Aem Uego Wideband

SubySteve · 05-25-2006, 05:36 PM

Will it work with the streettuner. We I be able to datalog with it.

reid-o · 05-25-2006, 06:52 PM

Quote:

Originally Posted by SubySteve

Will it work with the streettuner. We I be able to datalog with it.

I don't think it's officially supported.
Perhaps someone on wrxforums.com has created a DLL for it. Try and search the street tuner forum there or give them a call.

I believe right now the officially supported widebands are:
Zeitronix zt2
Innovative LC1 and LM1
and
PLX r300 and r500

cnstman · 05-25-2006, 07:54 PM

the PLX M300 USB is also supported. the USB denotes that it has a usb output. i have it works great.

ZuMBLe · 05-26-2006, 07:55 AM

I've heard about problems getting the LC-1 to work with ST. I went with the M300 USB also. I haven't gotten it in yet but I'm sure it will work since it's endorsed by Cobb.

trbolvr · 03-04-2007, 05:15 PM

Is the PLX SM-AFR+ DM-5 AFR compatible with the Cobb streettuner datalogging.
http://www.plxdevices.com/products_SMAFR.htm
I am looking for a wideband for a reasonable price (sub $300) that I can also datalog with it. Also want a round gauge type display.

trbolvr · 03-06-2007, 06:54 PM

Any update on the AEM wideband compatibility with the streetuner software?

crystal_Imprezav · 03-06-2007, 07:59 PM

no go

C-Nears · 03-07-2007, 04:27 AM

Don't use the AEM wideband. They suck, I had one it didn't even come close to measuring the same as what the dynos wide band measured. It pretty much is only reads 14.7, then either rich or lean. Worst mod I did.

H8rade · 03-07-2007, 05:03 AM

Bah, I disagree, my AEM wideband is right on. It matched what was on the dyno wideband within 0.1. You may have had a defective unit.

What I am looking to know if there is a way to datalog the wideband to a laptop. There are output wires, but can they be hooked to anything for datalogging other then an AEM EMS?

trbolvr · 03-07-2007, 05:12 AM

I am wanting a round gauge style wideband O2 sensor for around $300.
I have found two options, AEM or the PLX SM-AFR + DM-5 AFR. Unfortunately right now neither of these are compatible with Sreettuner.
Anyone know of any other options that meet my criteria? Thanks

H8rade · 03-07-2007, 05:34 AM

Can't you get the LC-1 with an optional round gauge? I think it should cost around $300.

trbolvr · 03-07-2007, 05:47 AM

http://www.innovatemotorsports.com/x...cat=262&page=1
If this is what you are referring to it cost $399.

j87w · 03-07-2007, 08:07 PM

Yeah, Ebay has the LC1 plus XD16 (digital gauge for it) for $320 shipped I believe.

pharo · 03-07-2007, 08:18 PM

sorry to go a bit ot but does the lc-1 have any issues of having off readings when temperatures increase, or does that happen to all wideband 02 sensors?

RacerXS · 03-07-2007, 08:20 PM

Quote:

Originally Posted by H8rade

Bah, I disagree, my AEM wideband is right on. It matched what was on the dyno wideband within 0.1. You may have had a defective unit.

What I am looking to know if there is a way to datalog the wideband to a laptop. There are output wires, but can they be hooked to anything for datalogging other then an AEM EMS?

+1, mine has been right on the money every time.....and I have been on 3 different Dynos with it.
Can't beat it for the $$.

05-25-2006, 05:36 PM	#1
SubySteve STI Driver Car: 04 Subaru WRX STi Fav Mod: Coming Soon Location: HOLLYWOOD,FL Posts: 266 Join Date: Jul 2005 Trader Rating: (0)	Aem Uego Wideband Will it work with the streettuner. We I be able to datalog with it. This ad is not endorsed by this member. Please register or login to hide this ad.

03-04-2007, 05:15 PM	#5
trbolvr STI Driver Car: UGM STi Limited #031 Fav Mod: Gram Lights Location: Middle of KS Posts: 233 Join Date: Dec 2006 Trader Rating: (2)	Is the PLX SM-AFR+ DM-5 AFR compatible with the Cobb streettuner datalogging. http://www.plxdevices.com/products_SMAFR.htm I am looking for a wideband for a reasonable price (sub $300) that I can also datalog with it. Also want a round gauge type display. Last edited by trbolvr : 03-04-2007 at 06:39 PM.

