 48 states!!!

ALSO!!
TXS/Apex'I/Greddy/HKS/Manley/Walbro/PE/Mahle/Wiseco/ARP/Buddy Club/KOYO/Samco!!!! WE WILL NOT BE UNDERSOLD!!!

TXS Stealthbacks-CALL FOR BEST PRICE
TXS Turbobacks-CALL FOR BEST PRICE
TXS Downpipes-CALL FOR BEST PRICE
TXS Uppipes-CALL FOR BEST PRICE


Apex'I-WS II Ceramic coated pipe Stainless Steel muffler and tip $430 shipped
Apex'I-N1 Ceramic coated pipe Stainless Steel muffler and tip $450 shipped
Apex'I-GT Spec Fully Stainless Steel $550 shipped
Limited addition TI(titanium) N1 cat-back $850 shipped

Buddy Club Spec 3 Stainless Steel $488 shipped

Greddy-Evo 2 Stainless Steel $585 shipped
Greddy-SP2 Stainless Steel $540 shipped

IF YOU FIND A BETTER PRICE I WILL MATCH IT IF NOT BEAT IT!!!!!!!

Mahle Pistons is one of the world's best OEM and Aftermarket piston manufacturers in the market. They make pistons for f1, Cart, Nascar and now they offer pistons for the performance aftermarket!!!!

There pistons are a fully coated. They have a Dry oil coating on the top and a friction coating on the side to avoid piston skirt and cylinder wall wear.

$480 shipped!!!!

Wiseco Pistons are one of the most up and coming pistons manufacturers that have been a sleeping giant in the Sport Compact/Import Performance industry but as of late had been sharing it's vast technological knowledge that had only been seen in the Domestic end of the industry with the Subaru community. These pistons are a 2618 alloy that is skirt coated and comes with a lightened pin, a strong chromoly ring pack. These pistons are also offered in a fully coated piston as well.

$500 shipped for the skirt coated set!!!!
$550 shipped for the fully coated set!!!!

Manley a very well known name in the Automotive industry for valves, rods, springs and retainers in the domestic end of the industry has brought there knowledge or rod manufacturing to the Sport Compact Industry with a huge push into the Subaru market.

I now have a stock length STI rod made for me in lots of 20 from Manley.

$740 shipped!!!!

You can never finish a good motor building without using some sort of fastener for your motor from ARP the leading fastener manufacturer.

I have a ton of head studs instock and ready to ship.

$178 shipped!!!!

the whole package is $1355 shipped!!!!

$3600 shipped on a fully build oem new short block, oem bearings with Crower rods, Mahle pistons, ARP head studs and fully assembly with shipping!!!

We now will be offering a full sleeved big bore 2.5-2.7L blocks that are closed deck(and not welded closed) like some we have seen. This is a full sleeve process that we have done and you can go as big as 103mm's!!!!! The sleeving process will run about $2100 shipped.

Please give us a shout if you have interest. Pay attention soon for our Billet Stroker cranks that will be coming out soon for about $3000-3100 shipped. They will come in 79mm and 83mm stroke. Give us a shout if your interested.

KOYO

Koyo Radiators (p/n r2704) $425 Shipped

KOYO/SAMCO Combo

Samco/Koyo Combo's for $525 Shipped

PE Injectors

PE 800CC Top Feed and 850CC Side Feed $510 Shipped

Walbro $71.99 shipped for the walbro 255LPH pump

TURBO XS

TURBO XS SUPER SALE!!!!!

ALL TO LOW TO PRINT!!!!!

Turbo XS UTEC WRX and STI
Turbo XS Map Selectors
Turbo XS Knocklites
Turbo XS Exhausts-Stealthbacks, and Turbo Backs
Turbo XS Uppipes
Turbo XS Downpipes
Turbo XS Intakes
Turbo XS Intercoolers-FMIC and TMIC
Turbo XS BOV's
Turbo XS BOV KIT's
Turbo XS Manual Boost Controllers-Single, Dual and Three Stage

Fujita Short Ram Intakes-$155 Shipped!
Comes with a Duffel Bag,Sweet Hat, and a NOS Energy Drink!!!
Come get them while they last!!!




WE GUARANTEE THE LOWEST PRICES!!!!! IF YOU FIND IT LOWER I WILL MATCH IT OR BEAT IT!!!!!!!
WE WILL NOT BE UNDERSOLD ON IN-STOCK ITEMS!!!!!!!!!

All Items are good in stock. While supplies last!!!!!

Please PM or IM on AIM at tuningfactorysl2 if you have any questions.

Overnight does not cover Alaska, Hawaii and Puerto Rico.

[Stee]

(-----)

[Tuning Factory]

Bumptizzle

[Tuning Factory]

Bumptizzle

[Tuning Factory]

BUmp!

[Tuning Factory]

Bumping it up!

[Tuning Factory]

Bumptizzle

[Tuning Factory]

Bumping it up!

[Tuning Factory]

Bump!

[Tuning Factory]

BUmpitizzle!

[Tuning Factory]

Bumping it up!

[LightWerkz]

Any advantages over Cusco motor/tranny mount set since its pricier?

[Tuning Factory]

Originally Posted by ESsTeAEyEe

Any advantages over Cusco motor/tranny mount set since its pricier?

Under high horsepower applications, Cusco mounts have trouble controlling engine movement and mount movement. The Avid/Tuning Factory ones are 60% billet, and 40% Urethane. It helps our boxer motors keep things in check, reduces engine movement and mount movement. If you have any other questions, feel free to ask, and I will be glad to answer to the best of my knowledge.

Thanks,
Zak

[Tuning Factory]

Bumping it up!

[Tuning Factory]

Bumptizzle!