 |
| STI Forum | Shop | Sponsors | Advertise | Rules | FAQ | Members List | Calendar | |||
|
| |||
| Home | Register | Today's Posts | Go Premium | Mark Forums Read | Create a Member Journal | Vendor Deals | Member Classifieds |
06-23-2006, 08:29 PM
| #1 |
| Professional STI Racer Car: 2006 Impreza WRX STI Fav Mod: Flux Capacitor Location: Camp Lejeune, NC Posts: 758
IWSTI Addict since: May 2003 Trader Rating: (5) |  Installing Prodrive rear diff guard... HELP!!! I'm about to attempt to install my new Prodrive rear diff guard, but it says I have to remove the diff mounting nuts on the front of the rear diff and I also have to remove the two lower diff case bolts. When I put the front diff mounting nuts and the two rear lower diff case bolts back in, how much do I torque them down? The Prodrive instructions SUCK! Thanks This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by Jag32; 06-23-2006 at 08:59 PM. |
|  |
|
06-23-2006, 09:58 PM
| #2 |
| Spec C Club Car: '08 BMW 135i Location: Centerville, Georgia Posts: 1,666
IWSTI Addict since: May 2005 Trader Rating: (13) | Not sure about on an '06, but my Subaru Workshop Manual for the '04 STi says: Diff. Cover Bolts: 32.5 ft-lb Front Mounting Nuts: 47.9 ft-lb Hope this helps out a bit. This ad is not endorsed by this member. Please register or login to hide this ad. Last edited by MadMan77; 06-23-2006 at 10:07 PM. |
|
| |
| |
| |