05-25-2006, 07:54 PM	#3
cnstman Spec C Club Car: 04 STi Fav Mod: GT-35R Location: Colorado Springs Posts: 1,326 Join Date: Jan 2003 Trader Rating: (2)	the PLX M300 USB is also supported. the USB denotes that it has a usb output. i have it works great.

05-26-2006, 07:55 AM	#4
ZuMBLe Senior STI Driver Car: 05 CGM FXT Location: NY Posts: 323 Join Date: Feb 2006 Trader Rating: (2)	I've heard about problems getting the LC-1 to work with ST. I went with the M300 USB also. I haven't gotten it in yet but I'm sure it will work since it's endorsed by Cobb.

03-06-2007, 06:54 PM	#6
trbolvr STI Driver Car: UGM STi Limited #031 Fav Mod: Gram Lights Location: Middle of KS Posts: 233 Join Date: Dec 2006 Trader Rating: (2)	Any update on the AEM wideband compatibility with the streetuner software?

03-06-2007, 07:59 PM	#7
crystal_Imprezav Spec C Club Car: Slow 05 STi Fav Mod: Loping Idle Location: Chewy's Garage Posts: 1,881 Join Date: Mar 2005 Trader Rating: (12)	no go

03-07-2007, 04:27 AM	#8
C-Nears Junior STI Driver Car: 2005 WRB STI Fav Mod: Stage 2 Location: West, Michigan Posts: 178 Join Date: Mar 2006 Trader Rating: (3)	Don't use the AEM wideband. They suck, I had one it didn't even come close to measuring the same as what the dynos wide band measured. It pretty much is only reads 14.7, then either rich or lean. Worst mod I did.

03-07-2007, 05:03 AM	#9
H8rade Junior STI Driver Car: 06 EB Evo IX Fav Mod: Me Location: Baghdad, Iraq Posts: 163 Join Date: Sep 2006 Trader Rating: (0)	Bah, I disagree, my AEM wideband is right on. It matched what was on the dyno wideband within 0.1. You may have had a defective unit. What I am looking to know if there is a way to datalog the wideband to a laptop. There are output wires, but can they be hooked to anything for datalogging other then an AEM EMS?

03-07-2007, 05:12 AM	#10
trbolvr STI Driver Car: UGM STi Limited #031 Fav Mod: Gram Lights Location: Middle of KS Posts: 233 Join Date: Dec 2006 Trader Rating: (2)	I am wanting a round gauge style wideband O2 sensor for around $300. I have found two options, AEM or the PLX SM-AFR + DM-5 AFR. Unfortunately right now neither of these are compatible with Sreettuner. Anyone know of any other options that meet my criteria? Thanks

03-07-2007, 05:34 AM	#11
H8rade Junior STI Driver Car: 06 EB Evo IX Fav Mod: Me Location: Baghdad, Iraq Posts: 163 Join Date: Sep 2006 Trader Rating: (0)	Can't you get the LC-1 with an optional round gauge? I think it should cost around $300.

03-07-2007, 05:47 AM	#12
trbolvr STI Driver Car: UGM STi Limited #031 Fav Mod: Gram Lights Location: Middle of KS Posts: 233 Join Date: Dec 2006 Trader Rating: (2)	http://www.innovatemotorsports.com/x...cat=262&page=1 If this is what you are referring to it cost $399.

03-07-2007, 08:07 PM	#13
j87w Senior STI Driver Car: 06 STi Location: New Mexico Posts: 393 Join Date: Oct 2006 Trader Rating: (1)	Yeah, Ebay has the LC1 plus XD16 (digital gauge for it) for $320 shipped I believe.

03-07-2007, 08:18 PM	#14
pharo The Next Petter Solberg Car: OBP STi Fav Mod: really quick left foot & anything made my TIC Location: thousand oaks Posts: 901 Join Date: Apr 2005 Trader Rating: (0)	sorry to go a bit ot but does the lc-1 have any issues of having off readings when temperatures increase, or does that happen to all wideband 02 sensors?