AP V2 0-60 and 1/4 mile times

JustinH · 08-26-2007, 05:34 PM

im curious to see what other people are running with their set up so post ur mods and ur times ....

last night i found a pretty flat road by my house (slightly inclined ) and tried the 0-60 test. Im running the stage 1 91 oct acn map with LC set at 5K and no FFS. The AP said that im running 0-60 in 6.1 seconds

and that im cutting a 60' of 2.35 seconds

. I really doubt that im that ****ty of a driver; with LC and proper technique off the launch how am i getting such bad times? I think that when the LC is bouncing off the 5K rev limiter the car inches forward very slightly, causing the AP to prematurly being recording the time. Anyone care to chime in on what is the cause of this crap

JustinH · 08-26-2007, 08:06 PM

anyone???

mofoSTI · 08-26-2007, 08:08 PM

I have seen on a stage 2 map a 0-60 of 3.9 and a 12.4 quarter mile. I think crewshief has a vid of his stage 2 results.

JustinH · 08-27-2007, 11:07 AM

^ a vid would be nice kuzz im really lost. but thanks for putting up ur times, thats pretty damn fast

JD_STI · 08-27-2007, 11:16 AM

Those two features on the AP are completely useless and inaccurate. The best way to get an accurate 0-60 and 1/4 mile time is at the strip.

JustinH · 08-27-2007, 11:19 AM

^ thats kind of what i was thinking, but i didn't wanna just jump to that conclusion. Yet some people on here are getting good times so i dunno

JD_STI · 08-27-2007, 11:23 AM

Quote:

Originally Posted by JustinH

^ thats kind of what i was rhinkinf, but i didn't wanna just jump to that conclusion. Yet some people on here are getting good times so i dunno

I tried it a few times when I first got my AP, I was getting like 10 seconds because as soon as the wheels start tirning, even from just reving, it starts counting. How are you supposed to rev the car and stay perfectly still

JustinH · 08-27-2007, 11:37 AM

Quote:

Originally Posted by JD_STI

I tried it a few times when I first got my AP, I was getting like 10 seconds because as soon as the wheels start tirning, even from just reving, it starts counting. How are you supposed to rev the car and stay perfectly still

haha exactly... so im not the only one after all. but then how are some people cutting sub 4 sec times

oscargarza88 · 08-27-2007, 12:00 PM

i'm galad u broguth this up, becuas ei havve the same setup as u and i also ran like a 6.3 or somethign like that, and i know im not that bad of a driver... i did it a couple of timeas sn i still coudnt bet much better... so i gave up...

JustinH · 08-27-2007, 12:18 PM

yah i tried multiple times and got anywhere from 6.1-6.3 secs. Today i tried LC at 5K and FFS set at just above 5K and i managed a 5.9 sec run. i just dont get why they released such a crappy feature

JD_STI · 08-27-2007, 12:21 PM

Quote:

Originally Posted by JustinH

haha exactly... so im not the only one after all. but then how are some people cutting sub 4 sec times

I'm sure it works for some people, it's just not consistent. I haven't tried it out for a while so maybe I'll give it another shot.

**tyler_sti** · 08-27-2007, 12:23 PM

^lol. Its just to get an idea. A very broad one at that.

JD_STI · 08-27-2007, 12:27 PM

Quote:

Originally Posted by tyler_sti

^lol. Its just to get an idea. A very broad one at that.

Why do you think I don't ever use it. Worthless tool IMO. I didn't ever expect it to be accurate.

JustinH · 08-27-2007, 04:12 PM

maybe if you pull the parking brake up then the car woulnt move? or just forget about the stupid feature and move on

BoxerGrowl · 08-28-2007, 12:35 PM

The ground just isn't flat enough. I don't use the e brake at the strip and can bounce the revs around 5k without moving. So can a lot of people.

Also I imagine the AP is reading the mph directly from the ECU which is probably different that what is actually indicated on the speedo. Anyone who is calculating 0-60 using the speedo (magazines?) is going to come up with faster times than the AP.

Also my 12.9 runs at the strip and 1.70 60 ft times only yield 4.9-5.0 0-60 times according to both enginuity and excel.

