[Methodbuilt.com]

HKS Legamax exhaust systems now available at Methodbuilt!!!



08 STi Dual Ti x2 Rear section only - $1125
08 STi Center section ONLY/ for use with Legamax muffler and Stock Muffler - $425

-------------------------------------------------------------------------
2008 STI/WRX AEM Intake $255!

36 HP and 35 TQ Gains



AEM is proud to introduce its new Cold Air Induction System for the 2008 Subaru Impreza WRX and WRX STI (part # 21-478WR). The largest power gains for the 21-478WR (tested on STI) are 36 horsepower at 5,300 RPM and 35 lbs/ft of torque at 5,300 RPM as measured on Harman Motive’s All-Wheel-Drive Mustang Dynamometer. The same kit tested on a WRX model generated 13 horsepower at 5,500 RPM and 14 lbs/ft of torque at 4,100 RPM on Harman Motive’s All-Wheel-Drive Mustang Dynamometer. Dyno results and a description of AEM’s dyno and temperature testing procedures, along with a list of applications, are available on the company’s website at AEM.
AEM Cold Air intakes are dyno-tested against the competition to deliver unsurpassed performance. Each system is tuned on the dyno to deliver maximum torque and horsepower, and monitor OBDII sensors, Mass Airflow sensor (MAF) signal voltage and fuel trims during this process to ensure that all readings are within OEM parameters, eliminating the chance of a throwing a check engine light.

All Cold Air intakes are constructed of CNC, mandrel-bent 6063 aluminum, and feature reinforced, TIG-welded brackets and fittings for maximum durability. AEM also includes a heavy-duty steel heatshield with a powdercoated black finish, a complete hardware kit and comprehensive installation instructions with every Cold Air intake system. The 21-478WR comes in a special wrinkle-red finish specifically for the Subaru Impreza models. In addition of the standard 6063-aluminum pipe, AEM includes a built-in air straightener for this application, which keeps CELs away and fuel trims in line with the factory.


All AEM intakes include AEM’s revolutionary DRYFLOW synthetic performance air filter; the first cleanable, reusable performance air filter that does not require oiling to filter and trap dirt and contaminants (more DRYFLOW key features can be found below).

DRYFLOW Air Filter Key Features:

·Will NOT void your vehicle’s warranty!
·No oil eliminates chance of under- or over-oiling, taking the guesswork out of servicing
·Filter element cleans in minutes and is Guaranteed for Life!
·Unique filter media is independently tested at up to 99.52% cumulative filtration efficiency to particles as small as one micron, based on ISO 5011:2000 FINE DUST performance testing. Visit AEM for independent filtration test results
·A mineral reinforced plastic interior cage increases structural rigidity—it’s virtually impossible to collapse!
·No mesh screen means a reduced chance of filter damage from bumps during installation or cleaning
·Pending CARB exemption

All AEM Cold Air intake systems carry a limited lifetime warranty and are either 50-state legal or pending, excluding “Off Road” only systems which are identified in AEM’s application guides. Some AEM products are legal in California only for racing vehicles, which may never be used upon a highway. AEM designs, manufactures and assembles its cold air intake systems in the U.S.A.

-------------------------------------------------------------------

Time to upgrade to the best available built motor and keep your car on the track.



Cosworth EJ25 (STI) short block has gone through countless hours of dyno evaluation to determine the best combination of parts to guarantee maximum reliable performance. Each EJ25 short block starts with a brand new Subaru case. The case is inspected and then the bores are honed to perfection to receive Cosworth Forged Pistons. We then balance the rotating assembly that includes a new STI Forged crank and Cosworth Forged H-Beam Connecting Rods to within .5 gram. The select parts are professionally assembled by one of Cosworth’s skilled engine builders using our own coated, tri metal race spec bearings.

Specification

New Subaru EJ25 STI Engine Case
New Subaru STI Forged Crankshaft
Cosworth Forged Connecting Rods
Cosworth Forged Pistons
Cosworth High Performance Piston Rings
Cosworth Race Spec coated Tri- Metal Bearings
Balanced and Professionally assembled
Billet Crankshaft optional


We have professional install services available for you.

PM for prices


Thanks,
Cory


We just started having a special on Tanabe Products, including their turboback complete exhaust for 02-07 WRX and STI's

From Their Site:

We took turbocharged car exhaust tuning one step further in the development of the complete turbo back exhaust, CONCEPT G BLUE

This complete system includes a full SUS304 stainless downpipe and cat delete pipe that have thicker construction to withstand the heat of extreme exhaust gas temperatures. The catback portion of this system features lightweight SUS304 piping with a specialized full Inconel tip.

This system maximizes flow efficiency for the largest power gains and will greatly benefit vehicles running higher amounts of boost. This system is capable of handling the flow needs of extremely modified vehicles. Tailored for turbo car driver who enjoys boost.
(Please see Application chart for photos and additional information about these systems.

These systems come with an optional removeable silencer)


















PM for best pricing

We are having a special on all in stock JIC Magic exhaust systems, available for immediate delivery or install.

98-01 Impreza


Spartan DE Stainles Steel catback system ( also available in twin tip and full titanium )


Spartan 505S Full Titanium catback system


Spartan 505S Stainless Steel catback system


Spartan 505S Semi-Titanium catback system


Spartan DE Type 2 Titanium canister ( also available in single tip and in stainless steel )


02-07 WRX including STi


Spartan DE Titanium Twin Tip catback system ( also available in single tip and stainless steel )


Spartan 505S Full Titanium catback system


Spartan 505S Semi-Titanium catback system


Stainless Steel exhaust manifold



Please PM for prices and availability

[subaru_sti293]

This short block can handle How many hp? and How much the price for the STI 07?

[Methodbuilt.com]

pm returned a while ago, motors are pretty

[neverendingmods]

Price shipped to 19805? Standard crank.

[Methodbuilt.com]

crazy install prices...

[mofoSTI]

If I still had my 04 I would hit you up on this

[Methodbuilt.com]

tempting myself

[bbong]

Price shipped to 11223.

[Methodbuilt.com]

PM sent.

[Bob815]

Sent you a PM.

Thanks,
Bob

[NOSti]

whats the price shipped to 33142? Please quote standard crank and billet crank.

What is the hp rating of this motor?

[Methodbuilt.com]

PM sent

[ocpokesmot]

price shipped to 92861

[wrxcelration]

shipped to 18037 w. both crank prices

[JohnDoe]

Can I get a price for both the standard crank and billet crank?