- Stock STi brembo rotors... does anyone get them cut?
- ROTORS: Why not cheap blanks from Napa? Corvette guys do it? (might not be for STi)
- Bed-in process for rears only?
- Just flushed brake. Is there a problem?
- Motive Brake bleeder... couple questions before I bleed
- Bye Bye OEM brakes.
- Brake fluid loss
- ABS Light
- Rotors glazed TO HELL at 10K miles... What to do?
- Motul RBF660
- Welded nut for a-arm bolt broke off the frame! Mods please move to suspension
- When to replace Brembo Brake Piston Boots?
- Brake Upgrade Ideas - AutoX / Daily Driver
- Any advancements for pad knockback cure?
- Time to bleed the brakes...
- changing brake feel??
- Need advice about odd rotor wear
- Group N Gravel 4pot/2pot brakes
- changing pads in a wrx is different because of brembos?
- Help me pick my brakes!!!
- Melted Passenger-Front Tie-Rod Seal!!!!!
- Where can I buy front calipers?
- uneven wear why?
- What do you guys think of these rotors?
- Do you need to bleed bakes after installing new pads?
- STi - Easiest Brake Job Ever
- Squeekest pads ever? AXXIS ULT installed
- hitting the track, recommend a set of pads
- Hawk HP+ Pads
- ABS and brake light remain on after startup
- Brake problem after lots of curve
- good brake pads? Hawk so i hear?
- brembo slotted vs. dba slotted
- Pulse feel in the pedal with Ferodo pads
- How long will original brake rotors on an STi(05') roughly last?
- brake squeel
- Brakes
- brakeman should make rear lightweight rotors too.
- Attn: STI OWNERS!! Torque spec for front caliper bolts
- rotor and pads info