08-26-2007, 05:34 PM	#1
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	AP V2 0-60 and 1/4 mile times im curious to see what other people are running with their set up so post ur mods and ur times .... last night i found a pretty flat road by my house (slightly inclined ) and tried the 0-60 test. Im running the stage 1 91 oct acn map with LC set at 5K and no FFS. The AP said that im running 0-60 in 6.1 seconds and that im cutting a 60' of 2.35 seconds. I really doubt that im that ****ty of a driver; with LC and proper technique off the launch how am i getting such bad times? I think that when the LC is bouncing off the 5K rev limiter the car inches forward very slightly, causing the AP to prematurly being recording the time. Anyone care to chime in on what is the cause of this crap This ad is not endorsed by this member. Please register or login to hide this ad.

08-26-2007, 08:06 PM	#2
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	Re: AP V2 0-60 and 1/4 mile times anyone???

08-26-2007, 08:08 PM	#3
mofoSTI Spec C Club Car: 08 STI,sr20det 510 Fav Mod: boob job for wife Location: springtuckey, OR Posts: 2,140 Join Date: Sep 2004 Trader Rating: (0)	Re: AP V2 0-60 and 1/4 mile times I have seen on a stage 2 map a 0-60 of 3.9 and a 12.4 quarter mile. I think crewshief has a vid of his stage 2 results.

08-27-2007, 11:07 AM	#4
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	Re: AP V2 0-60 and 1/4 mile times ^ a vid would be nice kuzz im really lost. but thanks for putting up ur times, thats pretty damn fast

08-27-2007, 11:16 AM	#5
JD_STI Spec C Club Car: 07 STI OBP Fav Mod: Zzyzx Coilovers Location: SoCal Posts: 1,147 Join Date: Jul 2007 Trader Rating: (0)	Re: AP V2 0-60 and 1/4 mile times Those two features on the AP are completely useless and inaccurate. The best way to get an accurate 0-60 and 1/4 mile time is at the strip.

08-27-2007, 11:19 AM	#6
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	Re: AP V2 0-60 and 1/4 mile times ^ thats kind of what i was thinking, but i didn't wanna just jump to that conclusion. Yet some people on here are getting good times so i dunno Last edited by JustinH : 08-27-2007 at 11:36 AM.

08-27-2007, 12:00 PM	#9
oscargarza88 Professional STI Racer Car: 06 Subaru WRX STi Fav Mod: Cobb Xaust! Location: Houston,tx Posts: 637 Join Date: Mar 2006 Trader Rating: (0)	Re: AP V2 0-60 and 1/4 mile times i'm galad u broguth this up, becuas ei havve the same setup as u and i also ran like a 6.3 or somethign like that, and i know im not that bad of a driver... i did it a couple of timeas sn i still coudnt bet much better... so i gave up...

08-27-2007, 12:18 PM	#10
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	Re: AP V2 0-60 and 1/4 mile times yah i tried multiple times and got anywhere from 6.1-6.3 secs. Today i tried LC at 5K and FFS set at just above 5K and i managed a 5.9 sec run. i just dont get why they released such a crappy feature

08-27-2007, 12:23 PM	#12
tyler_sti Gold Member Car: '07 CMG STI Fav Mod: carbing subframe, driving experience:) Location: los angeles Posts: 3,033 Join Date: Aug 2006 Trader Rating: (11)	Re: AP V2 0-60 and 1/4 mile times ^lol. Its just to get an idea. A very broad one at that.

08-27-2007, 04:12 PM	#14
JustinH Spec C Club Car: 07 STI OBP Fav Mod: we will see soon... Location: southern orange county(la Posts: 1,391 Join Date: Jul 2006 Trader Rating: (1)	Re: AP V2 0-60 and 1/4 mile times maybe if you pull the parking brake up then the car woulnt move? or just forget about the stupid feature and move on

08-28-2007, 12:35 PM	#15
BoxerGrowl Amateur STI Driver Car: 04 STi Location: Greencastle, PA Posts: 38 Join Date: Mar 2006 Trader Rating: (0)	Re: AP V2 0-60 and 1/4 mile times The ground just isn't flat enough. I don't use the e brake at the strip and can bounce the revs around 5k without moving. So can a lot of people. Also I imagine the AP is reading the mph directly from the ECU which is probably different that what is actually indicated on the speedo. Anyone who is calculating 0-60 using the speedo (magazines?) is going to come up with faster times than the AP. Also my 12.9 runs at the strip and 1.70 60 ft times only yield 4.9-5.0 0-60 times according to both enginuity and excel. This ad is not endorsed by this member. Please register or login to hide this ad.