[BoostJunkie]

This is my dad's car. It's garage kept and not driven much, but the clearcoat is extremely soft and marring is tough to avoid. Because the clear is soft and the swirling wasn't very deep, I decided to go light on the polishing. However, 106FF didn't want to cooperate for some reason so I had to get a little creative. The process was:

Wash:
-Wheels w/ P21S gel
-Tires/Wells w/ Zep Degreaser 4:1
-Foam w/ Pinnacle Shampoo in Gilmour gun
-Wash w/ Dawn and Shmitt
-Dry w/ Cobra waffle weave and compressed air
-Spot clay w/ Sonus Green (very little contamination)
-Clay wheels w/ Mother's Yellow clay
-Clean wax residue from clear bra edges w/ IPA and q-tips

Correction:
-106FF (80%) and Clearkote RMG (20%) mix on LC CCS White (6.5" and 4") @ 1600rpm
-Clearkote Pink Moose on LC CCS Grey @ 1000rpm

Finishing:
-Clearkote CMW by hand
-CG Jetseal109 on wheels
-CG Silk Shine on tires
-CG VRG on lower moldings/windshield cowl

Interior (pretty clean to begin with, no pics):
-Vacuum
-Dash/trim w/ Megs QID
-Windows w/ IG and white Cobra waffle weave

Before (P21S gel dwelling on wheels):





Foamed:



After washing and drying:





Taped off for polishing, except for the front bumper which required a LOT of taping around clear bra edges:





And done, after about 14 hours of work over 2 days. It was dark and raining so no sun pics but i used the flash:

[spazegun2213]

OOOOHHHH very nice!!

now, you need to do that to your hotness and snap some pictures

[Phame]

Very. very nice.

[BoostJunkie]

Originally Posted by spazegun2213

OOOOHHHH very nice!!

now, you need to do that to your hotness and snap some pictures

I'll probably do that this weekend. If you look in the background of a few of the pics you can see a little something in the garage that needs to go in first

[BoostJunkie]

Originally Posted by Phame

Very. very nice.

Thanks

[spazegun2213]

Originally Posted by BoostJunkie

I'll probably do that this weekend. If you look in the background of a few of the pics you can see a little something in the garage that needs to go in first

HOT i completely missed that. I SO want a ride in your car now

[Smoke]

Very nice work, and thats one big ass clear bra

[Phame]

Originally Posted by BoostJunkie

I'll probably do that this weekend. If you look in the background of a few of the pics you can see a little something in the garage that needs to go in first

I spy a BBK?

[///M Power]

very nice!

[BoostJunkie]

Originally Posted by Smoke

Very nice work, and thats one big ass clear bra

Thanks. The clear bra covers the front bumper, half of the hood/front fenders, wheel arches, etc. It was a real pain in the ass to tape it all off.

Originally Posted by Phame

I spy a BBK?

That's old news What I'm talking about is propped up against my toolbox.

Originally Posted by ///M Power

very nice!

Thanks

[Phame]

UGH! I said roll cage first and then saw the BBK and changed my post.

[WC LATHE WERKS]

which racetracks are those on the window?

[BoostJunkie]

Originally Posted by Phame

UGH! I said roll cage first and then saw the BBK and changed my post.

Refer to your sig

Originally Posted by WC LATHE WERKS

which racetracks are those on the window?

VIR and Summit Point main.

[Phame]

Originally Posted by BoostJunkie

Refer to your sig

Touche. Well played sir, well played.

[chaos311clarity]

lookin great dan.