cel and cruise light

dan850r · 11-10-2003, 12:37 PM

i have a blitz sus, helix downpipe and hks exhaust. the cel and cruise went on after the dp install. how do i fix the problem

**gforced** · 11-10-2003, 12:54 PM

Check all your connections, intake clamps, vacuum hoses, and bolts to make sure everything is in place and tight.

sc00by71 · 11-10-2003, 05:10 PM

Did you get a MIL eliminator with the Helix downpipe ? If not then you need one. The Helix pipe is completely catless and will set a p0420 catylyst efficiency code. Pony express performance has them. The cruise automatically is disabled when a code is logged.
Shawn

dan850r · 11-10-2003, 07:16 PM

thanks all

11-10-2003, 08:54 PM

I have cel fixes running on about 8 cars,clears the po420 code and the po139 you will get with catless exhaust on the STi

KC

SAMMYBOY · 11-15-2003, 10:54 PM

Same thing happened here: mine is just over a 1k and totally stock. I was driving on the freeway with very low gas in the tank, the car hesitated and the CEL came on as well as the flashing cruise light. I thought I was running out of gas and I took an exit right away, filled up but both lights remained flashing.
I then contacted my Subie Dealer and he advised to disconnect the battery, I also pumped the brakes, waited a few minutes, reconnected the battery and all symptoms disappeared.
I am a bit worried guys and would like to know what happened and if this is gonna happen again in the future. :roll:

SAMMYBOY · 11-15-2003, 11:04 PM

I also lost power soon after the lights came on!

cann · 12-02-2003, 12:26 PM

lost power? put your stock intake back on
then check your grouding

11-10-2003, 12:37 PM	#1
dan850r Amateur STI Driver Posts: 9 IWSTI Addict since: Nov 2003 Trader Rating: (0)	i have a blitz sus, helix downpipe and hks exhaust. the cel and cruise went on after the dp install. how do i fix the problem This ad is not endorsed by this member. Please register or login to hide this ad.

12-02-2003, 12:26 PM	#8
cann Junior STI Driver Posts: 112 IWSTI Addict since: Jun 2003 Trader Rating: (0)	lost power? put your stock intake back on then check your grouding This ad is not endorsed by this member. Please register or login to hide this ad.

New To Site?	Need Help?	More
REGISTER FOR FREE! IWSTI Rules/Signature Rules Create a Member Journal Bookmark IWSTI Tell your friends about IWSTI	Frequently Asked Questions Did you forget your password? Make a suggestion or report a bug Mark Forums Read Contact Us	Member Journals Forum Pictures & Photography Forum GR Series (08+) Marketplace GD Series (03/04-07) Marketplace Hot eBay Deals Forum Beyond Off Topic

11-10-2003, 12:54 PM	#2
gforced Gold Member Car: '04 JBP STi Fav Mod: Swaping a VW for a STi Location: Dallas, TX Posts: 982 IWSTI Addict since: Jun 2003 Trader Rating: (0)	Check all your connections, intake clamps, vacuum hoses, and bolts to make sure everything is in place and tight.

11-10-2003, 05:10 PM	#3
sc00by71 Amateur STI Driver Fav Mod: Subaru Tech Location: Helena MT Posts: 14 IWSTI Addict since: Sep 2003 Trader Rating: (0)	Did you get a MIL eliminator with the Helix downpipe ? If not then you need one. The Helix pipe is completely catless and will set a p0420 catylyst efficiency code. Pony express performance has them. The cruise automatically is disabled when a code is logged. Shawn

11-10-2003, 07:16 PM	#4
dan850r Amateur STI Driver Posts: 9 IWSTI Addict since: Nov 2003 Trader Rating: (0)	thanks all

11-10-2003, 08:54 PM	#5
ITSASTI Guest Posts: n/a	I have cel fixes running on about 8 cars,clears the po420 code and the po139 you will get with catless exhaust on the STi KC

11-15-2003, 10:54 PM	#6
SAMMYBOY Silver Member Car: Silver 04 WRX STi Posts: 111 IWSTI Addict since: Nov 2003 Trader Rating: (0)	Same thing happened here: mine is just over a 1k and totally stock. I was driving on the freeway with very low gas in the tank, the car hesitated and the CEL came on as well as the flashing cruise light. I thought I was running out of gas and I took an exit right away, filled up but both lights remained flashing. I then contacted my Subie Dealer and he advised to disconnect the battery, I also pumped the brakes, waited a few minutes, reconnected the battery and all symptoms disappeared. I am a bit worried guys and would like to know what happened and if this is gonna happen again in the future. :roll:

11-15-2003, 11:04 PM	#7
SAMMYBOY Silver Member Car: Silver 04 WRX STi Posts: 111 IWSTI Addict since: Nov 2003 Trader Rating: (0)	I also lost power soon after the lights came on!