*New* Botox Bolts IN stock

**tom@kartboy** · 04-08-2008, 12:50 PM

It was either that name, Viagra or Guantanamo Bolts. i still might change it

Just hit me today. Rear subframe lockdown kits. You know what they do and why you need them. i wont waste your time.
Works on almost every subaru except the new 80 WRX's/leggys

*SPECIAL* introductory price of 25.00 SHIPPED in the USA.
While supplies last, limited time only,yadda yadda yadda.

BOTOX BOLTS

KB-066

**WESTI** · 04-08-2008, 01:19 PM

im not big into suspension stuff so can you explain to me what these do? and will i need an alignment after i install them?

**tom@kartboy** · 04-08-2008, 01:25 PM

Well it looks like i need to spend a little more time explaining them

.
these will fit in the open holes on the rear subframe. the factory uses these holes for an alignment when they are assembling the cars. then they use the soft rubber mounts to hold the rear subframe to the car. these bolts will help keep everything from moving around. you might check Scoobymods or the install pages here to see how they are installed. There are a few other companies that have these on the market with great results. After numerous customers asking to make them. we finally did

T

***BoostJunkie*** · 04-08-2008, 01:39 PM

Is it safe to assume these are easier to install than the Whiteline version? If so count me in

**tom@kartboy** · 04-08-2008, 02:45 PM

being that its a 2pc setup it might be easier than the WL ones.

T

JJ18Sniper · 04-08-2008, 03:10 PM

Nice, definitely a possibility to do now

**tom@kartboy** · 04-10-2008, 11:21 AM

TTT
these are FLYING off the shelves!!!

get them before the intro price goes up

t

**tom@kartboy** · 04-13-2008, 07:15 AM

TTT
just finished packaging up a ton more of these kits. get them before the intro price is over.

tom

***snorky*** · 04-13-2008, 07:29 AM

Quote:

Originally Posted by BoostJunkie

Is it safe to assume these are easier to install than the Whiteline version? If so count me in

what was so hard about the WL?

loosen the four subframe bolts and screw the locking bolts in.

**tom@kartboy** · 04-19-2008, 06:29 PM

TTT last day for the intro special.

Tom

jmanrex · 04-20-2008, 01:30 PM

Quote:

Originally Posted by tom@kartboy

TTT last day for the intro special.

Tom

just placed an order since that was the case

***snorky*** · 04-20-2008, 02:00 PM

Tom,

This may be the incorrect place to ask this but... Have you looked into replacing the actual subframe bushings with a higher durometer rubber? I haven't pulled my subframe apart or ever really studied it as far as how the bushings are in place (ie pressed, cast, etc) but it seems like this would be a better solution if it's possible to remove the bushings.

**tom@kartboy** · 04-20-2008, 07:20 PM

Quote:

Originally Posted by snorky

Tom,

This may be the incorrect place to ask this but... Have you looked into replacing the actual subframe bushings with a higher durometer rubber? I haven't pulled my subframe apart or ever really studied it as far as how the bushings are in place (ie pressed, cast, etc) but it seems like this would be a better solution if it's possible to remove the bushings.

Good question. i'll have to look and see if i have an old X member at the shop to see how they are installed

t

FritoBandito · 04-20-2008, 07:23 PM

Quote:

Originally Posted by jmanrex

just placed an order since that was the case

me dos

***snorky*** · 04-20-2008, 07:25 PM

Quote:

Originally Posted by tom@kartboy

Good question. i'll have to look and see if i have an old X member at the shop to see how they are installed

t

excellent. I have a feeling the bushings are cast in the member.

04-08-2008, 12:50 PM	#1
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	New Botox Bolts IN stock It was either that name, Viagra or Guantanamo Bolts. i still might change it Just hit me today. Rear subframe lockdown kits. You know what they do and why you need them. i wont waste your time. Works on almost every subaru except the new 80 WRX's/leggys SPECIAL introductory price of 25.00 SHIPPED in the USA. While supplies last, limited time only,yadda yadda yadda. BOTOX BOLTS KB-066 This ad is not endorsed by this member. Please register or login to hide this ad.

04-08-2008, 01:19 PM	#2
WESTI Gold Member Car: 06 WRB STI Fav Mod: HKS CARBON TI Location: Irvine, Ca Posts: 5,228 Join Date: Apr 2006 Trader Rating: (7)	*Re: New* Botox Bolts IN stock** im not big into suspension stuff so can you explain to me what these do? and will i need an alignment after i install them?

04-08-2008, 01:25 PM	#3
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	*Re: New* Botox Bolts IN stock** Well it looks like i need to spend a little more time explaining them . these will fit in the open holes on the rear subframe. the factory uses these holes for an alignment when they are assembling the cars. then they use the soft rubber mounts to hold the rear subframe to the car. these bolts will help keep everything from moving around. you might check Scoobymods or the install pages here to see how they are installed. There are a few other companies that have these on the market with great results. After numerous customers asking to make them. we finally did T

04-08-2008, 01:39 PM	#4
*BoostJunkie* Sold My Soul For Mods Car: '05 CGM STi Fav Mod: Track Time Location: Bethesda, MD Posts: 6,360 Join Date: Jun 2004 Trader Rating: (12)	*Re: New* Botox Bolts IN stock** Is it safe to assume these are easier to install than the Whiteline version? If so count me in

04-08-2008, 02:45 PM	#5
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	*Re: New* Botox Bolts IN stock** being that its a 2pc setup it might be easier than the WL ones. T

04-08-2008, 03:10 PM	#6
JJ18Sniper Silver Member Car: 05 Subaru WRX STi Fav Mod: DB 20G, Diamond Black BBS RE's, S2K retrofit Location: Westchester, NY Posts: 4,461 Join Date: Jul 2004 Trader Rating: (5)	*Re: New* Botox Bolts IN stock** Nice, definitely a possibility to do now

04-10-2008, 11:21 AM	#7
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	*Re: New* Botox Bolts IN stock** TTT these are FLYING off the shelves!!! get them before the intro price goes up t

04-13-2008, 07:15 AM	#8
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	*Re: New* Botox Bolts IN stock** TTT just finished packaging up a ton more of these kits. get them before the intro price is over. tom

04-19-2008, 06:29 PM	#10
tom@kartboy Authorized Vendor Fav Mod: Most Copied parts on IWSTI! Location: San Diego, CA Posts: 309 Join Date: May 2004 Trader Rating: (3)	*Re: New* Botox Bolts IN stock** TTT last day for the intro special. Tom

04-20-2008, 02:00 PM	#12
*snorky* killer ants in your pants Car: OBP05MURDEREDOUTFTW Fav Mod: Fullerton's Qrack on my car Location: Chicagoland Posts: 3,377 Join Date: Apr 2006 Trader Rating: (21)	*Re: New* Botox Bolts IN stock** Tom, This may be the incorrect place to ask this but... Have you looked into replacing the actual subframe bushings with a higher durometer rubber? I haven't pulled my subframe apart or ever really studied it as far as how the bushings are in place (ie pressed, cast, etc) but it seems like this would be a better solution if it's possible to remove the bushings.