[bigjon75]

http://www.cobbforums.com/forums/showthread.php?t=36639

We have tested the firmware as best we can, but this is beta firmware, and something could go wrong. USE AT YOUR OWN RISK. We will work as quickly as possible to remedy any issues that come up, but be aware that your AccessPORT and/or ECU may need to be shipped to us for repair.

http://www.accessecu.com/support/ap_beta/installAP.exe <- RUN FIRST
http://www.accessecu.com/support/ap_...Pupdate20L.exe
http://www.accessecu.com/support/ap_...Pupdate25L.exe

Please complete the following steps on your vehicle and notify us of any issues (including usability issues):

1) After updating the firmware, verify that 'Show Map' displays the correct maps
2) Apply realtime Anti-theft map, key off and back on, and verify that the vehicle will not start
3) Reset the ECU to clear the Anti-theft map, verify that the vehicle will start
4) Verify that 'Show Map' displays the same map for realtime and reflash after reset
5) Uninstall and reinstall your AccessPORT
6) Use live data and performance tests

Please post your vehicle information along with any comments after you've ran through the steps above.

Version: 1.1.0.0 Beta
Changes/Improvements:
* Significantly faster startup time (~15 seconds)
* Faster install and change map performance
* Improved progress indication
* Better stability and error condition troubleshooting
* Completely new graphics with improved on-screen prompts
* Detailed information of DTCs
* All new splash screens
* Auto-connect to AP Manager
* Localized menu text in English and Japanese
* Improved system architecture to allow features and vehicles to be added faster

[bigjon75]

We have fixed the following issues:

* 2007 STI/WRX dynamic advance reading
* 2003 WRX realtime
* Live Data no longer crashes upon key off
* Change Map no longer indicates key cycle after realtime change

KNOWN ISSUES:
* Anti-Theft realtime map doesn't work with Launch Control base maps
* Lots of maps on the Accessport cause a hang when checking available maps

Please re-download the update files to get the fixes and let us know if the issues above are still present. Once updated, the firmware version displayed in the About screen should be 'v1.1.0.0-3768'.

http://www.accessecu.com/support/ap_...Pupdate20L.exe
http://www.accessecu.com/support/ap_...Pupdate25L.exe